Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA AFC Annex 35: Fuel cells für portable applications (Working period 2014 - 2017)
The aim of Annex 35 of Technology Collaboration Programm on Advanced Fuel Cells of the International Energy Agency (IEA) included information exchange on the status and new developments of portable fuel cell systems such as the direct ethanol fuel cell (DEFC) and the direct borohydride fuel cell (DBFC) and comprised the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units.
IEA UsersTCP: “Empowering all” Gender in policy and implementation for achieving transitions to sustainable energy (Working period 2020-2022)
The Annex supports the design of a more efficient and inclusive energy system by integrating gender perspectives. Based on case studies and best practice examples, country-specific recommendations for inclusive energy policies are being elaborated.
IEA Wind Task 32: Wind LiDAR Systems für Wind Energy Deployment (Working period 2019-2021)
IEA Wind Task 32 (since 2022: Task 52) deals with the challenges of using Wind-LiDAR-Systems and provides a strong opportunity to generate new knowledge by global networking. Energiewerkstatt elaborated in this phase of Task 32 an analysis regarding data availabilities of LiDAR measurement campaigns at different sites in Austria and resumed an organisational role regarding the assessment of uncertainties of LiDAR measurements in complex terrain.
IEA Photovoltaic Power Systems (PVPS)
Enhance the international collaborative efforts which facilitate the role of photovoltaic solar energy as a cornerstone in the transition to sustainable energy systems. The IEA PVPS programme aims to realise its mission through objectives related to reliable PV power system applications, contributing to sustainability in the energy system and a growing contribution to CO2 mitigation.
IEA IETS Annex 17: Membrane filtration for energy-efficient separation of lignocellulosic biomass components
The overarching goal of IEA IETS TCP Annex 17 is to strengthen the network of the Austrian membrane and biorefinery landscape.
IEA IETS Annex 17: Membrane processes in biorefineries (Working period 2020 - 2022)
Overarching goal of IEA IETS TCP Annex 17 was to strengthen the network of the Austrian membrane and biorefinery landscape. The aim was the optimized use of lignocellulose material in biorefineries by using efficient and sustainable membrane technologies. For this purpose, emerging membrane technologies were evaluated towards applications for biomass components valorization and a guidance on integration possibilities of emerging membrane technologies was developed.
IEA IETS Task 11: Industrial Biorefineries (Working period 2022-2024)
Biorefineries producing a portfolio of biobased products or bioenergy are the backbone of the growing bioeconomy. IEA IETS Task 11 aims to minimize greenhouse gas emissions to net zero along different biorefinery pathways. Tools and methodologies for increasing energy efficiency and the use of renewable energies are to be summarized and disseminated to relevant target groups.
IEA SHC Task 52: Solar Thermal & Energy Economics in Urban Environments
IEA SHC Task 52 focused on the analysis of the future role of solar thermal heat in integrated urban energy systems. The potential of solar thermal applications to cover the low-temperature heat demand in future low-carbon energy systems was investigated against the background of the rapidly changing framework conditions in the energy sector. Best practice examples for the integration of solar thermal systems into urban energy systems were evaluated and documented.
IEA IETS Annex 11: Industrial Biorefineries (Working period 2020-2022)
With the increasing market share of bio-based products, the concepts of circular economy are highly relevant for the industry. In this context, biorefineries have established themselves as an explicitly integrative, multi-functional overall concept and essential hub in the use of biomass as a raw material source for the sustainable production of various (intermediate) products (chemicals, valuable materials, energy carriers).
IEA IETS Annex 15: Industrial Excess Heat Recover (Phase 3)
Within the framework of the IEA IETS Annex 15 (Phase 3), potentials for the use of waste heat as well as technologies for its integration are collected, bundled and processed through contributions from national research activities. The contributions of the Austrian consortium included technology development and integration concepts of heat pump and energy storage systems, risk analysis in the implementation of waste heat projects, and work on operation optimization and design of hybrid energy systems.
IEA Industrial Energy-Related Technologies and Systems (IETS TCP)
The Industrial Energy-Related Technology Programme (IETS) focuses on energy use in a broad range of industry sectors. It fosters international co-operation amongst relevant research strands, networking within and across industrial sectors, as well as exchange of information and knowledge between experts from industry, science and politics.
IEA UsersTCP Empowering all: Gender in policy and implementation for achieving transitions to sustainable energy (Working period 2022-2024)
Previous work in the Task suggests that countries with higher income levels pay little attention to inclusive energy (-technology) use and its implications. Therefore, this project focuses on obtaining more data on the gender aspects of energy users through a survey, developing guidelines on inclusive technology development, and communicating the overall research results with interested stakeholders.
IEA IETS Task 21 Decarbonizing industrial systems in a circular economy framework
Energy and CO2 savings through circular economy, especially directly through carbon circularity (CCU), and resource and energy efficiency through industrial symbiosis are two key approaches to decarbonizing industry.
Visualisation of IEA TCPs 2020
International activities for the energy supply of the future are taking place within the framework of IEA's technology cooperation. Visualisations based on a graph database show the extensive activities of the individual technology cooperation programmes (TCPs). The collaborations of countries on individual topics were made clearly visible, too.
IEA IETS Task 15: Industrial Excess Heat Recovery (Phase 4)
Excess heat recovery plays a crucial role in reducing emissions in industry. Through strategic planning and efficient process integration, companies can improve their energy efficiency and significantly reduce their carbon footprint. Task XV facilitates the international exchange of experience and knowledge between different companies. This identifies best practices to promote the implementation of energy-efficient technologies in industry.
Mapping of IEA TCPs
The intention of this project was to visualize the current activities of the IEA Energy Technology Network and to identify possible gaps and overlaps. The mapping includes 185 ongoing tasks and annexes (Status September 2017).
IEA-IETS Task 19: Electrification of Industry
The electrification of industry can make a major contribution to CO2 reduction. The aim of the task was a transfer of knowledge between the international and the state levels. Nationally, the aim was to spread and establish the topic of “electrification of industry” through stakeholder involvement. A comparison of electrification based on roadmaps and resources was carried out and, above all, systemic aspects of electrification of industry were analysed.
IEA IETS Task 17: Membrane processes in biorefineries (Working period 2023 - 2025)
Biorefineries are essential for the transition from petroleum- to a biobased industry. The use of biomass as raw material for recyclable materials, chemicals and energy sources is essential and requires efficient and sustainable production processes. This project aims to strengthen national and international know-how transfer between research and development for membrane-based processes in biorefineries. The focus is on application, improvement and innovation in all aspects of membrane distillation.
IEA-IETS Annex 15: Industrial Excess Heat Recover (Phase 2)
In the framework of IEA IETS Annex 15 potentials of excess heat and technologies for their integration were collected from national research projects, bundled and elaborated on. This way, a broad knowledge base was built on experience gained in carrying out surveys for potential use of excess heat. Experiences with questionnaires, process integration tools and extrapolation of data using existing knowledge about the respective energy systems were exchanged. A process database with detailed process information could also be established, which can be used for further research activities. Also, in the area of policy instruments, recommendations for future measures to increase the use of surplus heat were derived on the basis of national contributions.
IEA IETS Task 18: Digitalization, Artificial Intelligence and Related Technologies for Energy Efficiency and GHG Emissions Reduction in Industry (Working period 2023 - 2024)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.