Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA HEV TCP Task 49: Electric Vehicle-Fire Safety
As the number of electric vehicles increases, so does the need for safety. The project is creating an overview of fire safety standards for electric vehicles and networking relevant stakeholders. Challenges are discussed and experiences exchanged in national and international expert workshops. The focus is on promoting the safety of electric vehicles and increasing their acceptance.
IEA HPT Annex 48: Industrial Heat Pumps, Second Phase
Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.
Webinar: Indicators to Assess Resilience of Cooling in Buildings
10. May 2022
Online, AT
Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.
IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment
International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
The rapidly increasing cooling demand for buildings - internationally as well as in Austria - requires further development and application of low energy and low carbon cooling solutions on a large scale. The Annex 80 is meeting this challenge boosting the development and implementation of appropriate cooling solutions by transferring knowledge and coordinating international research endeavours.
IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings
In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.
IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks
The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.
IEA HPT Annex 57: Showing flexibility benefits through heat pump implementation in multi-vector energy systems and thermal networks
This project analyzes the future implementation of heat pumps in multi-vector energy systems and thermal networks. The aim is to increase the flexibility of the energy system and to use it for various applications, e.g. for system services or to participate in different electricity markets. Using international case studies, influencing factors and potentials for flexibility options will be evaluated and suitable business models will be derived.
IEA HPT Annex 64: Safety measures for flammable refrigerants
New bans on chemicals and the revision of the so-called F-Gas Regulation pose new challenges for the heat pump and refrigeration industry. In this project, new knowledge regarding the safe future use of flammable refrigerants in heat pump and refrigeration systems up to 50 kW for room temperature control and hot water preparation is being developed and made available to the relevant target groups.
IEA HPT Annex 59: Heat Pumps for Drying Processes
Drying processes are highly energy-intensive and widespread in industry and commerce as well as in households in various forms. In this project, the potential for energy savings in drying processes in various applications will be investigated, which can be tapped through the use of heat pumps and made available to the relevant target groups in the form of guidelines, data, etc.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA EBC Annex 86: Energy Efficient Indoor Air Quality Management in Residential Buildings
Residential buildings should be able to provide good indoor air quality while ensuring high comfort and low energy use at lowest possible cost. This project will develop methods and compile data to evaluate different indoor air quality management strategies. Furthermore, innovative control strategies will be evaluated and tested in order to develop concrete recommendations for possible implementations of innovative ventilation systems for residential buildings.
IEA EBC Annex 91: Open BIM for Energy Efficient Buildings
Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.
IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2021-2022)
The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. In the working period 2021-2022, the focus will be laid on the development of extended interoperability tests for decentralised energy resources and micro grids.
IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2013-2018)
The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. By active participation, Austria’s position and leading role on the forefront of international Smart Grids development has been strengthened.
IEA EBC Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings
IEA EBC Annex 89 focuses on the pathways and actions needed by various stakeholders and decision-makers to implement whole life cycle based net-zero greenhouse gas (GHG) emissions from buildings in policy and practice. Annex 89 will support key stakeholders and decision-makers in developing and implementing effective Paris-goal compatible schemes and solutions to achieve NetZ-WLC buildings at multiple scales.
IEA HPT Task 41: Cold Climate Heat Pumps
The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.
IEA HEV Task 45: Electrified roads (E-roads)
Electric vehicles can be charged stationary as well as dynamically while driving on so-called "e-roads". From a systemic point of view, this technology can be an addition to stationary charging and is not competing. Internationally, the academic and political discussion in this field is progressing rapidly. Task 45 aims for a mutual knowledge exchange, a joint understanding of next steps and a contribution of the Austrian position into the international debate.
IEA HEV Task 46: LCA of Electric Trucks, Buses, Two-Wheelers and other Vehicles (Working period 2022 - 2024)
The objective of this R&D service is the participation in Task 46 of the IEA Hybrid and Electric Vehicle (HEV) TCP with the work on the internationally agreed topics and the managing of the task as Operating Agent. Beside the Life Cycle Assessment (LCA) studies of typical examples also methods for the assessment of climate neutrality and circularity are developed. This is done in dedicated expert workshops.