Suchergebnisse
NaNu3 - Parametric Planning for a Sustainable Roof (Blue, Grey and Green)
Demonstration of the feasibility and validation of a parametric model that can evaluate the practical and financial feasibility of the combined use of roof areas as well as its microclimate and environmental effectiveness at an early planning stage.
NETSE - Nutzerorientierte Entwicklung von Technologien und Services für Energiegemeinschaften
Im Projekt NETSE werden Grundlagen für die Etablierung von Erneuerbaren Energiegemeinschaften entwickelt. Dies umfassen die Ausstattung von relevanten technischen Einheiten mit geeigneten Schnittstellen, die Entwicklung einer Datenplattform für die Abwicklung von Aufgaben im Zuge des Betriebs von Energiegemeinschaften, die Entwicklung eines Tools zur Optimierung der technischen Spezifikationen sowie den Betrieb einer Energiegemeinschaft.
NETSE - User orientated development of technologies and services for energy communities
In the NETSE project the basics for the implementation of energy communities are developed. This includes the relevant technical equipment and interfaces, the development of a platform for the operation of an energy community as well as tools for the optimization of the technical setup and the operation of energy communities.
INReS - Integration nachhaltiger Regenwassermanagement-Tools in die Planungs- Ausführungs- und Bewirtschaftungs-Software (BIM)
Sondierung zur Vorbereitung und Bewertung der Anwendbarkeit einer interaktiven Webanwendung zur Empfehlung geeigneter Maßnahmen im Umgang mit Regenwasser im Bestand sowie bei Neubauten, die erstens eine BIM-Kompatibilität für die objekt-bezogene Umsetzung zulässt und zweitens eine vereinfachte Anwendung in Form der Regenwasser-Toolbox ermöglicht.
INReS - Integration of sustainable stormwater management tools into planning execution and management software (BIM)
Exploration to prepare and evaluate the applicability of an interactive web application to recommend appropriate stormwater management measures for existing and new buildings that allows for (1) BIM compatibility for object-based implementation and (2) simplified application in the form of the stormwater toolbox.
Energie2POG - Hybrider Energieverbund am Pogusch - Erneuerbare Energien und kosteneffizienter Betrieb
Ziel des Projektes war die Konzeption, Optimierung und Demonstration eines hybriden hinsichtlich betrieblicher Stoffströme optimierten Energieversorgungssystems für einen Gastronomie und Hotelbetrieb in exponierter Lage. Das Konzept ermöglicht die Integration und Einbindung betrieblicher Stoffströme in das Wärme- und Energieversorgungssystem.
Piezo-Klett: Entwicklung piezoelektrischer Klettanwendung zur Energieversorgung aktiver Sensorik im Bauwesen
Das vorliegende Projekt betrachtete Gebäude, Gebäudeteile und ihre Anschlüsse (Bauteilknoten) als Energiegeneratoren, indem durch die Anwendung der Klettverbindung in Kombination mit dem piezoelektrischen Effekt ein so genanntes Energy Harvesting betrieben wird.
Piezo-Klett: Development of piezoelectric hook-and-loop application for the energy supply of active sensor technology in the building industry
The present project considered buildings, parts of buildings and their joints (component nodes) as energy generators by using the hook-and-loop fastener in combination with the piezoelectric effect to perform a so-called energy harvesting.
CO2-Demobau - Sondierung zur Durchführbarkeit CO2-neutraler Demonstrationsbaustellen
Durch Aufzeigen von grünen Innovationen, Vernetzung mit Stakeholdern der Baubranche und Anwendung der Erkenntnisse der Vorstudie "CO2 neutrale Baustelle" wird das Fundament für zukünftige CO2-neutrale Demonstrationsbaustellen gelegt. Diese Baustellen dienen als Best-Practice-Beispiele für die Bereiche Vergabe, Baubetriebsorganisation und -technologie.
CO2-Demobau - Exploration of the feasibility of carbon-neutral model construction sites
By highlighting green innovations, networking with stakeholders in the construction industry and applying the findings of the previous study "CO2 neutrale Baustelle", the foundation is set for future carbon-neutral model construction sites. These construction sites will serve as best-practice examples in the fields of contracting, construction operations organization and technology.
DRoB - Drohnen und Robotik für effizientes Monitoring und Pflegemanagement von Gebäudebegrünungen
Strategische transdisziplinäre Expertenvernetzung zur Analyse innovativer Monitoring und Pflegesysteme für Gebäudebegrünungen. Ziel ist das Aufzeigen der Potenziale unterschiedlicher UAV-Sensoren für das Vegetationsmonitoring sowie von Roboter für die Pflege von Bauwerksbegrünungen.
AFOM - Automatisierte Fehler- & Optimierungsanalyse durch Messdatenerfassung
Im Projekt sollen Methoden entwickelt werden, um aus den Messwertverläufen Informationen über den Betrieb sowie Betriebsveränderungen zu erkennen und einer Fehlerbehandlung zuführen zu können. Durch die Einbindung von BIM-Daten aus dem Gebäude sollen entsprechende Modelle zur Validierung der Heizung, Lüftung, Klima (HLK)-Netzwerke erzeugt werden, welche zur Analyse herangezogen werden.
AFOM - Automatic failure and optimisation analysis by data-acquisition
In the project, methods will be developed for analysing measured value curves to detect changes in operation or failures in the system. By integrating BIM data of buildings, corresponding models will be generated to validate the heating, ventilation, and air conditioning (HVAC)-networks, which will be used for analysis.
CO2 neuBau - Die CO2 neutrale Baustelle: Ein Beitrag zum Klimaschutz der österreichischen Bauwirtschaft
Identifikation aller auf Baustellen anfallenden direkten und indirekten CO2- bzw. THG-Emissionen. Analyse der Rahmenbedingungen und Technologien, um Möglichkeiten für deren Steuerung aufzuzeigen. Gleichzeitig wurden Mehrwerte wie beispielsweise Kosten- und Nutzen-Vorteile einer CO2-neutralen Baustelle aufgezeigt und quantifiziert.
CO2 neuBau - The CO2-neutral Construction Site: a Contribution to the Climate Protection by the Austrian Construction Industry
Identification of all direct and indirect CO2, respectively, GHG emissions generated at construction sites. Analysis of the framework conditions and technologies towards demonstrating the options for their control. In parallel, added values, such as cost-benefit advantages of a CO2-neutral construction site, were outlined and quantified.
Stanz+ - Ein innovatives, energie-flexibles Plusenergiequartier - der Ortskern der Gemeinde Stanz
Stanz+ arbeitet an der Umsetzung einer Energiestrategie für strukturschwache Gemeinden mit konkreten Maßnahmen zur Revitalisierung und Nachverdichtung im Gebäudebestand sowie der Integration erneuerbarer Energieträger am Beispiel der Gemeinde Stanz im Mürztal (Obersteiermark). Das Projekt beinhaltet multiplizierbare Ansätze in Richtung Energieautonomie, hybride Nutzung von Energienetzen zur Flexibilisierung und energetisch gedachte Dorfkernbelebung unter Einbeziehung der NutzerInnen in die „Rural Pioneers Community“ zur Nutzung von Energiedienstleistungen.
Stanz+ - An innovative, energy-flexible plus-energy district - the centre of the village Stanz
Stanz+ is working on the implementation of an energy strategy for structurally weak municipalities with specific measures for revitalisation and re-densification in the building stock as well as the integration of renewable energy sources in the municipality of Stanz im Mürztal (Styria). The project includes multipliable approaches towards energy autonomy, hybrid use of energy networks for flexible usage and an energetic revitalisation of the village centre with the involvement of users in the "Rural Pioneers Community" for the usage of energy services.
BIMBestand - BIM-basiertes Bestandsmanagement von Gebäuden
Ziel war es, Informationsanforderungen und Prozessbeschreibungen für die Anwendung von TGA-BIM-Modellen im Facility Management abzuleiten und diese Modelle im Sinne einer durchgängigen Datenkette und Open BIM gewerkübergreifend über den gesamten Lebenszyklus einzusetzen. Dafür wurden softwaretechnische Lösungen zur Nutzung des offenen IFC-Datenaustauschformates in der Open-Source-Plattform SIMULTAN und in Softwaresystemen der operativen Betriebsführung entwickelt und anhand von vier typischen Use-Cases getestet und evaluiert.
BIMBestand - BIM-based management of existing buildings
The objective of this research project was to develop information requirements and process descriptions for the application of BIM models related to building services in facility management and to demonstrate the lifecycle-oriented use of these models in an open BIM environment. For this purpose, software solutions for the use of IFC in the open-source platform SIMULTAN and building management software were developed and evaluated on the basis of four typical use cases.
Energy2POG - Hybrid Energy Cluster Pogusch - Renewable energies and cost-efficient operation
The aim of the project was the design, optimisation and demonstration of a hybrid energy supply system as well as optimised material flows for a restaurant and hotel business in an exposed location. The concept allows the integration of material flows into the heat and energy supply system.