Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

IEA Hydrogen Task 45: Renewable Hydrogen Production

Due to the increasing pressure to replace fossil fuels with alternatives, the demand for renewable hydrogen supplies is also increasing. In this project, the state of the art of various established and innovative production paths will be collected, processed and then made available to the public.

Actuator based combustion optimization for fine dust reduction

By additive use of actuators in combination of adaptive algorithms a multi-functional logic for fine dust reduction in thermal gasification boiler systems for wood-combustion has to be developed in the context of a thesis at the TU-Graz.

OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors

Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.

Design Guidelines - Solar Space Heating of Factory Buildings With Underfloor Heating Systems (Jaehnig/Weiss 2008)

The energy required for the space heating of factory buildings and warehouses can be a major percentageof the energy consumption of a company. While in some cases, waste heat from other processesin the company is available and is the most cost effective way to heat a factory building, aninteresting option is to use solar energy to cover the heat demand of an industrial building. Englisch

Webinar: Indicators to Assess Resilience of Cooling in Buildings

10. May 2022
Online, AT

Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.

IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment

International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.

IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings

The rapidly increasing cooling demand for buildings - internationally as well as in Austria - requires further development and application of low energy and low carbon cooling solutions on a large scale. The Annex 80 is meeting this challenge boosting the development and implementation of appropriate cooling solutions by transferring knowledge and coordinating international research endeavours.

IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings

In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.

IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks

The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.

IEA-SHC Task 64: Solar Process Heat

The main objective of the task is to identify, verify and promote the role of SHIP (Solar Heat in Industrial Processes) systems as single system and in integrated energy systems. Technical and non-technical barriers will be tackled. The main results of the project are a dimensioning and integration guideline for SHIP and integrated energy systems and a Guideline to Market for SHIP and integrated energy systems.

IEA-SHC Task 65: Solar Cooling for the Sunbelt Regions

Without measures, cooling demand will triple by 2050. The aim of Task 65 is to adapt existing technologies to the boundary conditions of the sunbelt, to find suitable system concepts, to evaluate them and to disseminate the advantages. In addition to system adaptations, the Austrian focus is on life cycle cost-benefit analysis and the further development of existing assessment tools.

Development of a strategy for industrialized serial production of ecological passive houses made out of renewable resources

Development of a strategy for industrialized seria. production of ecological passive solar houses made out of building materials based on renewable resources as foundation for the dissemination of sustainable solutions for the production of prefabricated houses and of single houses.

Using the Sustainability Balanced Scorecard (SBSC) at operational and inter-operational level (ÖKOPROFIT) for reconciliating the systems of objectives in the realm of sustainability

Further development and implementation of the sustainability scorecard for definition of sustainable objectives on cross-company level (local agenda 21 project ÖKOPROFIT) and company level. Comparing the target systems.

RENEWnow - New impulses for the highly efficient energetic renovation of multi-storey buildings and districts

Exploration of an innovative approach for the highly efficient renovation of apartment buildings in Austria. The aim is to develop a new service model (one-stop shop) for property managers and owner associations through a targeted, novel mix of technical and non-technical measures.

LooPi - the autonomous unisex plant-based urinal for public spaces

Application of the prototype in the operational environment for a period of 20 months. Technical monitoring thoughout the cycle of seasons, user interviews concerning satisfaction, evaluation of the potential use of LooPi material streams as soil conditioner for organic farming. Results serve the development towards market maturity.

EPIKUR – Energy efficiency potential of intelligent measures of urban densification

The present research proposal focused on the possibility, implications and consequences of "inwards urban expansion" through densification of the existing urban tissue. In this context, densification is not only approached through known and common aspects of building regulations and guidelines, but in view of what is actually possible to achieve.

NETSE - User orientated development of technologies and services for energy communities

In the NETSE project the basics for the implementation of energy communities are developed. This includes the relevant technical equipment and interfaces, the development of a platform for the operation of an energy community as well as tools for the optimization of the technical setup and the operation of energy communities.

Joining Cards - Investigation of de-constructable fastening and joining techniques for the development of mono-material interior systems made of cardboard

Strategic examination of cardboard products and paper-based materials for the development of de-constructible interior systems and the definition of building components and their interfaces. The result forms the basis for further research projects in the form of a comprehensive knowledge gain.

Reduction of maintenance costs of ventilation systems in plus energy buildings

Maintenance costs for central air ventilation systems are approximately 0,42 Euro/m².a excluding VAT, for decentralized systems 1,16 Euro/m².a excluding VAT. 50% savings in operating costs of apartment passive houses opposed to apartment low-energy buildings [SCH11] can be achieved with maintenance costs of around 0,42 Euro/m².a.

Operational and maintenance costs in passive houses and low energy houses

How much energy does a passive house actually save? Does a passive house pay-off by itself? What are the costs for maintancence? For the first time an approximation for the running costs of a passive house were systematically documented and compared.