Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

NETSE - User orientated development of technologies and services for energy communities

In the NETSE project the basics for the implementation of energy communities are developed. This includes the relevant technical equipment and interfaces, the development of a platform for the operation of an energy community as well as tools for the optimization of the technical setup and the operation of energy communities.

Joining Cards - Investigation of de-constructable fastening and joining techniques for the development of mono-material interior systems made of cardboard

Strategic examination of cardboard products and paper-based materials for the development of de-constructible interior systems and the definition of building components and their interfaces. The result forms the basis for further research projects in the form of a comprehensive knowledge gain.

Excursions "Building of Tomorrow live"

Under the project "Building of tomorrow live" over a year long several excursions to "Building of tomorrow" demonstration projects and other passive houses were organised. Sightseeing opportunities were surveyed, updated several times and published on the web.

Transferproject: Professional strawbale building - "Virtual building-site", exhibition and instruction material

Strawbale-workshops are considered as the best way to inseminate this ecological building-technique. The "virtual building site" has some decisive advantages over the common situation: it does not depend on the weather, allows the comparative study of different constructing methods and can, as a permanent installation, be used as an exhibition.

IEA HPT Annex 57: Showing flexibility benefits through heat pump implementation in multi-vector energy systems and thermal networks

This project analyzes the future implementation of heat pumps in multi-vector energy systems and thermal networks. The aim is to increase the flexibility of the energy system and to use it for various applications, e.g. for system services or to participate in different electricity markets. Using international case studies, influencing factors and potentials for flexibility options will be evaluated and suitable business models will be derived.

IEA HPT Annex 64: Safety measures for flammable refrigerants

New bans on chemicals and the revision of the so-called F-Gas Regulation pose new challenges for the heat pump and refrigeration industry. In this project, new knowledge regarding the safe future use of flammable refrigerants in heat pump and refrigeration systems up to 50 kW for room temperature control and hot water preparation is being developed and made available to the relevant target groups.

IEA HPT Annex 59: Heat Pumps for Drying Processes

Drying processes are highly energy-intensive and widespread in industry and commerce as well as in households in various forms. In this project, the potential for energy savings in drying processes in various applications will be investigated, which can be tapped through the use of heat pumps and made available to the relevant target groups in the form of guidelines, data, etc.

IEA Hydrogen Task 45: Renewable Hydrogen Production

Due to the increasing pressure to replace fossil fuels with alternatives, the demand for renewable hydrogen supplies is also increasing. In this project, the state of the art of various established and innovative production paths will be collected, processed and then made available to the public.

Actuator based combustion optimization for fine dust reduction

By additive use of actuators in combination of adaptive algorithms a multi-functional logic for fine dust reduction in thermal gasification boiler systems for wood-combustion has to be developed in the context of a thesis at the TU-Graz.

OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors

Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.

Potential for Solar Heat in Industrial Processes (Claudia Vannoni/Riccardo Battisti/Serena Drigo 2008)

The goal of this report, developed in the framework of the IEA Solar Heating and Cooling Programme Task33 and IEA SolarPACES Programme Task IV - Solar Heat for Industrial Processes (SHIP), is to highlightthe potential use of solar thermal (ST) plants to provide heat for industrial applications. In order to fulfil thisaim, several national potential studies were surveyed and compared with a focus on the key results and themethodologies applied. Englisch

IEA EBC Annex 62: Ventilative Cooling

The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.

IEA EBC Annex 86: Energy Efficient Indoor Air Quality Management in Residential Buildings

Residential buildings should be able to provide good indoor air quality while ensuring high comfort and low energy use at lowest possible cost. This project will develop methods and compile data to evaluate different indoor air quality management strategies. Furthermore, innovative control strategies will be evaluated and tested in order to develop concrete recommendations for possible implementations of innovative ventilation systems for residential buildings.

IEA EBC Annex 91: Open BIM for Energy Efficient Buildings

Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.

IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2021-2022)

The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. In the working period 2021-2022, the focus will be laid on the development of extended interoperability tests for decentralised energy resources and micro grids.

IEA ISGAN Annex 5: Smart Grids International Research Facility Network (SIRFN). (Working period 2013-2018)

The Smart Grids International Research Facility Network (SIRFN) aims at improving the implementation of Smart Grids technologies by collaboration between smart grid testing facilities, test beds, and large-scale demonstrations. By active participation, Austria’s position and leading role on the forefront of international Smart Grids development has been strengthened.

IEA SHC Task 48: Quality Assurance and Support Measures for Solar Cooling

The completed IEA SHC Task 48 focused on an enhanced quality improvement and market-support measures for the technology option ‘solar thermal cooling or air-conditioning'. In cooperation with a total of 22 organizations (12 research institutes, 5 universities and 5 companies) from eight countries numerous useful reports and tools have been created to improve the quality of solar cooling systems with significant contribution of the Austrian partners.

Possibilities of urban high-rise multi-storey buildings in a timber-frame method with target course eight or more floors

Research of urban high-rise multi-storey buildings in a timber-frame construction method. Fundamental clarification of the feasibility in relation to the supporting structure, fire prevention and security. SWOT analysis as well as economic, ecological research concerning sustainable design.

LEKOECOS - combined economic-ecological life cycle assessment model

The consumption of ecological and economic resources over the whole life cycle is supposed to be anticipated and optimised in the design process of buildings and refurbishments. A combined life cycle assessment model together with an economic-ecological base element catalogue considering the klima:aktiv criteria was developed based on the structure of the life cycle cost model LEKOS and the ecological valuation tool Ecosoft.

Refrigerating plants in hotel and catering industry

To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.