Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
ZERMEG II - Zero emission retrofitting method for existing galvanising plants
ZERMEG II ist das Nachfolgeprojekt von ZERMEG, das im Rahmen der ersten Ausschreibung der Fabrik der Zukunft beauftragt wurde. In dem Projekt wurde eine Methodik entwickelt, mit der bestehende Galvanikanlagen so betrieben, umgebaut und erweitert werden können, dass sie sich unter möglichst weitgehender Reduktion des Wasser- und Chemikalieneinsatzes betreiben lassen.
ZERMEG - Zero Emission Retrofitting Of Existing Galvanizing Plants
Methodischer Ansatz zur rigorosen Optimierung von bestehenden Anlagen der Oberflächentechnik mit dem Ziel eines emissions- und abwasserfreien, sowie kostengünstigen Betriebes, Hintergrunddaten zur Optimierung und drei Fallstudien.
Entwicklung des ökoeffizienten Alternativbaustoffs "Mixolith" unter Verwendung von Reststoffen biogenen Ursprungs als Bindemittel
Entwicklung des Alternativbaustoffs "Mixolith" unter Ausnutzung der latent-hydraulischen Eigenschaften von Holzaschen aus Biomasse(heiz)kraftwerken. Nachweis des Abfall-Endes und der Produkteigenschaften im Straßen- und Dammbau. Mehrjährige Erfahrung durch Stützdammbau im eigenen Betrieb.
THECLA
De-lacquering as a service
Development of the service of de-lacquering in industrial plants on the basis of pulsed high pressure water with a new, energy efficient high pressure pump. Further possible applications will be searched for and evaluated.
Holzbearbeitung mit Überlagerung einer Ultraschall-Wechselbeanspruchung
Entwicklung von Verfahren zur Holzbearbeitung unterstützt durch hochfrequente Ultraschallvibration in Hinsicht auf Anwendungen in der holzverarbeitenden Industrie.
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.
Ecologically friendly resin impregnation of rotating machines with the use of the joule effect
Windings of rotating machines or electrical generators (e. g. wind and water power generators) are impregnated with resin. A new technology using the heating effect of current is investigated. The high efficiency of heating with the joule effect results in quick heating of stator leading to fast gelling of the resin, which implies low emission.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
Stoffliche Verwertung der textilen Restfraktion
Verwertung des im Zuge der Aussortierung von brauchbarer Second-hand Bekleidung aus gesammelter Altkleidung anfallende textile Abfall soll einer Wiederverwendung zugeführt werden; Entwicklung von automatisierten, mechanischen Verfahren zu Aufbereitung; Vermeidung von Abfall.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
Identification of services, wood and non-wood products in sustainable forest management
The ecological, economic and social effects of services, wood and non-wood products on sustainable forest management, the marketing potential and the relevance of sustainable measures are analysed.
PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement
Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.
Improvement of resource efficient use of wood
Modelling of wood processing in order to demonstrate the developments' impacts on performance
Investigation of the sustainable utilisation of carbon from methane pyrolysis
One of the possible alternative production routes for renewable hydrogen is methane pyrolysis. Compared to other, alternative production routes, methane pyrolysis has the lowest energy input (less than a quarter of water electrolysis) with a very high hydrogen yield.
Material utilization of end-of-term textiles
Mechanical processing of the non-reusable part of collected end-of-life apparels (e.g. cutting, sifting, etc.); development of marketable application for the obtained short fibers in the field of construction materials (e.g. bitumen modification)
Innovative technology for the treatment of municipal and industrial waste water and process waters (INNOWATEC)
Evaluation of a technology as a supporting module for process water and waste water treatment and testing in laboratory and pilot tests for specific fields of application in operational water management.