Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Guideline for logistic systems and resource management for renewable resources in Burgenland
The project on hand is applied in the Austrian federal state Burgenland. It investigates possibilities to cover the future biomass demand of the county with resources from the county.
e80^3-Buildings - Sub project 1: Basics
Goal of this subproject was to select the building with the highest potential within a building-portfolio. Therefore a criteria catalogue was developed, which is generally applicable.
ecoRegeneration: Development of a "Merit-Order" in order to assess regeneration heat for geothermal probes within urban residential neighbourhoods
In urban residential areas there are not enough active-cooled usages, to use the waste heat of the cooling process as required regeneration heat for geothermal probes; free cooling of the apartments is not sufficient. The project is developing various options (waste heat from commercial uses in the ground floor zones of residential buildings, by using waste heat of data centres, additional installation of heat generation systems for regeneration) within the urban settlement area, business models and is calculating life-cycle-costs of all solutions. The result should be a kind of "merit order" for regeneration heat.
GreenTech-Renovation - Energetic Renovation of Glass Buildings of Architectural Value
The focus of the GreenTech-Renovation project was to find innovative solutions for the energetic renovation of architecturally valuable buildings with a high proportion of glass. A future-oriented building physics concept that includes the use of alternative forms of energy had been developed for this purpose. With ecological and social commitment, an intelligent usage concept could strengthen the energetic renovation concepts and guarantee their sustainability. The 10-Rs of the circular economy (Refuse, Rethink, Reduce, Reuse, Repair, Refurbish, Remanufacture, Repurpose, Recycle, Recover) will serve as a guideline.
The Box - Thermal High Performance Decoupling - Next Generation Thermal Break Technology
The project pursues the overall strategic objective "solution of the problem-inducing heat bridge". For this purpose, the thermal bridging losses should be reduced by the factor of 15 in contrast to the state of the art. The significant increase in efficiency should rely on existing system solutions, but incorporating a new holistic view in terms of construction, geometry and materials.
Product service systems without risk (RISP)
In RISP a process model for the development of product-services is worked out, which consists of seven steps and so called "gates" between the single steps. The questions which have to be answered before entering the gates to the next step are derived from a failure mode and the effect analysis of the single steps.
PROJECT(_)SPACE_ BUILDING_ FUTURE
Knowledge transfer, communication and discussion of the results of the Building of Tomorrow programme in the fields of architecture, planning, construction and companies in the building industry.
Clay - Passiv Office-Building Tattendorf
The motivation for developing the project "Clay Passiv Office-Building Tattendorf" was the dissatisfaction with the situation of a great difference in the state of technology in three fields relevant to the research project: 1) sustainable production of energy , 2) sustainable energy conservation technologies and 3) use of sustainable building materials.
Scenario assessment for the economic market potential of relevant energy technologies.
Economic analyses and scenarios for the future relevance of various sustainable energy technologies considering interaction of technologies, learning effects and exogenous scenario parameters. Recommendations for the future orientation of research and technology development.
Transfer of technology and know-how for the initiation of fermentation gas net feed-in pilot projects.
Target group communication of the technical possibilities of fermentation gas net feed-in. Information preparation and reduction in planning complexity. Support and networking of potential future plant operators. Establishing a service office as contact point.
Smart Pölten 2.0 Holistic view on a Vertical Farm in preparation for a demonstration project for the city of St. Pölten
The city of St. Pölten forsees great potential in Vertical Farming with regard to the objectives related to the concept of the Smart City program - linking local food production, quality of life by reducing resource consumption. This has to be evaluated by combining Vertical Farms with existing living buildings. Eco-social and socio-economic considerations play an important role in this process.
Cooperative Living Volkersdorf (KooWo - Volkersdorf) - sufficiency, space and energy efficiency in the quarter
The jointly planned demonstration project "KooWo" in Volkersdorf aims at reaching sufficiency as well as energy and CO2 reductions in a holistic way. System boundaries are shifted in order not to look only at energy consumption in buildings, relating to unit of floor space, but to consider all use of resources and relating it to persons and social communities.
Production of bioethanol in addition with heat, power and valuable byproducts
The production of bioethanol in Bruck/Leitha in addition to the production of heat, power and valuable by-products from biomass will be optimized by a new process simulation tool under the target of maximum usage of waste and low temperature heat and optimal source and product usage.
Circular Twin - A Digital Ecosystem for the Generation and Evaluation of Circular Digital Twins
By 2030, more than the equivalent of two Earths will be needed to meet the demand for natural resources, therefore a transition to circular systems is essential, especially in the construction industry. The digital "Circular Twin" ecosystem enables the early implementation of circular economy goals as well as end-to-end digitalization in construction utilizing Digital Twins, Generative Design Algorithms and Virtual Reality.
Heat in containers
Storage of industrial waste heat in latent heat storage systems (common transport containers). Use of the heat in commercial enterprises and public or private buildings with integration of conventional energy suppliers. Technical and financial feasibility study.
RAILWASTE - Production of railway sleepers by mixed plastic waste (SUSPRISE Joint Call)
Production of railway crossties ("sleepers") from an alternative (renewable) raw material
Electrical peak load in supermarkets - Strategies to improve energy efficiency
Levelling and reduction of electrical peak load in supermarkets by using additional energy storage systems and by managing the consumption of industrial refrigeration facicilties. Techno - economic feasibility study with high potential of replications via involved industrial partners.
Integration of results of the program "Building of Tomorrow" into the established qualification program of energy counsellors and their daily consultancy activities
Preparing the results of the "Building of Tomorrow" program for energy counsellors by elaborating a material collection and integrating it into the basic education of energy counsellors. Furthermore a one-day training course for already active energy counsellors will be designed and held.
Digitalization in Urban Planning: From Spatial Energy Planning to Digitalization in Construction Engineering (PBM_integrativ)
The project provides a comprehensive overview of conditions and interrelations between administration, economy and planning and to elaborate the most important features and deficits in the flow of relevant information between the different phases of a building’s life cycle - planning, construction and management/administration.
"gugler! build & print triple zero" - subproject 9: Monitoring Gugler - Monitoring, evaluation, optimization GUGLER
The project objective is the measurement of relevant building values (energy consumption, ...), the evaluation of these values compared with the intended objectives and the optimization of the system based on the measured data. As a special innovation, monitoring the storage of alternatively generated electricity using photovoltaic and wind energy in the form of compressed air must be considered.