Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
NETSE - User orientated development of technologies and services for energy communities
In the NETSE project the basics for the implementation of energy communities are developed. This includes the relevant technical equipment and interfaces, the development of a platform for the operation of an energy community as well as tools for the optimization of the technical setup and the operation of energy communities.
Joining Cards - Investigation of de-constructable fastening and joining techniques for the development of mono-material interior systems made of cardboard
Strategic examination of cardboard products and paper-based materials for the development of de-constructible interior systems and the definition of building components and their interfaces. The result forms the basis for further research projects in the form of a comprehensive knowledge gain.
Reduction of maintenance costs of ventilation systems in plus energy buildings
Maintenance costs for central air ventilation systems are approximately 0,42 Euro/m².a excluding VAT, for decentralized systems 1,16 Euro/m².a excluding VAT. 50% savings in operating costs of apartment passive houses opposed to apartment low-energy buildings [SCH11] can be achieved with maintenance costs of around 0,42 Euro/m².a.
Operational and maintenance costs in passive houses and low energy houses
How much energy does a passive house actually save? Does a passive house pay-off by itself? What are the costs for maintancence? For the first time an approximation for the running costs of a passive house were systematically documented and compared.
ECR Energy City Graz - subproject 2: Framework-Plan Energy City Graz-Reininghaus
Main project-issue is the scientific work and the demonstration of the vision of the energy self-sufficient, CO2-neutral city-district Graz-Reininghaus. The Framework-Plan Energy City Graz-Reininghaus shall stimulate an awareness-raising process towards energy-efficient and sustainable city-development.
smart façade - energy potential of adaptive façade systems
A specially developed simulation model is employed to ascertain the energetic potential of adaptive façade systems. The dynamic behavior of the physical properties of the adaptive façade system reacts to both internal and external changing conditions. The goal was the development of an adaptive façade, which helps provide maximum comfort for the building occupants with minimum energy consumption.
SonnWende+ Efficient solutions for photovoltaic energy management based on block chain technology
The project deals with the analysis of Blockchain technology in the context of renewable electricity producers and flexibility as enabler for innovative service concepts, tested in the innovation-lab “Energie Innovation Cluster Südburgenland”. The goal is to find new and efficient Blockchain-based solutions for services in energy management and trading in a local level.
Intensified Density - a small scale densification strategy for the suburbs by using modular construction
The project investigated whether a small scale densification strategy for the suburbs / intermediary cities, using modular construction, and existing infrastructure on empty plots of land, can offer a competing alternative to not only the sprawl of single family dwellings but also to large projects.
Existing building reconstruction and implementation of passive house components
Implementation of passive house components, systems and techniques into the practice of existing building reconstruction, in order to reduce the energy consumption as much as possible and to increase the living quality substantially. Craftspeople and planners, who are specialized in building renovation, should gain access to passive house know-how.
Practicable and passive house capable renovation systems for roof and wall units using high-performance thermal insulation
Renovation of a semidetached house using vacuum insulation panel in area of wall, roof and terrace. The very first time the mechanical mounting systems from VIP is used for special applications in the renovation of facades.
DAKTRis - Dynamic operational behaviour of absorption chillers in Trigeneration Systems
In the present project an absorption chiller will be adapted to meet the specific requirements necessary to integrate it with the CHP unit. By means of hardware-in-the-loop measurements and dynamic system simulations, different system configurations and control strategies will be analysed under dynamic boundary conditions, optimized and evaluated.
Possibilities of urban high-rise multi-storey buildings in a timber-frame method with target course eight or more floors
Research of urban high-rise multi-storey buildings in a timber-frame construction method. Fundamental clarification of the feasibility in relation to the supporting structure, fire prevention and security. SWOT analysis as well as economic, ecological research concerning sustainable design.
LEKOECOS - combined economic-ecological life cycle assessment model
The consumption of ecological and economic resources over the whole life cycle is supposed to be anticipated and optimised in the design process of buildings and refurbishments. A combined life cycle assessment model together with an economic-ecological base element catalogue considering the klima:aktiv criteria was developed based on the structure of the life cycle cost model LEKOS and the ecological valuation tool Ecosoft.
vilFIT – Villach Fit 4 Urban Mission
In this project, measures, strategies and the necessary capacity building for achieving climate neutrality in the city of Villach will be advanced. The focus is on social and structural innovations (participation processes, development of pilot initiatives, public relations, etc.) as well as the definition of networks and structures or controlling and monitoring instruments.
BIMSavesEnergy - BIM-based planning-methods for the assurance of energy-efficiency in the building process
The Building Information Model (BIM) brings about fundamental changes in the planning and construction of buildings, as the common base makes it possible to work closely together across disciplines in construction projects. In this project, BIM-based planning methods were developed, which make the influence of planning decisions on energy efficiency quantifiable and controllable in the management process.
MISSION KS 30 - Mission Klagenfurt climate-neutral and smart until 2030
Updating the Smart City Strategy (SCS) of Klagenfurt to achieve climate neutrality by 2030 and adapting the indicators to the Sustainable Development Goals (SDGs) of the UN. Fulfilling the participation requirements for the urban mission of Horizon Europe "100 Climate-neutral Cities by 2030".
MOTIVE – Modeling, Optimizing, and technical integration of Vacuum-Glazing-Elements
This project addressed the development of construction details for the implementation of vacuum glazing panels in new windows. In this project such constructions (form of frame, thermal bridges, structural aspects, mounting of glass) were explored via empirical experiments and via simulation. As an outcome, a mock-up was constructed, and the findings were documented in a comprehensive document.
Energy Plus House Weber - highest energy efficiency in the tension between tradition and modernity
The tension between tradition and modernity is shown and exemplarily solved on the example of the historic farmhouse "vulgo Weber". The object was converted into an energy plus house with an exceptionally holistic approach and also thought as a demonstration object for a broad public through the touristic use of the house.
Development of a "Light Well" for daylight transparent, highly energy-efficient, multi-story buildings
Daylight supply of multi-story buildings with the help of rooflight openings. Reflecting vertical ducts transport light down to the lowermost floor. The idea promises new building structures with daylight transparency and high energy-efficiency that have a minimal demand of artificial light and cooling at optimal comfort.
BIGMODERN - Subproject 4: Life-cycle cost analysis (LCCA) during the planning process
Creation of technical and organisational preconditions for constructors to integrate life-cycle cost analysis (LCCA) already into the planning process. Furthermore, the findings will be applied within the two demonstration projects of the flagship project BIGMODERN (SP2 and SP3). The publication of fundamental results makes conceptive basics and LCCA-results available for all stakeholders in the real estate industry.