Suchergebnisse
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Green Biorefinery - Primary Processing and Utilization of Fibres from Green Biomass
Tests on optimisation of the essential process unit mechanical fractionation of the primary raw material "green biomass" into a liquid and a solid - fibres containing - fraction. Furthermore, lab and pilot scale tests with respect to technologies and processes for primary processing of the solid fraction (e.g. technologies for obtaining specified well defined fibre fractions, reduction of odour etc.). Finally, lab and pilot scale tests regarding manufacturing of prototype fibre products (fibreboards and adhesives & fillers for the construction sector) based on specific well defined fibre fractions from green biomass as primary raw material.
Assessment of user requirements and technical feasibility of lightweight applications based on renewables
Assessment of user requirements was studied. Furthermore, the technical feasibility of se-lected lightweight applications based on renewables in the furniture and interior design sector is investigated through involvement of all relevant stakeholders (panel manufacturers - further processing enterprises - distributors - consumers) in the value chain.
Identification of services, wood and non-wood products in sustainable forest management
The ecological, economic and social effects of services, wood and non-wood products on sustainable forest management, the marketing potential and the relevance of sustainable measures are analysed.
Sustainability Skills - A qualification programme for founders of new businesses
A modular and web-based "Sustainability Skills" qualification programme on how to think, plan, and act in terms of sustainability and how to successfully apply these skills in a business environment.
New potentials using hardwood with small diameters in forestry and timber industry
Identification of potentials to use hardwood with small diameters (SDH) in Austria with the help of the value added chain from the forest's location to the processor. Analysis and evaluation of availability, quality and market potential.
Two days of Sustainability
During a two days training course managers are trained in sustainable management.
Immobilization of Lipases on Corn Cob Granulate - New Key Technology for Biodiesel Production
The main objective of the project is to improve the method for producing biodiesel by enzymatic catalysis.The target is to find a method to catalyze the production of fatty acid methyl esters by corn-cob-immobilized lipases which can be used in industrial scale.
Reduction of Broke in Paper Production
Development of a measurement and control system that detects paper deformation during production. Thus, broke is reduced, significant savings in energy use are achieved, and the economic efficiency is well increased.
Development of a continuous hydrogen-carbon nanofibers production line
With the development of a hydrogen-carbon nanofiber production in a continuous process carbon nanofibers can be produced in an economic way and at the same time access to environmentally friendly hydrogen is enabled.
BLISS - Business GuideLines Inducing Social Sustainability
Business GuideLines Inducing Social Sustainability (BLISS): a practical guidance based on the instrument 'social performance analysis', its adaptation and application in a pilot enterprise.
Chemistry, process design and sustainable economic development
The results of this project were to deliver the basics for chemical process engineering taking into account the requirements of sustainable development. The proposed results will have to be in conformity with ecological, economic and social requirements for sustainability. Hence the processes will mostly be based on renewable resources.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.
Economical Utilisation of residues from slaughtering and meat processing
By utilising fresh raw materials, the process of producing meat and bone meal can be avoided and products of higher quality may be obtained.
Management of the loads of public water treatment plants - ARAFIT
ARAFIT develops a concept for the regional management of the loads of public water treatment plants in a partnership of planners, operators and major water consumers following the idea of sustainable least cost planning resulting in efficient, flexible and future oriented regional infrastructure.
Solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller
A solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller has been developed. The necessary components were built and tested and finally put together to get an operating pilot plant at the test facility.
"Emerging Sustainability" - Summeracademy `09 for sustainable management
"Heading towards Sustainability" is the central motto for a six-day summer academy. During July 2009 "Emerging Sustainability" will offer an inspiring and activating framework for learning how to successfully implement sustainable development in companies.
Increase in Sales of Vegetable Oils from Austrian Oilseeds by Increase of the Technical Grade with Regard to the Demands of the Varnishing Industry
The cultivation of flax (linseed) in Austria should be enhanced by arrangements to increase the technical grade of linseed oil produced. Austrian agriculture should be enabled to provide raw materials sufficient in batch and technical grade for the Austrian varnishing industry.
"NAWARO-Peat" - Peat replacement products by regional renewable resources
Possibilities to stop the peat usage in horticulture by using renewable resources and biological wastes which are regional available. Efficient economical as well ecological solutions for the usage of alternatives to peat, development and testing of treatment technologies which are necessary to create such a substrate in laboratory and field scale.
Chemical modification of wood particles for high value wood plastic composites
Based on promising preliminary work feasibility and recycling strategy of the modifying process shall be evaluated economically and ecologically.