Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
P2H-Pot - Potentials, economic feasibility and system solutions for Power-to-Heat
P2H-Pot has identified economically feasible potentials for Power-to-Heat (P2H) in urban regions. The suitability of different technical system configurations were investigated using thermodynamic simulation and considering experiences from Scandinavian cases. The assessment of short, medium and long term relevance and economic feasibility of P2H were accomplished by simulating model-based scenarios up to 2050 of the Austrian and German electricity and heat market. In cooperation with a district heating company three case studies have been carried out.
MuT - Monitoring of urban Technologies: Classification, Specification, Evaluation
In the frame of the project a classification system for Smart City Technologies had beed developed, the relevance of a wide range of technologies in terms of their potential contribution to the development of sustainable and more resilient cities with a high quality of life had beed evaluated and a comprehensive classification of the technical maturity of relevant technologies, technical (sub-)systems and technology-related services had been given.
Participation in TASK 25 of the Implementing Agreements on Solar Heating and Cooling of the International Energy Agency (IEA)
Participation in TASK 25 "Solar Assited Air Conditioning of Buildings". Description and Analys of the state of the art, development of a simulation tool, build up and measurement of demonstration plants.
Climate pioneer city Salzburg
The aim is to draw up a master plan to achieve climate neutrality for the city of Salzburg by 2040. Together with stakeholders, development and urban planning processes can be analyzed, targets set and the necessary resolutions obtained. The exchange with the other pioneering cities is intended to ensure the broadest possible exchange of knowledge and to exploit synergies.
Highlights of Energy Research 2018 - System Integration and Sector Coupling
March 20th, 2018, 9:00 - 16:30
TUtheSky, Getreidemarkt 9, Vienna
The 11th Highlights of Energy Research will focus on system integration and coupling of sectors. National and IEA research projects in the areas of energy systems and grids, industry, mobility and buildings and urban systems will be presented.
Wall systems made of renewable resources
Testing and optimising post and beam straw bale constructions Testing the thermal insulation (specific heat conductance) and fire resistance of a construction (combustibility grading period), optimisation of building junction elements, development of a mobile testing lab for efficient and effective quality management
scaleFLEX - Scalable method for optimizing the energy flexibility of districts
Development of a decentrally organized automation method for improving the demand-side flexibility options of buildings and districts. The utilized data-driven algorithm promise high scalability and therefore low installation and operating costs. The developed method will be validated using different building types (high-tech office buildings, low-tech office buildings, residential buildings).
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.
IEA SHC Task 42/ECES Annex 29: Compact Thermal Energy Storage - Material Development for System Integration
The key accomplishments of the task are summarized in the following points: New material characterizing methods were investigated, a new standard for an improved DSC measurement method has been developed, a data base for PCM, TCM and sorption materials was developed and established, advances in the numerical modelling of materials, compact thermal storage systems were developed for different material applications, a tool for the economic evaluation of thermal energy storages has been developed. Also numerous joint R&D Projects and more than twenty publications arose from the IEA-SHC Task 42 networking activity.
RAARA - Residential Area Augmented Reality Acoustics
Populations with high exposure to noise emissions will generally agree: Noise means trouble. The aim of project RAARA is to develop a simple, intuitive albeit accurate method for reducing noise imissions in urban areas. This method involves placing a noise-source into its planned real-world destination prior to actual installation, by means of augmented reality. The ensuing sound-imissions are then made tangible by means of sound effects and coloured visualizations. This exceptional approach will facilitate planning for heating and cooling devices and thus reduce noise pollution in urban areas. This, in turn, can contribute to an increase in societal acceptance and investment in renewable energy.
AC/DC Office Buildings - Implementation of Electricity Networks with Alternating and Direct Current in Office Buildings - Feasibility and Energy Efficiency Potentials
Based on a literature and technology review this projects aimed to document and demonstrate already available and reasonable concepts for the implementation of electricity networks with alternating and direct current in modern office buildings. Focus of the study was to assess the feasibility in general and the energy efficiency potential in particular but it also documents necessary technical equipment and expected advantages and disadvantages. Additionally, important research questions for energy supply, energy distribution and application of direct current technologies were formulated.
1000 passive houses in Austria - 2nd documentation period 2004 - 2005
2nd documentation period of the joint project of IG Passivhaus Österreich under the programme line "Building of tomorrow", an initiative of the Federal Ministry of Transport, Innovation and Technology (BMVIT) to set up a detailed network documentation on a representative cross-section of all passive houses in Austria.
Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps (WRGpot)
The objective of the project is to find possibilities for the reduction of heat demand for hot water preparation of low energy and passive house buildings, in order to advance a further step into the direction of plus-energy buildings.
Quantitative and qualitative identification of relevant secondary raw material flows in Austria
In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.
Sol2Pump - High efficient combination of solar thermal plants, photovoltaic and heat pumps
Targeting a high level of decentralised energy supply on basis of renewable energy, the project analysed the possible combinations of solar thermal energy, photovoltaic and heat pumps. The project aimed to maximise the domestic energy supply due to utilisation of the building as short term energy storage. In addition to that, several optimisation measures had been developed. The impact on the energy supply and demand will be economically assessed through life cycle costing. On this basis, the potential load transfer and the use of this kind of systems had been evaluated in combination with smart grids.
Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs
What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.
ISEC 2024 - International Sustainable Energy Conference
10. – 11. April 2024
Messecongress Graz, Austria
The focus of ISEC 2024 will be on how we can achieve energy sovereignty within a time horizon dictated by climate change and defined by politics.
RISKMIN - Risk minimization along the value-added chain of plants to the colouring pigments
RISKMIN is a project for the mitigation of risks along the supply chain of plant raw material to the provision of plant dyestuff. Considering the measures concerning risk mitigation, a business plan for a plant dyestuff manufacturer for the effective realization of the business idea was created.
WHISCERS. Whole House In-Situ Carbon & Emission Reduction Solution
Whiscers is a system for installing internal wall insulation with minimal mess, whilst the resident remains in the property. It involves measuring the walls in the property using a laser device that enables fast and highly accurate measurement. Information is then sent electronically to a computer controlled off-site cutting machine that is rapid, precise and mess-free.
MODESTORE - Modular High Energy Density Sorption Heat Storage
Seasonal storage of solar heat for use in low energy and passive houses (new buildings as well as old buildings).