There are 732 results.
Recovery of biomolecules from condensates of process gases during thermal refinement of wood for the development of new wood products.
The exhaust vapors of the process of refinement of wood are not longer seen as industrial waste but a starting point for added value from products used in the timber industry, which represents a new approach for sustainable utilisation of wood.
Development of a measurement and control system that detects paper deformation during production. Thus, broke is reduced, significant savings in energy use are achieved, and the economic efficiency is well increased.
Reduction of cooling requirements through optimized urban structures and processes and design optimisation in building design (smartKB*)
Based on a systematic listing of appropriate methods, recommended actions have been developed to reduce the cooling requirements in new or renovated buildings on three levels: a) optimization and use of appropriate urban structures, b) design strategies and passive measures for building concepts, c) reduction of cooling requirements through integrated planning processes.
Maintenance costs for central air ventilation systems are approximately 0,42 Euro/m².a excluding VAT, for decentralized systems 1,16 Euro/m².a excluding VAT. 50% savings in operating costs of apartment passive houses opposed to apartment low-energy buildings [SCH11] can be achieved with maintenance costs of around 0,42 Euro/m².a.
To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.
Refurbishment of the former "Puch-Siedlung", built as a housing area for employees of the company "Puch", in Graz Liebenau, in the period from the 1950s to 1970s, as an exemplary model for a refurbishment in "passive house standard" with special thoughtfulness to the tenants. "From domestic fuel to solar self sufficiency"
Refurbishment of an existing villa of the "Gründerzeit" to passive house standard with passive and active solar use
The project shows in an exemplary way how buildings of the time of "Gründerzeit" could be maintained and could offer a better environmental balance including the view of the village and the traffic than a new building. As an example a villa has been converted into a multi-family house within a larger housing project.
Development of an calculation tool for future biogas power plant operators and planners to check the regional acceptance of their power plants as well as possible energy-plants and their availability.
Renew Building - Competence Building and Knowledge Transfer for Climate-friendly renovation with ecological and renewable materials
The project Renew Building provided knowledge about eco-friendly renovation to the target groups (planners, architects, students of architecture, etc.) through theory and practice classes, lectures, an e-learning platform, and in an online knowledge database.
The project aimed at learning from 14 Austrian school buildings, from their financial and cooperation models, meaning successful cooperation between involved parties. The success factors have been derived from these projects and together with 10 best practice schools been published in a brochure. The project supported the Austrian activities in the IEE EU-Projekt RENEW SCHOOL (www.renew-school.eu).
Biopolymers consist of renewable resources. The concept deals with the development and implementation of technologies in the sector of renewable biodegradable materials.
The project investigates possible economic, social and environmental effects of a sustainable energy policy. Within a participatory modelling process a sustainability model is used to simulate different energy scenarios (with a focus on renewable energy technologies) for Austria until 2020.
RENEWnow - New impulses for the highly efficient energetic renovation of multi-storey buildings and districts
Exploration of an innovative approach for the highly efficient renovation of apartment buildings in Austria. The aim is to develop a new service model (one-stop shop) for property managers and owner associations through a targeted, novel mix of technical and non-technical measures.
Based on the latest available technical capabilities, the renovation of Eberlgasse 3 will show that passive house standard is achievable even in a typical 19th century building.
Renovation with passive house technology by master-builder – verified planning documentation – Guide and seminars
The project aims at an increased implementation of passive house technology by the planning as well as the operating master-builder.
Development/preparation of a mobile repair and service-point and pilot-implementation at large company sites or centres with high customer-frequency. Supporting of sustainable product-services - especially repair-services - in connection with efficient logistical and organisational processes in relation to product-service-systems; reduction of market-barriers and sensitisation of the general public for sustainable consumption.
The project follows the aim to analyze and to strengthen the transformative potential of Repair & Do-It-Yourself Urbanism with regard to a fundamental change of the existing poor sustainable handling of commodities in selected urban districts, their infrastructures and dominant business and private household practices into resilient areas.
RepaMobil - Reduction of market barriers for product-service-systems, especially repair- and other household services by setting up central service points at big company sites where a lot of potential customers pass by
Feasibility study / implementation concept for central repair- and service points (mobile or stationary) for repair- and other household services located directly at big company sites; raising the demand for sustainable services by private households.
Reprocessing of used goods - A strategy of sustainability and ist impact on the supply chain of a "factory of tomorrow"
Objective is to improve the competitiveness of reprocessing-activities as strategies towards higher resource productivity.The study will analyse the changes of the supply chain necessary to achieve this beyond the Point of Sale with regard to the re-integration of used goods in the supply chain.
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.