Search results
There are 927 results.
Reduction of cooling requirements through optimized urban structures and processes and design optimisation in building design (smartKB*)
Based on a systematic listing of appropriate methods, recommended actions have been developed to reduce the cooling requirements in new or renovated buildings on three levels: a) optimization and use of appropriate urban structures, b) design strategies and passive measures for building concepts, c) reduction of cooling requirements through integrated planning processes.
Reduction of maintenance costs of ventilation systems in plus energy buildings
Maintenance costs for central air ventilation systems are approximately 0,42 Euro/m².a excluding VAT, for decentralized systems 1,16 Euro/m².a excluding VAT. 50% savings in operating costs of apartment passive houses opposed to apartment low-energy buildings [SCH11] can be achieved with maintenance costs of around 0,42 Euro/m².a.
Refrigerating plants in hotel and catering industry
To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.
Refurbishment of a housing complex to passive-house standard, Graz - Dieselweg
Refurbishment of the former "Puch-Siedlung", built as a housing area for employees of the company "Puch", in Graz Liebenau, in the period from the 1950s to 1970s, as an exemplary model for a refurbishment in "passive house standard" with special thoughtfulness to the tenants. "From domestic fuel to solar self sufficiency"
Refurbishment of an existing villa of the "Gründerzeit" to passive house standard with passive and active solar use
The project shows in an exemplary way how buildings of the time of "Gründerzeit" could be maintained and could offer a better environmental balance including the view of the village and the traffic than a new building. As an example a villa has been converted into a multi-family house within a larger housing project.
Regional acceptance of biogas power plants - suitability and availability of energy-plants
Development of an calculation tool for future biogas power plant operators and planners to check the regional acceptance of their power plants as well as possible energy-plants and their availability.
Renew Building - Competence Building and Knowledge Transfer for Climate-friendly renovation with ecological and renewable materials
The project Renew Building provided knowledge about eco-friendly renovation to the target groups (planners, architects, students of architecture, etc.) through theory and practice classes, lectures, an e-learning platform, and in an online knowledge database.
Renewable Biopolymers as Substitution for Bulk Plastics
Biopolymers consist of renewable resources. The concept deals with the development and implementation of technologies in the sector of renewable biodegradable materials.
Renewable energy in Austria: Modelling possible development trends until 2020
The project investigates possible economic, social and environmental effects of a sustainable energy policy. Within a participatory modelling process a sustainability model is used to simulate different energy scenarios (with a focus on renewable energy technologies) for Austria until 2020.
Renovation of the "Gründerzeit" building Eberlgasse in passive house standard
Based on the latest available technical capabilities, the renovation of Eberlgasse 3 will show that passive house standard is achievable even in a typical 19th century building.
Renovation with passive house technology by master-builder – verified planning documentation – Guide and seminars
The project aims at an increased implementation of passive house technology by the planning as well as the operating master-builder.
Repa & Service Mobil
Development/preparation of a mobile repair and service-point and pilot-implementation at large company sites or centres with high customer-frequency. Supporting of sustainable product-services - especially repair-services - in connection with efficient logistical and organisational processes in relation to product-service-systems; reduction of market-barriers and sensitisation of the general public for sustainable consumption.
RepaMobil - Reduction of market barriers for product-service-systems, especially repair- and other household services by setting up central service points at big company sites where a lot of potential customers pass by
Feasibility study / implementation concept for central repair- and service points (mobile or stationary) for repair- and other household services located directly at big company sites; raising the demand for sustainable services by private households.
Repair & Do-It-Yourself Urbanism (R&DIY-U)
The project follows the aim to analyze and to strengthen the transformative potential of Repair & Do-It-Yourself Urbanism with regard to a fundamental change of the existing poor sustainable handling of commodities in selected urban districts, their infrastructures and dominant business and private household practices into resilient areas.
Repair initiatives in Europe: innovations, business models, recommendations. Experiences from the PREPARE network
The European Union and many countries in Europe have begun to take individual measures to-wards “increasing the repair rate” here and there. With the help of surveys and interviews, which were carried out with the support of contacts provided by the “PREPARE” network, which has ex-isted for almost 30 years, this work collects information about such measures in other European countries - especially regarding “best practice examples” and “lessons learned” – and analyzes their transferability to Austria.
Reprocessing of used goods - A strategy of sustainability and ist impact on the supply chain of a "factory of tomorrow"
Objective is to improve the competitiveness of reprocessing-activities as strategies towards higher resource productivity.The study will analyse the changes of the supply chain necessary to achieve this beyond the Point of Sale with regard to the re-integration of used goods in the supply chain.
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.
Revolutionary, cost efficient bitumen rooftop membrane with integrated photovoltaic modules
The project goal is to adapt the photovoltaic (PV) modules of crystalsol and an appropriately designed production process in order to integrate the flexible photoactive layer cost-effectively into waterproof roof membranes. At the end of the project the first membranes with integrated PV-layers will be produced. The success of this project would lead to enormous cost cutting and technological development advantages in the BIPV technology.
Road-to-Road/ Verschränkung neuartiger Methoden zur effizienten „Road-to-Road“ Inwertsetzung von Altasphalt
The planned combination of experimental and model-based methods for assessing/describing the behavior of asphalt shall enable the goal-oriented optimization of the performance/durability of recycled asphalt, with the resulting positive effects (CO2 balance, transport distances, landfill volume) being quantified within the project.
S - House
Innovative Use of Renewable Resources demonstrated by means of an Office and Exhibition Building