Suchergebnisse

Stadt der Zukunft

see-it - Kamerabasiertes, nutzerzentriertes Tageslicht-Steuerungssystem für optimale Arbeitsumgebungen

Im Projekt "see-it" werden Technologien im Bereich Hochbau und Building Automation für Qualitäts- und Performanceverbesserungen am Arbeitsplatz erforscht. Ziel ist die Individualisierung der Steuerung des Sonnenschutzes auf die vor Blendung und Überhitzung zu schützenden und auf Durchsicht hoffenden Personen.

Haus der Zukunft

Development of a "Light Well" for daylight transparent, highly energy-efficient, multi-story buildings

Daylight supply of multi-story buildings with the help of rooflight openings. Reflecting vertical ducts transport light down to the lower­most floor. The idea promises new building structures with daylight transparency and high energy-efficiency that have a minimal demand of artificial light and cooling at optimal comfort.

Fabrik der Zukunft

Einsatz und Entwicklung von in die Fassade integrierten Sonnenkollektoren für mehrgeschoßige Wohn- und Bürobauten

Entwicklung von Fassadenkollektoren für eine mehrgeschoßige Bauweise, die hohen ästhetischen Ansprüchen gerecht werden

Haus der Zukunft

ProKlim+ - Use of Model Predictive Control to optimize solar power consumption in case of increased energy efficiency.

Using weather forecast for building automation can help improving the energy efficiency of buildings and, thus, saving energy. In the project ProKlim+ the forecast of solar radiation will be used to optimize the building automation to satisfy the needs of the building users, and at the same time to minimize the energy demand on the one hand and to maximize the consumption of self-produced energy on the other hand.

Haus der Zukunft

Potenzial und Konzepte zur Wärmerückgewinnung aus Abwasser in Kombination mit Solarthermie und Wärmepumpe (WRGpot)

Ziel des Projekts war es, Möglichkeiten zur Reduktion des Energiebedarfs für die Warmwasserbereitung in Niedrigenergie- und Passivhäusern - auf dem Weg zum Plus-Energie-Haus - zu finden. Dabei kam dem Verhältnis zwischen eingesparter Energie und Investitionskosten großes Augenmerk zu.

Haus der Zukunft

e80^3-Buildings - Sub project 3: Development of technology and components

The main objective of the key project "e80^3" was to develop high-performance renovation concepts focusing on plus-energy-buildings. Afterwards these concepts were realized in at least one or two demonstration-projects.

Haus der Zukunft

OptoControl - Modern sensor systems for energy conservation in buildings

The necessary efficiency of modern energy-self-sufficient buildings can only be achieved with intelligent control of the key parameters. The main focus of the project is the adaptation of optical sensor concepts for application in building technology. The future goal of the project is to supply the modern energy-plus-house with an appropriate and intelligent control device to minimize energy loss.

Haus der Zukunft

Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps (WRGpot)

The objective of the project is to find possibilities for the reduction of heat demand for hot water preparation of low energy and passive house buildings, in order to advance a further step into the direction of plus-energy buildings.

Haus der Zukunft

Entwicklung eines kostengünstigen, wärmetechnisch optimierten Fensters aus Holz und ökologischen Dämmstoffen.

Entwicklung eines innovativen Fenstersystemes zur Nutzung passiver Solarenergie, unter dem Gesichtspunkt ökologischer Materialauswahl und stofflicher Trennbarkeit, im Anwendungsfeld vom Dreiliter- bis hin zum Passivhaus.

Haus der Zukunft

Thermocollect - Solar active facade system, using direct solar radiation for temperature conditioning of buildings

The new Thermocollect Energy-Facade System allows to utilize the solar radiation that hits the facade on a on-demand-basis. The system works with a mechanically active mechanism which selectively gathers the solar radiation and additionally can be used as a cooling and heating system according to the local requirements.

Haus der Zukunft

smart façade - energetische Potentiale von adaptiven Fassadensystemen

Ermittlung der energetischen Potentiale von adaptiven Fassaden­systemen unter Einsatz eines eigens dafür entwickelten Simulations­modells. Das dynamische Verhalten der physikalischen Eigenschaften von adaptiven Fassaden wird dabei von den NutzerInnen und den klimatischen Umgebungsbedingungen beeinflusst. Ziel war die Abbildung einer adaptiven Fassade mit maximalem Komfort für die NutzerInnen bei gleichzeitig minimalem Energieeinsatz.

Haus der Zukunft

Thermo-Active Building Systems - Development of a Calculation kernel (TBA-CALC )

This project result will provide Austria with a uniform software environment for the simulation of thermo-active building systems in the form of a validated tool.

Haus der Zukunft

Modularer Energiespeicher nach dem Sorptionsprinzip mit hoher Energiedichte (MODESTORE)

Saisonale Speicherung von Solar erzeugter Wärme, für den Einsatz in Niedrigenergie- und Passivhäuser im Alt- und Neubau.

Haus der Zukunft

PV-Arc Detection - Circuit supervision using DC-Arc Detection in PV systems on dwellings.

It was the aim of this project to make a technology leap in the safe and realistic detection of DC arcs. In reality the variety of conditions of ignition is huge and therefore not covered by the standards and most available products. The focus of this project was the research of conditions of ignition, to derive new detection methods based on the outcomes.

Haus der Zukunft

ThinkHome: Improved energy efficiency based on artificial intelligence in future homes

ThinkHome is a networked controlled home of the future with the ultimate goal to optimise energy efficiency and user comfort at the same time. On this way, smart interaction between all building services is of utmost importance. Goals of this project include the definition of a comprehensive knowledge base that holds all relevant building data, the evaluation of control strategies based on artificial intelligence and machine learning, as well as agent based software engineering.

Haus der Zukunft

smartEXT - Erweiterung der Einsatzgrenzen bewährter Passivhaustechnik

Sondierung der Einsatzmöglichkeiten von Kompaktgeräten (Komfortlüftung mit Kleinstwärmepumpe, entwickelt für Passivhäuser) in Niedrigenergiehäusern. Kompaktgeräte zur Wärmerückgewinnung, Heizung und Warmwasserbereitung decken die Grundlast, Spitzenlasten werden durch eine neuartig konzipierte Zusatzheizung mit verknüpfter intelligenter Regelung abgefangen. Damit wird eine Steigerung der energetischen Effizienz, somit verbesserte Wirtschaftlichkeit, sowie höherer Wohnkomfort bei gleichzeitiger Entlastung der Umwelt erzielt.

Haus der Zukunft

SOLROSE FP - bionisch designter Solarkollektor, finale Produktgestaltung

Ziel war es den innovativen solarthermischen Kollektor SOLrose vom Prototypen zu Serientauglichkeit fertig zu entwickeln. Verbesserungen SOLrose gegenüber Stand der Technik: Ansprechendes Design auch für Fassadenintegration, Serienproduktion der Systembausteine, Verbesserungen für Vertrieb und Montage.

Haus der Zukunft

Thermische Bauteilaktivierung - Entwicklung eines Rechenkerns (TBA-CALC)

Mit dem Projektergebnis steht in Österreich eine einheitliche Software­umgebung zur Simulation der thermischen Bauteilaktivierung in Form eines validierten Tools zur Verfügung.

Haus der Zukunft

Modular and standardised passive houses in solid timber construction

Concerning to an accurate and adaptable construction of 2 to 4 storey solid timber houses with the characteristics of a passive house, a digital construction and dimension system will be developed. The system which contains standardised modular ecological detailed solutions enables an exact dimensioning and installation of passive houses by small carpentering companies.

Stadt der Zukunft

MOTIVE – Modeling, Optimizing, and technical integration of Vacuum-Glazing-Elements

This project addressed the development of construction details for the implementation of vacuum glazing panels in new windows. In this project such constructions (form of frame, thermal bridges, structural aspects, mounting of glass) were explored via empirical experiments and via simulation. As an outcome, a mock-up was constructed, and the findings were documented in a comprehensive document.