Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

IEA EBC Annex 72: Assessing life cycle related environmental impacts caused by buildings

The construction sector has great potential to reduce its energy consumption and the associated environmental impacts. The IEA EBC Annex 72 therefore focuses on the harmonization of methods for the assessment of construction-specific and operational environmental impacts (primary energy requirements, greenhouse gas emissions and other indicators) throughout the life cycle of buildings.

IEA EBC Annex 61 - Business and Technical Concepts for Deep Energy Retrofit of Public Buildings

Target of IEA EBC Annex 61 was the development of technical and economical concepts for Deep Energy Retrofit of public buildings. To force high-quality and energy efficient retrofit, besides the enhancement and dissemination of innovative, technical retrofit concepts, the focus was in the development of innovative business models (energy-contracting).

IEA EBC Annex 67: Energy Flexible Buildings (working period 2015 - 2019)

The project increased the knowledge on building Energy Flexibility and the regarding potential buildings can provide to energy grids. The critical aspects and possible solutions to utilize the Energy Flexibility that buildings can provide were identified and a report of the “Principles of Energy Flexible Buildings” will be published in 2019.

IEA HEV TCP Task 40: Critical Raw Materials for Electric Vehicles

The production of electric vehicles and batteries requires critical raw materials. In Task 40, demand and supply are compared, based on global scenarios of the development of electric vehicle fleets, battery technologies, primary and secondary raw material potentials and recycling technologies. Potential overall ecological and social impacts of raw material and battery production are assessed.

IEA HEV TCP Task 49: Electric Vehicle-Fire Safety

As the number of electric vehicles increases, so does the need for safety. The project is creating an overview of fire safety standards for electric vehicles and networking relevant stakeholders. Challenges are discussed and experiences exchanged in national and international expert workshops. The focus is on promoting the safety of electric vehicles and increasing their acceptance.

BIM4BEMS - Building Information Modeling for Building Energy Management Systems

BIM4BEMS explores use cases that represent the usage of building information models (BIM) in combination with building energy management systems (BEMS) during operation. This enables the interaction between BIM and building management systems (BMS) which improves the analysis and visualization of inefficiencies in facilities.

Webinar: Future weather data and heatwaves

31. May 2022
Online, AT

Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.

Resilient Cooling of Buildings - Case Studies and Policy Recommendation

20. October 2022
Online

In this webinar EBC Annex 80 experts will present the key findings on resilient cooling policy actions, inlcuding examples from international standards and legislative as well as policy opportunities. Further you will receive an overview of the carried out field studies on resilient cooling and learn from two case studies from India and Belgium.

3rd IEA SHC Task 65 - Austrian National Workshop

8. April 2024
Hotel Europa, Graz, AT

This is the third of three workshops of the IEA SHC Task 65, which takes place at the national level. The purpose of these workshops is to bring together collected Austrian know-how into Task 65 and to reflect the findings of international experts, as well as to test the tools and methods developed.

European Networking Group Workshop: Harmonization and Standardization of Electric Road Systems - Roadside Infrastructure

27. - 28. March 2023
University of Applied Sciences Erfurt, Altonaer Straße 25, 99086 Erfurt, DE

This Workshop aims to initiate harmonization processes for standards and regulations with context to roadside equipment for Electric Road Systems (ERS). A consensus between the different existing ERS technologies should be found and new ways to unearth compatible solutions implementing ERS in Europe should be started.

Solar Heat Worldwide - Markets and Contribution to the Energy Supply 2005

The solar thermal collector capacity in operation worldwide equaled 107.8 GWth corresponding to 154 million square meters at the end of the year 2005. Of this, 90.7 GWth were accounted for by flat-plate and evacuated tube collectors and 16.2 GWth for unglazed plastic collectors. Air collector capacity was installed to an extent of 0.9 GWth. Englisch

IEA DHC Annex TS2 webinar: Decreasing district heating return temperatures - How to identify critical substations

04. December 2019
Webinar, AT

In this Webinar, we will present measures to decrease return temperatures in substations and methods to identify where to apply them in order to maximize the impact on the entire system. Results for the network at TU Darmstadt Campus Lichtwiese will be shown as an example.

Market survey of energy storage technologies in Austria (MSSP2020)

Stationary battery storage devices for the maximisation of the private consumption in PV-systems, large heat storage for local and district heating systems, thermal activation of buildings and the area of innovative storage systems have been chosen for the first market survey within this project. The historical market diffusion of these technologies is surveyed empirically and documented up to 2020.

Transferproject: Professional strawbale building - "Virtual building-site", exhibition and instruction material

Strawbale-workshops are considered as the best way to inseminate this ecological building-technique. The "virtual building site" has some decisive advantages over the common situation: it does not depend on the weather, allows the comparative study of different constructing methods and can, as a permanent installation, be used as an exhibition.

IEA EGRD Workshop: Technologies and innovations for the climate-neutral city

May 12–13, 2025
Vienna (Austria) and onlineDay 1: BMIMI, Radetzkystraße 2, 1030 Wien, Festsaal, Day 2: die HausWirtschaft, Bruno-Marek-Allee 5/1, 1020 Wien, NordbahnSaal

This workshop focused on how cities can achieve climate neutrality. The discussions centered on key factors for R&D policies to foster technologies and systemic innovations for sustainable and resilient urban development.

IEA Working Party on Fossil Fuels (WPFF)

The Working Party on Fossil Fuels (WPFF) is the advisory council for the IEA Committee on Energy Research and Technology (CERT) for the field of fossil fuels.

OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors

Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.

IEA HPT Annex 59: Heat Pumps for Drying Processes

Drying processes are highly energy-intensive and widespread in industry and commerce as well as in households in various forms. In this project, the potential for energy savings in drying processes in various applications will be investigated, which can be tapped through the use of heat pumps and made available to the relevant target groups in the form of guidelines, data, etc.

IEA Bioenergy Task 45: Climate and Sustainability Effects of Bioenergy within the Circular Bioeconomy (Working period 2025 - 2027)

Promoting sustainable bioenergy as part of the circular bioeconomy: Task 45 participation aims to improve understanding of the environmental, social, and economic impacts of bioenergy. The focus includes regional differences and the development of robust impact assessment methods to support decision-making by stakeholders such as communities, businesses, and governments.

IEA Hydrogen Task 45: Renewable Hydrogen Production

Due to the increasing pressure to replace fossil fuels with alternatives, the demand for renewable hydrogen supplies is also increasing. In this project, the state of the art of various established and innovative production paths will be collected, processed and then made available to the public.