There are 732 results.
ProKlim - Optimisation of Energy Efficiency of automated indoor climate systems by using weather forecasts
Investigation of the basic energy savings potential for buildings in commercial use by including weather forecasts as a variable. Additionally, a concept for integrating weather forecasts into the heating and air conditioning control systems in buildings is planned to be developed. Within the scope of the feasibility study, a detailed analysis of technological possibilities, including both hardware and software, will be conducted.
ProKlim+ - Use of Model Predictive Control to optimize solar power consumption in case of increased energy efficiency.
Using weather forecast for building automation can help improving the energy efficiency of buildings and, thus, saving energy. In the project ProKlim+ the forecast of solar radiation will be used to optimize the building automation to satisfy the needs of the building users, and at the same time to minimize the energy demand on the one hand and to maximize the consumption of self-produced energy on the other hand.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
The project aims a strengthening the market for sustainable Product-Service-Systems (PSS) by clearly identifying success factors and hindrances. Restraining factors and basic conditions are worked out on the basis of best-practice examples.
PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement
Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.
It was the aim of this project to make a technology leap in the safe and realistic detection of DC arcs. In reality the variety of conditions of ignition is huge and therefore not covered by the standards and most available products. The focus of this project was the research of conditions of ignition, to derive new detection methods based on the outcomes.
PV4residents – Innovative Finance Service and Business Model for PV Power Plants of Multiple Dwellings with On-site Use of Electricity
The aim is to develop a business model, which enables a stronger penetration of PV plants on multiple dwellings with self-consumption of produced electricity by the residents. Involvement of the municipality allows to deliver surplus electricity for their needs. Basis of the business model is an analysis of the technical, legal, administrative, user related and economic barriers with participation of stakeholders and to identify best practice solutions.
PVOPTI-Ray, Optimization of reflecting materials and photovoltaics in urban environment with respect to energy balance and bioclimate.
Within the scope of the project PVOPTI_Ray the influence of reflection and energy balance on the performance of building integrated photovoltaics (PV) in complex urban environment have been investigated. Equally the influence of PV modules and of the energy conversion of solar energy at the PV module surface has an impact on micro climate and therefore also on pedestrians who are exposed to the radiation fluxes. This was also investigated.
The core of the project P³Power is the measurement technology NetDetection, which is able to detect the power consumption of a household from any point, e.g. a regular wall socket. Based on this technology a plug&play powerplant, consisting of photovoltaics and battery pack, is realized. The system is able to guarantee 100% self-consumption within flexible aggregates (from single households to whole communes) without any changes of existing infrastructure. The measurement technology will be implemented into digital hardware, evaluated comprehensively in lab and household environment and subsequently new energy service business models are developed.
Development and implementation of contributions to the quality control of innovative technologies in the areas of building services and insulation that are derived substantially from HAUSderZukunft findings.
In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.
R-Bau - Development of a replicable deconstruction strategy for residential buildings to force the recovery-oriented dismantling
The aim of the project was to develop a replicable deconstruction strategy for residential buildings to force the recovery-oriented dismantling. The key aspects of the project are the development of standardized building models in order to analyse the recovery-oriented dismantling process, the design of a deconstruction catalogue and the transfer of the project findings to refurbishment, design and erecting of residential buildings.
Populations with high exposure to noise emissions will generally agree: Noise means trouble. The aim of project RAARA is to develop a simple, intuitive albeit accurate method for reducing noise imissions in urban areas. This method involves placing a noise-source into its planned real-world destination prior to actual installation, by means of augmented reality. The ensuing sound-imissions are then made tangible by means of sound effects and coloured visualizations. This exceptional approach will facilitate planning for heating and cooling devices and thus reduce noise pollution in urban areas. This, in turn, can contribute to an increase in societal acceptance and investment in renewable energy.
Production of railway crossties ("sleepers") from an alternative (renewable) raw material
Application and expansion of knowledge gained in the project Rainbow1 for the production of new, functionalised fibres using renewable resources as well as other fibre manufacturing methods in a pilot plant scale production.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
REC-Businesspark - Investigation of the first Austrian renewable energy community business and industrial park
In the course of the project, the conceptual design of a zero-emission or plus-energy business park in Weiz with a focus on photovoltaics and fuel cells in combination with a Renewable Energy Community (E-EGe) will be carried out. By establishing the park on a "greenfield", all structures can be created according to the requirements of the E-EGe.
Based on a clear definition of the topics and focusing on energy relevant aspects the project will provide an overview on the present points of focus in research on "Smart Cities". Furthermore, future research topics will be defined and evaluated, and action plans for political stakeholders will be elaborated in the framework of two expert workshops.
Reconstruction of residential buildings "Tschechenring": ecologically reconstruction of monumental-protected residential buildings for workers (1880) in Felixdorf
Planning and realisation of a demonstration project for the exemplary reconstruction of monumental-protected residential buildings of the late 19th century or comparable housing estates of the 30s under consideration of energetic optimization, renewable energy sources and regenerating raw materials.