Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA EBC Annex 67: Energy Flexible Buildings (working period 2015 - 2019)
The project increased the knowledge on building Energy Flexibility and the regarding potential buildings can provide to energy grids. The critical aspects and possible solutions to utilize the Energy Flexibility that buildings can provide were identified and a report of the “Principles of Energy Flexible Buildings” will be published in 2019.
IEA HEV TCP Task 40: Critical Raw Materials for Electric Vehicles
The production of electric vehicles and batteries requires critical raw materials. In Task 40, demand and supply are compared, based on global scenarios of the development of electric vehicle fleets, battery technologies, primary and secondary raw material potentials and recycling technologies. Potential overall ecological and social impacts of raw material and battery production are assessed.
IEA-SHC Task 64: Solar Process Heat
The main objective of the task is to identify, verify and promote the role of SHIP (Solar Heat in Industrial Processes) systems as single system and in integrated energy systems. Technical and non-technical barriers will be tackled. The main results of the project are a dimensioning and integration guideline for SHIP and integrated energy systems and a Guideline to Market for SHIP and integrated energy systems.
IEA-SHC Task 65: Solar Cooling for the Sunbelt Regions
Without measures, cooling demand will triple by 2050. The aim of Task 65 is to adapt existing technologies to the boundary conditions of the sunbelt, to find suitable system concepts, to evaluate them and to disseminate the advantages. In addition to system adaptations, the Austrian focus is on life cycle cost-benefit analysis and the further development of existing assessment tools.
IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment
International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
The rapidly increasing cooling demand for buildings - internationally as well as in Austria - requires further development and application of low energy and low carbon cooling solutions on a large scale. The Annex 80 is meeting this challenge boosting the development and implementation of appropriate cooling solutions by transferring knowledge and coordinating international research endeavours.
IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings
In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.
IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks
The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.
IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2021-2022)
The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. In the working period 2021-2022, the focus will be laid on the development of extended interoperability tests for decentralised energy resources and micro grids.
IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2013-2018)
The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. By active participation, Austria’s position and leading role on the forefront of international Smart Grids development has been strengthened.
IEA SHC Task 48: Quality Assurance and Support Measures for Solar Cooling
The completed IEA SHC Task 48 focused on an enhanced quality improvement and market-support measures for the technology option ‘solar thermal cooling or air-conditioning'. In cooperation with a total of 22 organizations (12 research institutes, 5 universities and 5 companies) from eight countries numerous useful reports and tools have been created to improve the quality of solar cooling systems with significant contribution of the Austrian partners.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA EBC Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings
IEA EBC Annex 89 focuses on the pathways and actions needed by various stakeholders and decision-makers to implement whole life cycle based net-zero greenhouse gas (GHG) emissions from buildings in policy and practice. Annex 89 will support key stakeholders and decision-makers in developing and implementing effective Paris-goal compatible schemes and solutions to achieve NetZ-WLC buildings at multiple scales.
IEA EBC Annex 86: Energy Efficient Indoor Air Quality Management in Residential Buildings
Residential buildings should be able to provide good indoor air quality while ensuring high comfort and low energy use at lowest possible cost. This project will develop methods and compile data to evaluate different indoor air quality management strategies. Furthermore, innovative control strategies will be evaluated and tested in order to develop concrete recommendations for possible implementations of innovative ventilation systems for residential buildings.
IEA EBC Annex 91: Open BIM for Energy Efficient Buildings
Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.
IEA Energy Efficient End-use Equipment (4E)
The activities of IEA 4E TCP are carried out in four platforms and joint ExCo projects. The active Platforms are: Electric Motor Systems (EMSA), Sustainable Lighting and Controls (SSL), Efficient, Demand Flexible Networked Appliances (EDNA) and Power Electronic Conversion Technology (PECTA).
IEA HEV Task 46: LCA of Electric Trucks, Buses, Two-Wheelers and other Vehicles (Working period 2022 - 2025)
The objective of this R&D service is the participation in Task 46 of the IEA Hybrid and Electric Vehicle (HEV) TCP with the work on the internationally agreed topics and the managing of the task as Operating Agent. Beside the Life Cycle Assessment (LCA) studies of typical examples also methods for the assessment of climate neutrality and circularity are developed. This is done in dedicated expert workshops.
IEA SHC Task 69: Solar Hot Water for 2030
Solar water heating will play a crucial role in the decarbonization of the energy system for 2030 and beyond. IEA SHC Task 69 focuses on two technologies which are likely to play the biggest role in the global solar hot water market: thermosyphon and photovoltaic (PV) hot water systems. For these technologies global market surveys, systems and component optimizations, cost reduction analyses and revision of standards are being conducted to accelerate growth in target markets.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.
IEA HEV Task 45: Electrified roads (E-roads)
Electric vehicles can be charged stationary as well as dynamically while driving on so-called "e-roads". From a systemic point of view, this technology can be an addition to stationary charging and is not competing. Internationally, the academic and political discussion in this field is progressing rapidly. Task 45 aims for a mutual knowledge exchange, a joint understanding of next steps and a contribution of the Austrian position into the international debate.