Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
"BIO-VISION II"
At the predefined locations of a dairy in Upper Austria and a brewery in Lower Austria the demonstration units of biogas - fuel cell are to be planned in the detail. Therefore exact economical and technical investigations and documentations will be prepared. Important goals are optimized energetic integration and best economical solutions.
EnerPHit-green concept Modernisation of a historic building with application of an aerogel insulation plaster
This demonstration project shows the comprehensive modernization of a historic building within the constraints of a regional protection zone. By using the Aerogel high-performance insulating plaster, a comprehensive energy-efficient building refurbishment had been realized without changing the outer appearance of the façade.
Financing Models and Strategies for future Energy Infrastructures (FINAMO)
Contribution to decarbonisation 2050: The development of suitable financing models plays a key role when implementing new energy solutions. (Juli 2019)
S - House
Innovative Use of Renewable Resources demonstrated by means of an Office and Exhibition Building
PVOPTI-Ray, Optimization of reflecting materials and photovoltaics in urban environment with respect to energy balance and bioclimate.
Within the scope of the project PVOPTI_Ray the influence of reflection and energy balance on the performance of building integrated photovoltaics (PV) in complex urban environment have been investigated. Equally the influence of PV modules and of the energy conversion of solar energy at the PV module surface has an impact on micro climate and therefore also on pedestrians who are exposed to the radiation fluxes. This was also investigated.
Voltage stabilization by central reactive power control of biogas power plants (Virtual Biogas Power Plant)
A virtual power plant, combining 20 agricultural biogas plants is planned in the south-eastern part of the State of Styria (A). The aim of the project is to realize a central reactive power control system of the biogas plants. Active power of this biogas plants ranges between 1 and 3 MW. Specific goals of the project are increasing grid stability, decreasing long distance reactive power transmission, decreasing energy losses, and decreasing utility costs.
Energy Performance Contracting (IEA DSM Implementing Agreement - Task X)
The objective of this task within the IEA DSM programme is to facilitate the use of performance contracts and other energy service company (ESCO) contracts. In this scenario, the ESCO has taken on the project's performance risk by guaranteeing a specified level of energy savings. Its compensation for this risk is directly tied to achieving savings. The financing for such a project could come from the ESCO, the equipment supplier or a third-party company.
COP5+ - Further development of a heat- and cooling system with seasonal heat storage at the example of Central Europe´s biggest geothermal depth drilling field
The aim was to increase the overall energy efficiency of Plus-Energy-Houses by making the heat excess of summer available for use in winter. This was carried out by improvements of the technology seasonal heat storage to an intelligent overall system. The biggest geothermal depth drilling field in Central Europe has been established.
Buildings of highest energy-efficiency with integrated renewable energy development
For the future supply of energy services the combination of energy efficiency, energy storage and decentralized use of renewable energy in buildings offers itself. The project identified dynamic potentials of possible active and passive energy yields of construction units with use of renewable energy sources, pointed future solutions to energy-efficient and ecological design of building construction-units and united all results to a signpost: From today's passive house to the energy-plus-house of the future.
CO-MOD - Increasing comfort and energy efficiency through improved lighting and air quality in schools - implementation through modular EPC-models and ESCO-networks
In general local educational institutions such as schools and kindergardens have a high average demand for improved comfort and energy efficiency improvements. CO-MOD develops a flexible, modular concept (with provider networks, various financing options incl. "Grandmother"-Energy Services, contract modules) that can also respond to the individual circumstances of smaller objects.
RENEW SCHOOL Austria: Examples and financing models for school renovations
The project aimed at learning from 14 Austrian school buildings, from their financial and cooperation models, meaning successful cooperation between involved parties. The success factors have been derived from these projects and together with 10 best practice schools been published in a brochure. The project supported the Austrian activities in the IEE EU-Projekt RENEW SCHOOL (www.renew-school.eu).
Regional acceptance of biogas power plants - suitability and availability of energy-plants
Development of an calculation tool for future biogas power plant operators and planners to check the regional acceptance of their power plants as well as possible energy-plants and their availability.
Seminar: Energy flexible buildings as a part of resilient low carbon energy systems
13. September 2023
Technology Centre Seestadt - aspern Seestadt, Seestadtstraße 27, 1220 Wien
This seminar is looking into the role of energy flexibility measures and solutions supporting buildings and building neighborhoods in demand response and their use of fluctuating renewable energy sources.
Low Tech - High Effect! An overview of sustainable low-tech buildings: realized best practice examples, innovative approaches, principles and systematic solutions
In this study approaches of low-tech buildings were examined and particularly innovative and representative concepts were documented in detail. The aim was to elaborate the current state of the art and the existing know how and knowledge on the basis of realized examples as well as to show potential for further development.
OPEN LIVING PLUS - building structures and utilization options with high social functionality and plusEnergie-standard for rural regions
In small to medium sized communities in rural Regions there is a high demand for sustainable building and space for innovative living facilities, to satisfy the requirements of current and coming life designs. The project’s intentions were to provide social scientific groundwork, develop building structures and utilization options of high social functionality and to transfer knowledge to decision makers in communities and regional authorities.
LightFromFacade - Optimized Day- and Artificial Lighting by Facades
Multfunctional facades with integrated artificial- and daylighting systems had been simulated and evaluated regarding lighting and energy (lighting quality and energy demand). The results create basics for further façade developments and for academic education.
Solar cooling machine with a cooling power of 2 kW
Development and building of a prototype of a coolingmachine with a cooling power of 2 kW, tests and optimizing on a test facility, connection to a solar unit and utilization for air conditioning.
IEA Action Network "Intelligent Energy Systems": International Smart Grid Action Network (ISGAN TCP)
ISGAN is an international network for the development and exchange of expertise on smart, clean, flexible and resilient power grids ("smart grids"). ISGAN provides a platform for the communication of international experiences, trends and insights for the implementation of smart grid solutions in decarbonized energy systems of the future.
Development of a starch based thermoplastic Biopolymer as substitution of standard polymers in niche applications
Developement of a businessnetwork for the market implementation of biodegradable products made out of renewable substances.
OEKOPLUS-KOMPLEX - Analysis of the technical, economical and ecological preconditions for the establishment and utilisation of plus-energy-buildings and building assemblies
The evolution of the low energy house and the passive house standards to the plus energy standard results in a clear reduction of green house gas emissions as well as the primary energy input. The goal of the project was the determination of the technical, ecological and economic basic conditions for the construction and the use of "plus-energy-buildings" in order to finally realize them.