Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Build4Climate - Demonstration building with a climate room concept at the Innovation Quarter Lavanttal in Carinthia
A new train station is being built near the exit portal of the future Koralm railway tunnel in Carinthia, in connection with a CO2-neutral technology park. The innovative entrance building of the newly developed area will be implemented as a frontrunner with a 'climate room' concept based on thermal component activation and extensive use of renewable energy sources.
SPIDER - Subtraction as a measure to Preserve and Insulate historic Developments by Electric Robots
The purpose of this exploration is to unlock the potential of autonomous, data-driven robots that achieve improvements of the thermal building performance through air entrapments in a continuous process.
"Green Biorefinery - Utilitsation of Grass Fibres"
Basic properties of grass fibres from a green biorefinery will be investigated in order to have a sound base for comparison of grass fibres with other renewable fibres. Selected prototype-products with these grass fibres as main raw material source (e.g. insulation materials, gardening material, animal nutrition) will be developed, tested and evaluated whether they are technologically as well as economically feasible.
Solarenergie Urban - Analysis and evaluation of the economic, energetic and architectural quality of urban solar energy buildings
This project developed energetic and economic optimised planning criteria for multi storey residential buildings for the integration of renewable energy systems in the building shell. The field of new construction and refurbishment had been investigated.
FABRIKregio - Development, test and spreading of models for the self-evaluation of sustainability at enterprise level under special consideration of regional successful factors
The project provides enterprises with a new self-evaluation model, which serves the purpose to support sustainable decisions. Focal point and innovation are: more active participation of the employees and better consideration of regional economic factors for success.
EMA - Environmental Management Accounting - Pilot-testing
Training kit for environmental management accounting and investment appraisal
Multi-Activ-Facade
Multi-Activ-Facade is a pre-manufactured, multifunctional panellised façade, which incorporates ventilation with heat recovery, passive house windows and photovoltaic for smart self-supply within retrofitting measures. The specific challenge is the application within social housing.
Evaluation of the planning and building processes of multi-storey wooden construction residential and office buildings, and the development of measures to optimise these processes.
An analysis of the building and planning processes of multi-storey wooden construction residential and office buildings, taking into consideration the opinions of the professionals involved (planners, building contractors, building executives), then the development, documentation and distribution of ways to optimise these processes, using "Info-Tool" software.
SüdSan - Socially acceptable, climate-compatible refurbishment of two multi-family-houses as a model for the refurbishment of the Südtiroler-Siedlung Bludenz
Planning, energetic-economic optimisation, construction and monitoring of the costs, comfort and energetic performance of two socially acceptable and climate-target-compatible refurbished smaller apartment buildings in the Südtiroler-Siedlung Bludenz.
Safety and Authorization of Biomass Gasification Plants
Biomass gasification is a success promising technology for the combined heat and power production based on the utilization of domestic biomass. With this project a safety and commissioning guideline for the technology was created for the enhancement of the technology's market introduction.
Using buildings as energy storage - Monitoring project: Detached house H and detached house F Energy source wind power – Energy source solar power
Monitoring and comparison of performance of thermally activated building components in two similarly built, inhabited detached houses with different energy sources (wind and solar power). The functionality of energy supply through wind power or solar energy will be investigated as well as the verification of the practicability of self-regulating system control due to building temperature behaviour. The results provide an insight into the calculation assumptions, system control and feasibility of the smart grid technology.
Poly2Facade - Innovative thermal self-regulating solar facades by means of functional polymers
The overall objective of the present project is to develop and implement an optimal overheating protection system based on polymeric materials. The aim is to reduce maximum room temperatures in buildings caused by facade integrated solar-thermal collectors in stagnation.
Factors which hinder and support the market introduction of innovative residential building concepts - an information offensive for planners and technology producers.
In order to actively increase the diffusion of innovative residential buildings, the results of currently available research were summarised to produce a "'diffusion campaign", directed at building planners, residential building contractors and selected technology producers.
PVReValue – Holistic recycling of photovoltaic modules
The PVReValue research project is pursuing a new approach to the holistic recycling of photovoltaic modules, based on an innovative multi-stage composite separation process that is being developed in the course of the project. The multi-stage separation process and the novel combination of modern treatment processes are expected to achieve a recycling rate of more than 95 wt.-%.
Ecobuilding - Building Optimisation with Total Quality (TQ) Assessment
The construction, use, and disposal of buildings cause expenses, material flows, energy consumption, and emissions. With intelligent design, construction, management, and marketing, it is possible to reduce environmental burdens and costs, improve building quality, and increase building value.
HOTSPOTS - Holistic thermographic screening of urban physical objects at transient scales
HOTSPOTS enables new insights and perspectives for city development. According to the project idea innovations in acquisition and sensing as well as densification of geo-referenced city related data are supplemented by novel processing chains in city data analytics. Driven by an integrated scientific approach we develop a novel method in the selection, evaluation and prioritization of infrastructural city development measures which is directly derived from sensed data hence reducing the risk of ad-hoc decisions or lack in impact.
SynENERGY - Energy optimised settlement development by making use of synergies of energy efficiency, spatial planning and building culture
SynENERGY aims at an innovative, holistic approach to urban district optimization. The project targets a comprehensive analysis of the framework and urban development concept which includes not only optimisation of sustainable energy supply and use but also increased material flows (construction and disposal) at urban district level.
Mission Innovation Austria Online Event: Energy Communities - Findings from Innovation Programs and Pilots
23. April 2020
Online
The aim of the half-day webinar was to provide insights into energy communities and their opportunities and challenges arising from current market and regulatory regimes. More than 300 participants from 28 countries took part in the webinar.
Energy R&D 2023: Public Expenditures in Austria
Public spending on energy research totalled 310.8 million euros in 2023. The figure for 2021, by far the highest ever recorded in Austria, was therefore exceeded.
Schriftenreihe
16/2024
A. Indinger, F. Bettin, M. Rollings
Herausgeber: BMK
Deutsch, 150 Seiten
Downloads zur Publikation
BIMaterial Process Design for Material Building Pass
Building Information Modelling supported compilation of a Material Building Pass; as a qualitative and quantitative documentation of the material composition of, and the material distribution within, a building structure. This project is a central milestone towards standardized, BIM-generated building material passes.