IEA Tasks & Annexe
There are 135 results.
IEA ISGAN Annex 3: Benefit/Cost Analyses and Tools of Smart Grids
Together with experts from 11 countries, the EI-JKU has analysed cost-benefit models and developed proposals for their adaptation and further development. In the course of the work, the EI-JKU dealt in particular with two questions: how such an evaluation model can be adapted to Austrian conditions and which socio-economic factors influence the question of whether an end consumer emerges as a winner or loser from Smart Grid-based functionalities.
IEA Bioenergy Task 39: Commercialising Conventional and Advanced Transport Biofuels from Biomass and Other Renewable Feedstocks (Working Period 2019 - 2021)
IEA Bioenergy Task 39 deals with the commercialization of conventional and advanced biofuels, including innovative raw materials, their economic, environmental and social assessment and the investigation of relevant policies. The Triennium 2019-2021 made findings from countries with a committed biofuels policy accessible to Austria, and success stories of Austrian industry, research and policy were promoted internationally.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
In the project cost and energy-efficient and non-fossil solutions for cooling and ensuring summer suitability are systematically analyzed and further developed. As part of the international R&D co-operation, fragmented knowledge is bundled and made available to the Austrian construction and mechanical engineering industry. Austrian expertise in climate-sensitive building optimization is disseminated internationally through leading participation in this international research.
IEA SHC Task 62: Solar Energy in Industrial Water and Wastewater Management
The main objective of IEA SHC Task 62 was to increase the use of solar thermal energy in industry, to develop new collector technologies and to open up industrial and municipal water treatment as a new area of application with high market potential for solar thermal energy. The focus was on thermal separation technologies as well as technologies for solar water decontamination and disinfection. By combining the technologies with solar collectors, an innovative and economically attractive overall solution should be created for integration into industry.
IEA 4E TCP-PECTA: Power Electronic Conversion Technology (Working period 2019 - 2021)
The IEA 4E Power Electronic Conversion Technology Annex (PECTA) aims to evaluate the efficiency potential related to the integration of Wide Bandgap (WBG) based power semiconductors for relevant applications and to act as an independent knowledge platform. In the first work period, energy savings have been initially assessed for selected applications, a roadmap for WBG materials was derived and the work plan for PECTA's Phase 2 was defined.
IEA Bioenergy Task 33: Gasification of Biomass and Waste (Working Period 2019 - 2021)
The main aim of IEA Bioenergy Task 33 is the international as well as national information exchange and networking on thermochemical gasification of biomass and waste. The focus is on exchange of information regarding R&D programmes in area of biomass and waste materials gasification, commercial facilities and the marketing chance for gasification facilities to identify and avoid technical and non-technical hurdles.
IEA HPT Task 42: Heat pumps in smart energy grids for sustainable cities
The aim of Annex 42 is to analyse the technical possibilities as well as the economic/regulatory framework conditions of heat pumps for load balancing in smart grids, which are largely controlled by electricity supplier, and to investigate the impact on thermal consumers and possible potentials, in order to work out economic incentive models for load shifting and the benefits for energy supply companies and end customers on this basis.
IEA SHC Task 52: Solar Thermal & Energy Economics in Urban Environments
IEA SHC Task 52 focused on the analysis of the future role of solar thermal heat in integrated urban energy systems. The potential of solar thermal applications to cover the low-temperature heat demand in future low-carbon energy systems was investigated against the background of the rapidly changing framework conditions in the energy sector. Best practice examples for the integration of solar thermal systems into urban energy systems were evaluated and documented.
IEA EBC Annex 64: Optimised Performance of Energy Supply Systems with Exergy Principles (Working period 2014-2018)
To reduce CO2 emissions in cities, an overall understanding of energy conversion processes is necessary, which also takes temperature levels into account. This is particularly important when alternative heat sources such as waste heat, ambient heat, solar and geothermal energy are to be used, as these often have a low temperature level, i.e. a low exergy content. Accordingly, urban energy systems are analysed and optimised within the framework of the IEA EBC Annex 64 with the help of the exergy approach.
IEA Bioenergy Task 42: Biorefining in a Circular Economy (Working Period 2019-2021)
Biorefineries can provide a wide range of products such as energy, fuels, chemicals, food, feed and materials based on renewable resources. In this project, relevant information on biorefineries regarding technologies and biobased products will be compiled at international expert level and results on an ecological and economic assessment of selected biorefineries will be provided.
IEA Bioenergy Task 37: Energy from Biogas (Working Period 2019 - 2021)
Aim of Task 37 is to accelerate development and progress of biogas technology in the member countries. During the working period 2019-2021 the focus lies on the ecologically and economically sound implementation of biogas technology in agricultural and industrial processes.
IEA Wind Task 19: Wind Energy in Cold Climates (working period 2019 - 2021)
The project deals with the challenges of wind power utilisation in icing conditions and provides a strong opportunity to generate new knowledge by global networking. Energiewerkstatt leads a subtask in the field of icefall risk and works on deriving rules of thumb for the risk assessment of the ice throw risk of turbines in operation during icing conditions.
IEA Wind Task 32: Wind LiDAR Systems für Wind Energy Deployment (Working period 2019-2021)
IEA Wind Task 32 (since 2022: Task 52) deals with the challenges of using Wind-LiDAR-Systems and provides a strong opportunity to generate new knowledge by global networking. Energiewerkstatt elaborated in this phase of Task 32 an analysis regarding data availabilities of LiDAR measurement campaigns at different sites in Austria and resumed an organisational role regarding the assessment of uncertainties of LiDAR measurements in complex terrain.
IEA-4E Annex Electric Motor Systems (EMSA). (Working period 2014-2017)
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. Currently, Austria leads the task Energy Audits for Motor Systems to develop recommendations for carrying out energy audits for motor systems based on international standards.
IEA SHC Task 51: Solar Energy in Urban Planning
The focus of IEA SHC Task 51 ‚Solar Energy in Urban Planning’ has been placed on the topic of solar energy integration in urban environment. Hereby, different international examples, options and processes for planning and implementation of solar energy measures in cities throughout the world have been screened, outlined and equipped with recommendations for further development. The core outcomes of the project address different options and possibilities for optimization of planning processes, framework conditions, tools, methods and education aiming to attain more effective and timely understanding as well as integration of solar energy in urban context.
IEA DSM Task 25 – Business Models for a more effective market uptake of DSM energy services
This task aims at the identification and development of effective business models for energy services, which lead to a sustainable growth of energy efficiency services. Therefore the various national framework conditions and contexts have been analysed, that are necessary for a successful development of such business models. Examples for start-ups and entrepreneurs have been discussed, their challenges and deficits as well as success factors in terms of capabilities/skills identified and out of these findings a web based analysis tool been developed.
IEA EBC Annex 61 - Business and Technical Concepts for Deep Energy Retrofit of Public Buildings
Target of IEA EBC Annex 61 was the development of technical and economical concepts for Deep Energy Retrofit of public buildings. To force high-quality and energy efficient retrofit, besides the enhancement and dissemination of innovative, technical retrofit concepts, the focus was in the development of innovative business models (energy-contracting).
IEA DSM Task 24: Behaviour Change in DSM – Helping the Behaviour Changers (Working period 2015-2017)
More than 20% of the use of energy for small consumers can be saved by changed behaviours. Past efforts to tap these potentials through DSM-interventions are not effective. The Task 24 dealt with the most important actors groups as well as tools, which support the behaviour changers in their daily work. In addition, an assessment method for DSM-interventions in the frame of the Austrian law on energy efficiency was elaborated.
Clean Energy Education & Empowerment (C3E International Initiative)
The C3E TCP deals with strategies, policies and measures to increase the promotion of women in the energy sector. The aim is to create a framework in which participating countries can share information and best practices on effective strategies for the empowerment of women in this sector.
IEA EBC Annex 60: New generation computational tools for building and community energy systems based on the Modelica and Functional Mockup Interface standards
The objective was to develop and demonstrate next-generation computational tools that allow building and community energy grids to be designed and operated as integrated systems. The work conducted in Annex 60 has helped to share, further develop and deploy free open-source contributions of previously uncoordinated activities in modeling and simulation, based on the Modelica and Functional Mockup Interface standards.