IEA Tasks & Annexe

There are 239 results.

Internationale Energieagentur (IEA)

IEA SHC Task 42/ECES Annex 29: Compact Thermal Energy Storage - Material Development for System Integration

The key accomplishments of the task are summarized in the following points: New material characterizing methods were investigated, a new standard for an improved DSC measurement method has been developed, a data base for PCM, TCM and sorption materials was developed and established, advances in the numerical modelling of materials, compact thermal storage systems were developed for different material applications, a tool for the economic evaluation of thermal energy storages has been developed. Also numerous joint R&D Projects and more than twenty publications arose from the IEA-SHC Task 42 networking activity.

Internationale Energieagentur (IEA)

IEA ES Annex 50: Prefab Systems for Low Energy/High Comfort Building Renewal

Development of integrated concepts for multi-storey buildings, which enable renovations of buildings with high energy efficiency at good user acceptance during the realisation phase as well as afterwards (comfort, affordability). Relevant components: integrated solutions of roof and façade with high rate of pre-fabrication, the possibility of integrating the energy façade/roofs and energy distribution and supply.

Internationale Energieagentur (IEA)

IEA 4E Annex: Electric Motor Systems. Working period 2008 - 2011

Promotion of energy efficiency of poly-phase electric AC motors and motor systems in relevant applications as pumps, fans, compressors and mechanical drives that are generally used in industry, infrastructure and large buildings. This work also included new technologies such as frequency inverters (adjustable speed drive) and permanent magnet motors.

Internationale Energieagentur (IEA)

IEA AFC: Technology Collaboration Programme on Advanced Fuel Cells (2014-2019)

In the AFC TCP, both technology-oriented R&D activities (polymer electrolyte membrane fuel cells, solid oxide fuel cells, electrolysers) as well as analysis to implement fuel cells in commercial applications (stationary and mobile applications) are carried-out. System investigations and modelling complement the activities of this TCP.

Internationale Energieagentur (IEA)

IEA Photovoltaic Power Systems (PVPS)

Enhance the international collaborative efforts which facilitate the role of photovoltaic solar energy as a cornerstone in the transition to sustainable energy systems. The IEA PVPS programme aims to realise its mission through objectives related to reliable PV power system applications, contributing to sustainability in the energy system and a growing contribution to CO2 mitigation.

Internationale Energieagentur (IEA)

IEA Bioenergy Task 42: Biorefinery (Working Period 2007 - 2009)

Austrian Participation on IEA Bioenergy Task 42: "Biorefineries - Co-production of Fuels, Chemicals, Power, and Materials from Biomass", Triennium 2007 to 2009

Nachhaltig Wirtschaften

IEA Bioenergy Task 40: Sustainable International Bioenergy Trade - Securing Supply and Demand (Working Period 2010 - 2012)

Relevant international trade currents of biomass for Austria as well as frame conditions for sustainable use of biomass have been analysed and documented. One of the key issues was to analyse certification procedures for sustainable bioenergy products.

Nachhaltig Wirtschaften

IEA Bioenergy Task 33: Thermal Gasification of Biomass (Working Period 2010 - 2012)

Obtaining, processing and dissemination of information about inter­national development in the field of thermal gasification of biomass as well as leadership of several key aspects of the task.

Internationale Energieagentur (IEA)

IEA EBC Annex 55: Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance & Cost (RAP-RETRO)

The scope of the project is to develop and provide decision support data and tools for energy retrofitting measures. The tools will be based on probabilistic methodologies for prediction of energy use, life cycle cost and functional performance. The impact of uncertainty on the performance and costs will be considered. Methods based on probability give powerful tools that can provide us with reliable ranges for the outcome.

Internationale Energieagentur (IEA)

IEA Energy Efficient End-use Equipment (4E)

The activities of IEA 4E TCP are carried out in four platforms and joint ExCo projects. The active Platforms are: Electric Motor Systems (EMSA), Sustainable Lighting and Controls (SSL), Efficient, Demand Flexible Networked Appliances (EDNA) and Power Electronic Conversion Technology (PECTA).

Internationale Energieagentur (IEA)

IEA Bioenergy Task 38: Greenhouse Gas Balances of Biomass and Bioenergy Systems (Working Period 2004 - 2007)

The main objective of Task 38 is, to calculate, on a full fuel cycle basis, greenhouse gas balances of selected biomass and bioenergy systems by applying and improving the existing standard methodology.

Energiesysteme der Zukunft

IEA SHC Task 32: Advanced Heat Storage Concepts

IEA SHC Task 32 deals with advanced storage concepts for low energy buildings. In the project storages based on phase change materials are used in solar combisystems, in order to reduce the emissions and increase the efficiency of biomass- and gas boilers and to increase the solar fraction

Internationale Energieagentur (IEA)

IEA Bioenergy Task 42: Biorefining - Sustainable Processing of Biomass into a Spectrum of Marketable Bio-based Products and Bioenergy (Working Period 2010 - 2012)

Further development of the biorefinery classification system, identi­fication of relevant biomaterial, development potential for energy and product oriented biorefineries, guideline for sustainability evaluation, global perspective on biorefineries, dissemination of knowledge, networking and involvement of stakeholders, country reports and trainingscourse.Kurzfassung

Haus der Zukunft

IEA SHC Task 37: Advanced Housing Renovation with Solar & Conservation

Development of advanced renovation concepts for residential buildings. For the housing segments with the greatest energy saving potentials strategies for increased market penetration of advanced housing renovation are investigated. Analysing outstanding renovation projects shall lead to technically and economically robust and sustainable concepts for housing renovation.

Internationale Energieagentur (IEA)

IEA 4E Annex: Mapping and Benchmarking

In the Mapping and Benchmarking work (formerly M&B Annex) the following product were analyzed: domestic refrigeration (update), dishwashers, settop boxes, transformers and lights, for which this report includes most relevant results and the related M&B publications. It also introduces the 2015-2016 work on motors, liquid chillers, and water boilers.

Internationale Energieagentur (IEA)

IEA DSM Task 17: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages

The main objective of the proposed Task is to study how to achieve the optimal integration of distributed generation, energy storages and flexible demand, and thus increase the value of distributed generation and demand response and decrease problems caused by intermittent distributed generation (mainly based on RES) in the physical electricity systems and at the electricity market. The Task deals with distributed energy resources both at local (distribution network and customer) level and at transmission system level where large wind farms are connected.

Internationale Energieagentur (IEA)

IEA Bioenergy Task 37: Energy from Biogas and Landfill Gas (Working Period 2010 - 2012)

Key issues for realisation and dissemination of extraction of biogas from byproducts, waste and bioenergy crops were modulated by international experts.

Nachhaltig Wirtschaften

IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment

International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.

Internationale Energieagentur (IEA)

IEA ES Annex 49: Low Exergy Systems for High-Performance Buildings and Communities

The objective of Annex 49 is the development of approaches for reducing the exergy demand of buildings, so as to reduce the CO2 emissions of the building stock and support structures for sustainable and reliable energy systems in the building sector. To achieve the objectives of Annex 49, the following activities have been carried out:Application of exergy analysis and providing tools, guidelines, best-practice examples and background information for planners and decision makers in the fields of construction, energy and politics Support of cost-efficient low-energy/exergy measures for renovation and new building taking into account both the residential and the service sector Promotion of exergy-related performance analysis of buildings, particularly from the perspectives of communities / regions