Search Results
SolarCooling Monitor - Evaluation of energy efficiency and operation modes of solar cooling systems for air-conditioning in buildings in Austria
Evaluation of ten newly installed solarthermal cooling systems in Austria as well as a large-scale plant in Lisbon to identify the plant’s performance using a monitoring analysis and comparing simulation.
Plus energy office building - Subproject 3: Austria's biggest plus energy office building
In course of the refurbishment of the Vienna University of Technology (Univercity 2015) Austria´s biggest plus energy office building is going to be built. This project intends to demonstrate not only the technical but furthermore the economical feasibility of plus energy office buildings. Within this building the plus energy concept is fulfilled by optimizing the power consumption of the whole building and the installation of Austria´s largest facade integrated photovoltaic plant.
aspern Vienna´s Urban Lakeside subproject 8: Overall Project Management Landmark Project "aspern+"
The Overall Project Management of the "Leitprojekt" includes the handling and supervision of the sub-projects, the reporting to the programme management and additionally the preparation and distribution of relevant results. Beyond that the project management is responsible to highlight possible synergies within other projects and to - if necessary - include these within the next steps.
ThermSat - pilot training program "Thermal renovation engineer in construction industry"
The goal was to design, offer, evaluate and refine a practical training, adapted to the current development. Aim of the courses is to have well-trained engineers and technicians with practical and theoretical knowledge in the field of thermal renovation of buildings.
IDsolutions - Solutions for the refurbishment within existing building stock with interior insulation
The refurbishment of existing building stock demands solutions within single units. Interior insulation is a suitable technology. The challenge is to bring multiple demands and requirements together to create optimal solutions. Therefore it's necessary to arrange individual system components to form working model refurbishment solutions. The development of such solutions is the aim of the project. Not only durability and quality is to be ensured, but also user acceptance. Increasing the rate of refurbishments is the overall aim of the project.
Basic research on the load bearing capacity and high thermal insulation properties of foam glass granulate
The aim of the scientific investigations is to find the characteristic parameters of foam glass granulate applied as load transfer layer and thermal insulation, to provide the base for the application of a multi functional and economical insulation material at the interface between building and ground for buildings of the future.
BIGMODERN - Subproject 11: Dissemination of project results
The project is part of the flagship project BIGMODERN. It aims at disseminating all relevant results of BIGMODERN in a comprehensive and targeted way. It addresses different target groups, such as decision makers inside the BIG Bundesimmobiliengesellschaft, various users of federal buildings and other real estate companies nationally and internationally.
LTS Flywheel - Long Term Storage-Flywheel: New approaches for increasing the economically usable storage time and safety
Development of the fundamentals for a Long Term Storage (LTS)-flywheel for decentralized storage of electrical energy (e.g. from wind or PV power plants), with a significant increase in storage time (goal: 12 hours) and safety, featuring low system costs. Therefore, the LTS-Flywheel is an essential contribution to the building of the future.
Multifunctional City Nucleus
Sustainable mixed-use utilization of urban commercial and industrial areas with a specific focus on energy-related aspects.
SQUARE - A System for Quality Assurance when Retrofitting Existing Buildings to Energy Efficient Buildings
The project aims to promote a flexible quality assurance management for the retrofitting process. It leads to high quality renovations of residential multifamily buildings regarding energy improvement and improvement of indoor environment.
Participation in CEN TC 350 (sustainability of construction works) - WG4 Economic Performance Assessment of Buildings
Participation in the CEN TC 350/WG4 to develop a standard to evaluate the integrated effectiveness of buildings during their life cycle. Evaluation and integration of national comments in order to prepare the standard for the final vote.
Model Predictive Control of Thermally Active Building Systems and Monitoring of two Test-Boxes
A robust, predictive controller which utilises weather forecast data to control thermally active building systems had been designed, researched and assessed in terms of energy efficiency and comfort compared to standard controllers, especially for cooling purposes. Simulations and real measurements using two "Test-Boxes" with thermally active building systems which are constructed and built for this purpose were used to analyse energy efficiency and comfort. Low complexity and transparency of methods and solutions should allow for transferability of all results to guarantee maximum usability for similar applications.
Urban consolidation Lehen - Subproject 1: Fundamental study for an intelligent e-monitoring
The goal was to refine the energy monitoring for residential buildings as well as to find possibilities to visualise the energy consumption and continuously compare it with the "target consumption" in order to get a signal in time and thereby to be able to communicate it to the users. Different monitoring systems were investigated and the experience was evaluated.
Economic usage of Photovoltaic electricity in buildings
The aim of this project is to optimise the direct usage of PV-electricity produced in buildings. The main question concerning the right dimensioning of the PV generator should be answered in order to achieve a high direct usage rate of produced PV electricity under economic considerations. This analysis will be carried out for various building categories. As result, a calculation method will be developed (incl. report), in order to achieve the optimal, most economic PV system for various building categories and user typologies.
Modular and standardised passive houses in solid timber construction
Concerning to an accurate and adaptable construction of 2 to 4 storey solid timber houses with the characteristics of a passive house, a digital construction and dimension system will be developed. The system which contains standardised modular ecological detailed solutions enables an exact dimensioning and installation of passive houses by small carpentering companies.
e-genius.at: The Open Content knowledge and learning platform
The objective of the project was to develop online teaching materials on the topics energy-efficient buildings and renewable energy sources in collaboration with technical vocational schools and vocational higher secondary schools.
CPC-lightweight construction collector
On the basis of our relieable CPC-collector SOLARFOCUS S1 we develop the CPC-lightweight construction collector to get more material efficiency and maximum output of solar hightemperature energy.
Can sustainable building be realized at reasonable costs?
At the development "residential Passive House Utendorfgasse" were reached very low building costs. Would there be different building costs by using ecological materials and technologies? There will be calculated additional and reduced costs by using the ecological building-catalogue and internal characteristic values of projects that are similar in design.
Gründerzeit with future - demonstration project 3: KA 7 Kaiserstraße - Innovative renovation of a listed Gründerzeit building
A demonstration of how innovative measures, with highly efficient and contemporary standards and taking into consideration comfort and energy consumption, can be applied to a heritage listed building.
PassiveHouseDataBase - International Passive House and Passive House Plus Database
About 3.000 buildings are documented, all of them show a high level of comfort and follow energy and building technique standards for passive houses and plus-passive houses. By integration of object and evaluation data, the database will become the worldwide basis for extremely energy efficient buildings and because of its multilingualism and quality assurance opens up new sustainable export possibilities.