Suchergebnisse
Subjective housing quality as social acceptance test of sustainability
Post occupancy evaluation with residents of four low energy building projects and four conventional residential buildings in the city of Salzburg. (A co-operative project with the Workers Chamber of Salzburg and provincial research into residential building).
"gugler! build & print triple zero" - Subproject 7: Integrated General Planning
The aim of the subproject 7 is to aggregate a "normal" general planning process with innovative additional services. In the spirit of integrated planning in the design a higher number of design parameters must be resolved. This is different to a classic planning process with linear and chronological lined up add ons.
e80^3-Buildings - Sub project 3: Development of technology and components
The main objective of the key project "e80^3" was to develop high-performance renovation concepts focusing on plus-energy-buildings. Afterwards these concepts were realized in at least one or two demonstration-projects.
OptoControl - Modern sensor systems for energy conservation in buildings
The necessary efficiency of modern energy-self-sufficient buildings can only be achieved with intelligent control of the key parameters. The main focus of the project is the adaptation of optical sensor concepts for application in building technology. The future goal of the project is to supply the modern energy-plus-house with an appropriate and intelligent control device to minimize energy loss.
openVALUE - Quality and Weight of Open Spaces of Urban Building Projects
Based on four case studies the comprehensive contribution of open space to the increase of quality in real estate development was presented and provides the basis for the development of application oriented measures of quality management and strategies for innovative solutions.
aspern Vienna´s Urban Lakeside - subproject 3a: Technology Centre aspern IQ
The demonstration project "Technology centre aspern IQ" showed that the energy required for space conditioning (heating, cooling, ventilation, lighting, hot water) can be covered from domestic energy production.
Smart ABC Smart Energy Efficient Active Buildings and Building Clusters
The EPBD recast 2010 targeted "nearly zero energy buildings". This low amount of energy is to be covered by energy from renewable energy sources. The project "Smart ABC" analysed a variety of relevant solution sets regarding the building performance and the renewable based energy supply options. Energetic and ecological impacts were analyzed in order to optimize the integration of renewable energy technologies in building standards and to find answers how to depict a building cluster regarding standards and tools.
First rehabilitation project of a public building to reach passive-house standard
General rehabilitation of the General Secondary School II and the Poytechnic School at Schwanenstadt (Upper Austria) using prefabricated timber wall elements and a newly developed ventilation system optimised for schools
green LIGHT: light, fresh air, exterior space, greening in the large volume PassivHaus
theoretical topics: Optimization of natural light, ambient humidity and of private exterior space, planted over buildings, evaluation of the energetic performance and special challenges of large volume "Passivhaus" residential buildings. applied research: concept for the renovation of a 13 storey residential building for senior citizens built in 1974 to PassivHaus standards, applying the results attained in the theoretical part.
Competence- and knowledge centre of renewable energies and passive house technology
Arrangement of a passive house village for test living in the context of an innovative settlement expansion. Building up a large dimensioned passive house for consulting, training, exhibitions, research and distribution of passive house technology and know-how in the field of energy efficient and sustainable building.
Innovation & Cost efficiency: Building standards for multi family residential buildings at optimal cost (Inno-Cost)
In this project, innovative building standards were examined concerning their economical aspects through the life cycle of a building. By means of life cycle-costs for 40-50 multi family lowest energy and passive house residential buildings on actual data from the day-to-day operation, reliable data and know-how was compiled for the first time, which is to support further market penetration of innovative building standards in the field of multi family residential buildings.
Acceptance and improvement of low-energy-house components as a mutual learning process for users and producers
A social scientific investigation of acceptance and dissemination strategies for controlled ventilation systems with waste heat recovery and a joint heating system in low energy and passive houses.
An analysis of the factors supporting and hindering the market penetration of innovative residential buildings
An empirical analysis of the most important factors in supporting or hindering the market diffusion of selected technologies or different innovative residential concepts.
Sustainable ventilation systems in multi story residential buildings in the conflict areas of hygiene and costs
The goal of this project was to develop guidelines for hygienic and cost-efficient mechanical ventilation systems in residential buildings, in which maintenance and cleaning demands are described. These guidelines are based on existing literature as well as practical experience of the property owners, finally they are based on results of hygienic measurements in existing ventilation systems conducted in this research project.
Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps (WRGpot)
The objective of the project is to find possibilities for the reduction of heat demand for hot water preparation of low energy and passive house buildings, in order to advance a further step into the direction of plus-energy buildings.
Online reference for ecologically rated building construction details suitable for achieving Passivhaus standard
An already well-established web database management system is being adapted to present the contents of a catalogue of building elements for the Passivhaus standard. A wider distribution of the contents and future extensions of the catalogue by distributed workgroups are the promises of the project.
Ventilation and heating in passive houses: Comparison of variants in terms of thermal comfort and sustainability
This projects aims at systematic resarch on thermal comfort and the sustainability of heating passive houses with and without air heating. The results of the comprehensive investigation of different variants will provide valuable information for building developers, planners and for funding decisions.
Thermocollect - Solar active facade system, using direct solar radiation for temperature conditioning of buildings
The new Thermocollect Energy-Facade System allows to utilize the solar radiation that hits the facade on a on-demand-basis. The system works with a mechanically active mechanism which selectively gathers the solar radiation and additionally can be used as a cooling and heating system according to the local requirements.
"gugler! build & print triple zero" - subproject 6: Integration of the C2C production into the flagship project Gugler
Print and media production at the media and communications company gugler GmbH are currently being optimized according to Cradle to Cradle (C2C) criteria. The goal of this subproject is to allow the demands of a C2C production process optimized for exchange with biological cycles to be included into the general planning of the new production building of the company, a pilot project within the "building of tomorrow" program line.
Oekosan'11 - International symposium for high-quality retrofit of large-volume buildings to plus-energy-buildings
The AEE INTEC organized the international congress "ökosan'11 - high-quality retrofit of large-volume buildings to plus-energy-buildings" in September 2011. The position of Austrian companies in international cooperation was strengthened through personal contacts during the conference.