Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA IETS Task 18: Digitalization, Artificial Intelligence and Related Technologies for Energy Efficiency and GHG Emissions Reduction in Industry (Working period 2023 - 2024)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
IEA 4E Annex: Electric Motor Systems. Working period 2008 - 2011
Promotion of energy efficiency of poly-phase electric AC motors and motor systems in relevant applications as pumps, fans, compressors and mechanical drives that are generally used in industry, infrastructure and large buildings. This work also included new technologies such as frequency inverters (adjustable speed drive) and permanent magnet motors.
EBC Annex 66 Text: Definition and Simulation of Occupant Behavior in Buildings
Hintergrund, Ziele und Methoden des EBC Annex 66. (November 2014)
D. Yan, T. Hong
Herausgeber: IEA EBC Annex 66
Englisch, 14 Seiten
Downloads zur Publikation
IEA DSM Task 17: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages
The main objective of the proposed Task is to study how to achieve the optimal integration of distributed generation, energy storages and flexible demand, and thus increase the value of distributed generation and demand response and decrease problems caused by intermittent distributed generation (mainly based on RES) in the physical electricity systems and at the electricity market. The Task deals with distributed energy resources both at local (distribution network and customer) level and at transmission system level where large wind farms are connected.
IEA EBC Annex 55: Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance & Cost (RAP-RETRO)
The scope of the project is to develop and provide decision support data and tools for energy retrofitting measures. The tools will be based on probabilistic methodologies for prediction of energy use, life cycle cost and functional performance. The impact of uncertainty on the performance and costs will be considered. Methods based on probability give powerful tools that can provide us with reliable ranges for the outcome.
IEA EBC Annex 82: Energy flexible buildings towards resilient low carbon energy systems
The aim of the Annex is to gain knowledge about the energy flexibility services that buildings and clusters of buildings may deliver to different types of energy networks. The project increases the knowledge about the barriers and motivation for the stakeholders. Their constructive involvement is a key for making building energy flexibility a value for the resilience of future energy networks.
IEA EBC Annex 70: Building Energy Epidemiology: Analysis of Real Building Energy Use at Scale
Within the framework of the IEA-EBC Annex 70, causes of deviations between calculated and actual energy consumption in buildings were empirically investigated and requirements for data quality, characteristics and security were developed. Furthermore, recommendations were developed regarding the use of internationally uniform standards and methods for data collection, processing and evaluation.
IEA SHC Task 59/EBC Annex 76: Deep Renovation of Historic Buildings - Towards lowest possible energy demand and CO2 emission (nZEB)
The goal of Task 59 was to document international best practice examples (knowledge base), develop a multidisciplinary planning process, and develop holistic retrofit solutions for historic buildings. As a knowledge base, the Historic Building Retrofit Atlas (www.HiBERatlas.com) emerged from the project. In the HiBERatlas more than 55 best practice examples are documented. In addition to the management of Subtask A (Knowledge Base) and Subtask C (Conservation compatible retrofit solutions & strategies), innovative technical and organizational retrofit solutions, which have already been applied in national demonstration projects and tested in practice, have been incorporated and further developed through the Austrian participation.
IEA-DHC Annex TS2: Implementation of Low Temperature District Heating Systems
The potential of alternative heat sources is highest at low system temperatures, but current district heating networks are usually high-temperature systems. The aim of the IEA DHC Annex TS2 is to support the transformation of district heating networks towards lower temperatures (the so-called 4th generation). For this purpose, Annex TS2 forms an international platform that enables an exchange on the topics of technology, system, demonstration and competitiveness.
IEA EBC Annex 75: Cost-effective Building Renovation at District Level Combining Energy Efficiency & Renewables
For the conversion of existing buildings into low(st) energy buildings with low greenhouse gas emissions, it is important to know which strategies are most cost-effective to reduce emissions and primary energy consumption of the buildings. In particular, it is important to find the right balance between energy efficiency measures and renewable energy measures. This question is addressed in this project.
IEA HPT Annex 63: Impact of heat pump placement on noise emissions
Noise emissions from heat pumps are a potential barrier for broad market diffusion of this energy efficiency technology, especially in urban areas. In this project, the influences of noise emissions in the building and in the neighbourhood are characterised, their psychoacoustic effects are analysed in more detail, and tools for digitally supporting heat pump placement are further developed. The results will be presented to relevant target groups in the form of guidelines and other documentation.
Co-Operative Programme on Advanced Materials for Transportation Applications (AMT)
The AMT Technology Programme (AMT-TCP) focuses on creating innovations in material technologies to increase energy efficiency and reduce carbon emissions to allow global warming mitigation.
IEA ES Annex 49: Low Exergy Systems for High-Performance Buildings and Communities
The objective of Annex 49 is the development of approaches for reducing the exergy demand of buildings, so as to reduce the CO2 emissions of the building stock and support structures for sustainable and reliable energy systems in the building sector. To achieve the objectives of Annex 49, the following activities have been carried out:Application of exergy analysis and providing tools, guidelines, best-practice examples and background information for planners and decision makers in the fields of construction, energy and politics Support of cost-efficient low-energy/exergy measures for renovation and new building taking into account both the residential and the service sector Promotion of exergy-related performance analysis of buildings, particularly from the perspectives of communities / regions
IEA AMT Task 12: Novel 2D materials and laser-based surface processes to increase resource efficiency in mobility applications
Friction and wear cause enormous global costs and CO2 emissions. At the same time, machines should become more and more reliable. Within Task 12, new concepts in material development and surface processes are being examined and advanced in order to reduce friction and wear.
IEA ES Annex 50: Prefab Systems for Low Energy/High Comfort Building Renewal
Development of integrated concepts for multi-storey buildings, which enable renovations of buildings with high energy efficiency at good user acceptance during the realisation phase as well as afterwards (comfort, affordability). Relevant components: integrated solutions of roof and façade with high rate of pre-fabrication, the possibility of integrating the energy façade/roofs and energy distribution and supply.
IEA EBC Annex 83 - Positive Energy Districts
A positive energy district (PED) is an urban area/neighbourhood that is able to generate more energy than it consumes and is agile/flexible enough to respond to energy market fluctuations. This is where the IEA-Annex 83 and commissioned leading Austrian research institutions come in to collect, systematise, synthesise and process the knowledge and experience of the international scientific community on PEDs in a form that is understandable for practitioners.
IEA HPT Annex 51: Acoustic Signatures of Heat Pumps
The aim of the project was to increase the acceptance of heat pumps by reducing their noise emissions and vibrations and to reduce market barriers. Using innovative measurement and data analysis methods, influencing factors on the acoustic emissions of heat pump systems and the impact of acoustic protection measures were investigated. The results were prepared in the form of guidelines and recommendations for action.
IEA ES Task 41: Economics of Energy Storage
What is the value of energy storage and how can it be quantified? How can the benefits and value of energy storage be translated into promising business models? The Task will conduct a coordinated methodological assessment of the economic viability of energy storage (electrical, thermal, and chemical) in applications relevant to the energy system. This will be used to derive preferred conditions for energy storage configurations.
IEA 4E Annex: Mapping and Benchmarking
In the Mapping and Benchmarking work (formerly M&B Annex) the following product were analyzed: domestic refrigeration (update), dishwashers, settop boxes, transformers and lights, for which this report includes most relevant results and the related M&B publications. It also introduces the 2015-2016 work on motors, liquid chillers, and water boilers.
IEA EBC Annex 81: Data-Driven Smart Buildings
The latest developments in digitization have the potential to significantly reduce the costs of building operations. The annex is intended to improve access to low-cost, high-quality data from buildings and to support the development of data-driven energy efficiency applications and analyses. This enables the optimization of building controls in real time and offers energy efficiency data and decision support for building managers.