Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Innovative energy services in the sector trade and industry
Systematic reduction of THG in the sector trade and industry through market economical energy services. Research project to improve the energy efficiency of the end user as well as the integration and utilization of renewable energy in the energy service models.
BIGMODERN - Sustainable refurbishment standards of federal buildings constructed between 1950 and 1980
The project aims at developing sustainability and climate protection criteria for the refurbishment of federal buildings of the postwar period. These criteria will be tested for their practical suitability within the framework of demonstration projects. Subsequently, these criteria will be defined as fundamental guiding principles in the planning and building processes for all future BIG retrofit projects.
Options needed to achiece energy-self-sufficiency in the district Güssing
Based on the results of the concept "Energy-self-sufficient district Güssing", in this project feasibility studies for a self-sufficient energy- (model) -system on the basis of regional renewable energy sources in the district Güssing will be elaborated. Thereby the second step towards implementation will be done.
AFOM - Automatic failure and optimisation analysis by data-acquisition
In the project, methods will be developed for analysing measured value curves to detect changes in operation or failures in the system. By integrating BIM data of buildings, corresponding models will be generated to validate the heating, ventilation, and air conditioning (HVAC)-networks, which will be used for analysis.
CircularFood - High-quality products through cascading recycling cycles of residual materials from the food industry
The CircularFood project investigates the material and energetic cascading use of organic food residues from Austrian food production. The aim is to develop innovative processes for the extraction of high-quality protein components, liquid biofertilizers, organic plant substrates and peat substitutes in order to promote the circular economy and reduce CO2 emissions.
Energy Efficiency and Risk Management in Public Buildings (EnRiMa)
The major objective of the project EnRiMa was to develop an internet based decision-support system (DSS) to enable operators of public buildings to increase the system efficiency as well as to reduce the CO2 emissions. The DSS can be linked to existing energy management systems as DESIGOTM. The University of Applied Science Burgenland, Campus Pinkafeld, and ENERGYbase, Vienna, have been used to test and calibrate the EnRiMa DSS.
e80^3-Buildings - Sub project 3: Development of technology and components
The main objective of the key project "e80^3" was to develop high-performance renovation concepts focusing on plus-energy-buildings. Afterwards these concepts were realized in at least one or two demonstration-projects.
Service Systems for Pesticide Application: A Concept for Establishing
Concept development for establishing a service system "plant protection". Clarification of core issues and key factors determining the success of application.
Ecological and Social Efficiency Index - EASEY X
Basing on a model and indicators for valuing sustainability of companies quoted at the prime market of the Vienna stock exchange methods and instruments have been developed to analyse their performance. By the connecting step company data have been collected and analysed by four different methods (SPSS, EVA, SVA, MCA Outranking). On a 100 scores scale five companies exceeded barely the mark 70, 6 rank between 60 and 69 further 5 between 52 and 59. The aim is to launch a sustainability EASEY index 2004 or beginning 2005.
KityVR - Artificial intelligence techniques to implement CityGML models and VR visualization
The goal of the project is to link 3D city models and virtual reality for energy-relevant applications as key-enabler for digital planning, construction and operational management. Missing data will be calculated using statistical enrichment methods.
Economical Utilisation of residues from slaughtering and meat processing
By utilising fresh raw materials, the process of producing meat and bone meal can be avoided and products of higher quality may be obtained.
What does sustainability mean for a cluster in industry?
Inquiry of requirements, implementation of qualification schemes and coaching in the design of sustainability reports for selected companies of the styrian automobile cluster with special emphasis on environmental and social costs.
LTS Flywheel - Long Term Storage-Flywheel: New approaches for increasing the economically usable storage time and safety
Development of the fundamentals for a Long Term Storage (LTS)-flywheel for decentralized storage of electrical energy (e.g. from wind or PV power plants), with a significant increase in storage time (goal: 12 hours) and safety, featuring low system costs. Therefore, the LTS-Flywheel is an essential contribution to the building of the future.
EASEY - Ecological And Social EfficiencY
Developing an integrative concept for the evaluation of sustainability achievements of enterprises noted at Vienna's stock exchange.
Semi-manual dismantling of small electric and electronic equipment
Improving the tecnology of manual dismantling processes of small electric and electronical appliances, used in social enterprises. Via software modules, developed do analise dismantling processes, from dismantling-factories to dismantling-parks.
Green facades with moss plants
Development of moss-covered facade panels by selecting and testing of appropriate moss species, new water storage and adhesive substratum, Materials of the support panels and technical construction details, for year-round green, sustainable, maintenance friendly, affordable building facades
Symbiose-4-I&C - Optimal decentralized hybrid storage technologies among different energy systems -4-Industry and Commerce
The project Symbiose-4-I&C analysed the coupling of existing energy networks/-carriers, established on centralized energy network nodes or directly next to a consumer (households, industry and commerce) and the benefits of applying decentralized storage technologies. The optimal position, dimension and the right storage and conversion technology and an optimal energy wide operation of larger consumer groups were estimated for an urban model region.
Construction of a local biogas grid in Güssing - Technical and economical concept for the implementation
Decentralized energy supply systems are a very important contribution for the use of regional potentials as these technical solutions are always fitted to specific conditions. Local biogas grids should complement already existing technologies and be analyzed accordingly.
i3 - SustainableFoodManagement
It is the aim of the project to develop a model of sustainability management for a company of the meat processing industry. The management model includes strategy development, goal setting, evaluation of achievements of goals and support to the operationalisation of the model in form of an IT-system. The model is designed and implemented for the production processes of the company in year 1, and in the further years for the whole company and the value chain of the company.
Development of a comprehensive procedure within the design of high-speed-cutting processes in consideration of environmental protection and occupational health aspects
In the metal working industry high-speed-cutting (HSC) in connection with minimal quantity cooling-lubrication promises a high potential for saving process materials. On the one hand costs of purchase and disposal of metal working fluids (MWF) decrease, on the other hand the reduction of dermal diseases and emissions of MWF-dusts are expected.