There are 513 results.
Innovative, dynamic control concepts shall be developed which enable (air) heat pumps in combination with PV- or renewable grid electricity to use the building mass of a multi-familiy house as heat storage. User acceptance shall be evaluated and possible business models shall be developed.
The aim of the project was the design, optimisation and demonstration of a hybrid energy supply system as well as optimised material flows for a restaurant and hotel business in an exposed location. The concept allows the integration of material flows into the heat and energy supply system.
EnergyCityConcepts - Methods and concepts for the implementation of sustainable energy systems in cities
Two concrete model regions (small city Gleisdorf and urban city quarter Salzburg-Schallmoos) will be developed and tested using new methodical approaches (interdisciplinary urban and regional energy planning, modeling and simulation). Therefore, it is aimed to substantiate scenarios and concepts for the implementation of defined targets on technical, ecological and economic criteria.
In "Enerspired Cities" the concept for an automized junction of judicial secured access regulation to (geo-)energy data is elaborated. This will be adapted to the specific situations in the cities of Innsbruck, Salzburg and Vienna and implemented in dedicated pilot applications. The declared aim is the support of urban planning, monitoring and research by an easy and transparent access to base data coming from various sources for a wide range of users.
Evaluation of mechanical class room ventilation systems in Austria and generation of a planning guideline
Accumulation of technical solutions and practical experience of schools (kindergarten) with mechanical ventilation systems and identification of how pupils and teachers accept the systems.
Evaluation of solar-thermal energy stores using a uniform and marketable system of characteristic numbers
Comparison of solar-thermal energy stores A clear and uniform system of characteristic numbers enables a cost-saving comparison of the efficiency of solar-thermal energy stores of different technologies for the first time and gives important impulses for the market.
In the passive house Utendorfgasse a room–by-room temperature control was installed in 11 apartments. The experiences were evaluated from a technological and from a sociological point of view.
As a contribution to the reduction of CO2 emissions, the project aims at upgrading existing heating networks by adding new devices, so-called exergy trafos, to the heat-exchanging transfer stations. These are driven by district heat and provide heating and cooling, as well as a reduced return temperature, as a service.
Under the project "Building of tomorrow live" over a year long several excursions to "Building of tomorrow" demonstration projects and other passive houses were organised. Sightseeing opportunities were surveyed, updated several times and published on the web.
The aim of the exhibition is to show the compatibility of the building quality standard "Passive House-Standard" with the requirements of the best architectural design with well-chosen examples and explanations. In this way these Austrian cultural and technical achievements shall be made more public.
Exploration of window systems with innovative glass - especially vacuum insulating glass - for building renovation
Exploration of the use of the first fabricable highly insulating vacuum glazing (VG) for highly efficient window systems specifically for the renovation of existing buildings via Verification of the availability and performance of Vacuum Glazing VG worldwide, concepts for structural optimization and thermal simulations of integrated systems, investigation of typical applications and market potential studies and identification of achievable energy savings for single buildings and settlements.
Preparation for the EU Urban Mission by updating goals and strategies (Smart City Wien Framework strategy, Climate-Roadmap), developing a manual for climate-neutral Viennese neighbourhoods and concepts for the participation of citizens (Climate Citizens' Council) and businesses (Climate Agreements), as well as a city-internal capacity and structural planning.
User behavior is a key factor for the energy consumption and the actual energetic performance of a building. A new type of user feedback system will be investigated in this research project. Users provide feedback on the sensed room quality. The data obtained by the feedback system are used to optimize settings of building services in order to improve the energy efficiency and the comfort in the building. A basic proof of concept of this system will be undertaken by means of two use cases.
In the course of the project FFF-TaliSys novel daylighting systems based on freeform surface technology were developed and implemented into functional models, thus, innovative systems that solve the contradictory requirements of daylighting systems.
This project targets the further development of windows with integrated vacuum glazing. Such glass products regularly feature a very low Ug-value, and their dimension is in comparison to insulation glass thin and light. As such, these products offer a new alternative for highly-insulating window constructions, and thus also for energy-efficiency measures in buildings. The project is based on the findings of a previous exploratory project (MOTIVE) and focuses on the construction of functional prototypes of vacuum glass windows together with business partners.
FM.Comfort/FM.Ware - Software for optimizing the use of energie and other resources in the virtual house
The expert system FM.Comfort/FM.Ware realizes the so called virtual house (vh). The virtual house is the computer model of a real building. This computer model supports the optimization of the use of energy and other resources by analysis of the life and work habits of the residents and the positive influence on inhabitants-behaviours (user motivation).
Development of technique and components for the production of back ventilation-free thermal flat collectors.
The goal of FitNeS is the development of modular split heat pumps with compact and silent façade-integrated outdoor units for heating and domestic hot water preparation (and optionally cooling in combination with PV). The outstanding features of the concept are a modular design with a high degree of prefabrication and representing a visually and architectonically attractive, economic and sustainable solution for both new constructions and renovations. One of the main development goals is the minimization of sound emissions by means of optimized flow control.
First energy autonomous revitalization of an urban former industry quarter with the standard type of "Passive House" to reduce primary energy max. 100 kWh/m2 NFL
A renovation with the energy efficient factor 10+ of a former industry quarter in the standard type of passive house with usage of the most modern technologies and locally renewable energy resources.
First remediation of already existing homes to passive house standard with Vacuum insulated panels (VIPs)
Demonstration of the way to redevelop a home of the 19th century to passive house standard in consideration of moisture process and the use of vacuum insulation.