Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA SHC Task 48: Quality Assurance and Support Measures for Solar Cooling
The completed IEA SHC Task 48 focused on an enhanced quality improvement and market-support measures for the technology option ‘solar thermal cooling or air-conditioning'. In cooperation with a total of 22 organizations (12 research institutes, 5 universities and 5 companies) from eight countries numerous useful reports and tools have been created to improve the quality of solar cooling systems with significant contribution of the Austrian partners.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
In the project cost and energy-efficient and non-fossil solutions for cooling and ensuring summer suitability are systematically analyzed and further developed. As part of the international R&D co-operation, fragmented knowledge is bundled and made available to the Austrian construction and mechanical engineering industry. Austrian expertise in climate-sensitive building optimization is disseminated internationally through leading participation in this international research.
IEA EBC Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings
IEA EBC Annex 89 focuses on the pathways and actions needed by various stakeholders and decision-makers to implement whole life cycle based net-zero greenhouse gas (GHG) emissions from buildings in policy and practice. Annex 89 will support key stakeholders and decision-makers in developing and implementing effective Paris-goal compatible schemes and solutions to achieve NetZ-WLC buildings at multiple scales.
IEA EBC Annex 86: Energy Efficient Indoor Air Quality Management in Residential Buildings
Residential buildings should be able to provide good indoor air quality while ensuring high comfort and low energy use at lowest possible cost. This project will develop methods and compile data to evaluate different indoor air quality management strategies. Furthermore, innovative control strategies will be evaluated and tested in order to develop concrete recommendations for possible implementations of innovative ventilation systems for residential buildings.
IEA EBC Annex 91: Open BIM for Energy Efficient Buildings
Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.
Potential for Solar Heat in Industrial Processes (Claudia Vannoni/Riccardo Battisti/Serena Drigo 2008)
![](/includes/images/pdf-placeholder.png)
The goal of this report, developed in the framework of the IEA Solar Heating and Cooling Programme Task33 and IEA SolarPACES Programme Task IV - Solar Heat for Industrial Processes (SHIP), is to highlightthe potential use of solar thermal (ST) plants to provide heat for industrial applications. In order to fulfil thisaim, several national potential studies were surveyed and compared with a focus on the key results and themethodologies applied.
Englisch
IEA HPT Task 41: Cold Climate Heat Pumps
The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.
IEA HEV Task 45: Electrified roads (E-roads)
Electric vehicles can be charged stationary as well as dynamically while driving on so-called "e-roads". From a systemic point of view, this technology can be an addition to stationary charging and is not competing. Internationally, the academic and political discussion in this field is progressing rapidly. Task 45 aims for a mutual knowledge exchange, a joint understanding of next steps and a contribution of the Austrian position into the international debate.
IEA HEV Task 46: LCA of Electric Trucks, Buses, Two-Wheelers and other Vehicles (Working period 2022 - 2025)
The objective of this R&D service is the participation in Task 46 of the IEA Hybrid and Electric Vehicle (HEV) TCP with the work on the internationally agreed topics and the managing of the task as Operating Agent. Beside the Life Cycle Assessment (LCA) studies of typical examples also methods for the assessment of climate neutrality and circularity are developed. This is done in dedicated expert workshops.
IEA SHC Task 69: Solar Hot Water for 2030
Solar water heating will play a crucial role in the decarbonization of the energy system for 2030 and beyond. IEA SHC Task 69 focuses on two technologies which are likely to play the biggest role in the global solar hot water market: thermosyphon and photovoltaic (PV) hot water systems. For these technologies global market surveys, systems and component optimizations, cost reduction analyses and revision of standards are being conducted to accelerate growth in target markets.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.
Digital Twin of a Dynamic Hardware Emulator: Challenges and Opportunities
6. December 2022
Online, AT
To meet the new challenges and maintain the reliability of the electrical grid with increasing share of static generation, innovative solutions are required. This lecture will present digital twin development challenges and opportunities of a dynamic hardware emulator that can be used for controller hardware in the loop (CHIL) testing.
International Sustainable Energy Conference – ISEC 2022
5. – 7. April 2022
Congress Graz, Austria and Online
ISEC 2022 is a forum for research, business and energy policy. The conference focuses on Renewable Heating and Cooling in Integrated Urban and Industrial Energy Systems.
BIPV as Architectural Tool
15. June 2018
TU Wien, Getreidemarkt 9, 1060 Wien, AT
Within the international meeting of the IEA PVPS Task 15 "Enabling Framework for the Acceleration of Building integrated Photovoltaics (BIPV)", a workshop on "BIPV as Architectural Tool" is organized providing the opportunity to meet local PV-Architects and BIPV stakeholders.
IEA HPP Annex 47: Heat Pumps in District Heating and Cooling Systems
A significant use of alternative heat sources with the help of district heating and cooling networks is a major challenge for a sustainable energy supply. In times of increasing shares of fluctuating producers such as PV and wind energy, the relevance of heat pumps increases. Within the framework of the IEA HPT Annex 47, potentials and barriers for the integration of heat pumps in DHC networks were analyzed.
IEA-SHC Task 66: SOLAR ENERGY BUILDINGS - Integrated solar energy supply concepts for climate-neutral buildings and communities for the "City of the Future”
The energy supply for climate-neutral buildings is based on holistic system concepts that achieve high renewable fractions by intelligently combining technologies, sector coupling, high grid interaction and flexibilization measures. The Solar Energy Buildings Task supports exactly this development. The objective is to identify relevant stakeholders and their needs, to develop a technology portfolio and optimised integrated energy concepts and to give recommendations to policy makers and energy-related companies.
IEA DHC TS5 - Integration of Renewable Energy Sources into existing District Heating and Cooling Systems (RES DHC)
The expansion of sustainable district heating/cooling is an essential part of the Austrian heat transition. The transformation of these supply systems to fully renewable systems requires the combination of a multitude of aspects. The aim of the project is to compile a data and knowledge base from international projects in this context. Expertise and process know-how for the process of implementing the transformation of district heating and cooling systems will be collected and processed.
IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation
The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.
IEA DHC Annex XIII Project 07: CASCADE - A comprehensive toolbox for integrating low-temperature sub-networks in existing district heating networks
The majority of urban district heating networks operate at high temperatures, which are a barrier to the efficient integration of heat sources such as solar, geothermal, ambient or low temperature waste heat. CASCADE is investigating the integration of low-temperature networks into the return pipe of existing district heating networks, which will reduce return temperatures and thus improve efficiency and increase its capacity to connect new customers.