Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

IEA HEV TCP Task 40: Critical Raw Materials for Electric Vehicles

The production of electric vehicles and batteries requires critical raw materials. In Task 40, demand and supply are compared, based on global scenarios of the development of electric vehicle fleets, battery technologies, primary and secondary raw material potentials and recycling technologies. Potential overall ecological and social impacts of raw material and battery production are assessed.

IEA HEV TCP Task 49: Electric Vehicle-Fire Safety

As the number of electric vehicles increases, so does the need for safety. The project is creating an overview of fire safety standards for electric vehicles and networking relevant stakeholders. Challenges are discussed and experiences exchanged in national and international expert workshops. The focus is on promoting the safety of electric vehicles and increasing their acceptance.

Webinar: Future weather data and heatwaves

31. May 2022
Online, AT

Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.

Resilient Cooling of Buildings - Case Studies and Policy Recommendation

20. October 2022
Online

In this webinar EBC Annex 80 experts will present the key findings on resilient cooling policy actions, inlcuding examples from international standards and legislative as well as policy opportunities. Further you will receive an overview of the carried out field studies on resilient cooling and learn from two case studies from India and Belgium.

3rd IEA SHC Task 65 - Austrian National Workshop

8. April 2024
Hotel Europa, Graz, AT

This is the third of three workshops of the IEA SHC Task 65, which takes place at the national level. The purpose of these workshops is to bring together collected Austrian know-how into Task 65 and to reflect the findings of international experts, as well as to test the tools and methods developed.

European Networking Group Workshop: Harmonization and Standardization of Electric Road Systems - Roadside Infrastructure

27. - 28. March 2023
University of Applied Sciences Erfurt, Altonaer Straße 25, 99086 Erfurt, DE

This Workshop aims to initiate harmonization processes for standards and regulations with context to roadside equipment for Electric Road Systems (ERS). A consensus between the different existing ERS technologies should be found and new ways to unearth compatible solutions implementing ERS in Europe should be started.

Solar Heat Worldwide - Markets and Contribution to the Energy Supply 2005

The solar thermal collector capacity in operation worldwide equaled 107.8 GWth corresponding to 154 million square meters at the end of the year 2005. Of this, 90.7 GWth were accounted for by flat-plate and evacuated tube collectors and 16.2 GWth for unglazed plastic collectors. Air collector capacity was installed to an extent of 0.9 GWth. Englisch

Decarbonization of Cities and Communities (Cities TCP)

The Cities TCP is a joint international effort that aims to accelerate the decarbonization in cities by providing a communication platform for relevant expertise of all IEA bodies to the local scale including cities, financing institutions, utilities, service providers and building constructors. Vice-versa, the platform generates evidence-based research questions of cities needs for IEA TCPs.

IEA DHC Annex TS2 webinar: Decreasing district heating return temperatures - How to identify critical substations

04. December 2019
Webinar, AT

In this Webinar, we will present measures to decrease return temperatures in substations and methods to identify where to apply them in order to maximize the impact on the entire system. Results for the network at TU Darmstadt Campus Lichtwiese will be shown as an example.

IEA FBC Implementing Agreement Fluidized Bed Conversion (working period 2017 - 2020)

The technology programme includes the collaboration, the exchange of relevant information and networking in the area of fluidized bed conversion of fuels applied for clean energy production.

IEA HPT Annex 48: Industrial Heat Pumps, Second Phase

Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.

Workshop on Photovoltaic Performance and Reliability

8. April 2016
EURAC research, Viale Druso, 1, Drususallee 139100 Bozen, IT

After the 14th IEA PVPS Task 13 experts group project meeting an international workshop will be held. Content will be Outdoor & indoor inspection methods, Performance monitoring and modelling.

IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings

The rapidly increasing cooling demand for buildings - internationally as well as in Austria - requires further development and application of low energy and low carbon cooling solutions on a large scale. The Annex 80 is meeting this challenge boosting the development and implementation of appropriate cooling solutions by transferring knowledge and coordinating international research endeavours.

IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings

In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.

IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks

The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.

IEA-SHC Task 64: Solar Process Heat

The main objective of the task is to identify, verify and promote the role of SHIP (Solar Heat in Industrial Processes) systems as single system and in integrated energy systems. Technical and non-technical barriers will be tackled. The main results of the project are a dimensioning and integration guideline for SHIP and integrated energy systems and a Guideline to Market for SHIP and integrated energy systems.

IEA-SHC Task 65: Solar Cooling for the Sunbelt Regions

Without measures, cooling demand will triple by 2050. The aim of Task 65 is to adapt existing technologies to the boundary conditions of the sunbelt, to find suitable system concepts, to evaluate them and to disseminate the advantages. In addition to system adaptations, the Austrian focus is on life cycle cost-benefit analysis and the further development of existing assessment tools.

Webinar: Indicators to Assess Resilience of Cooling in Buildings

10. May 2022
Online, AT

Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.

Design Guidelines - Solar Space Heating of Factory Buildings With Underfloor Heating Systems (Jaehnig/Weiss 2008)

The energy required for the space heating of factory buildings and warehouses can be a major percentageof the energy consumption of a company. While in some cases, waste heat from other processesin the company is available and is the most cost effective way to heat a factory building, aninteresting option is to use solar energy to cover the heat demand of an industrial building. Englisch

IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment

International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.