Suchergebnisse
Design of pumped storage schemes
Development of a new surge tank system for pumped storage schemes (PSS) for the governing of the changing requirements in electricity networks due to integration of renewable, volatile energy sources.
Photovoltaic Roadmap for Austria
Development of a Photovoltaic Roadmap for Austria - a study with the intention to screen the opportunities, economical potential as well as the barriers of the promising technology Photovoltaics as basis for strategic decisions in energy relevant policies.
IEA PVPS Task 1: Strategic PV Analysis & Outreach (Working period until 2022)
This task, which is mandatory for all countries participating in the IEA-PVPS program, has been producing global reports on photovoltaic development since 1993. In addition, content-related priorities are set, or new topics and tasks are developed, which are then sent to the ExCo for decision-making. This gives Task 1 strategic importance for the overall IEA PVPS program.
IEA HPT Annex 50: Heat Pumps in Multi-Family Buildings for Space Heating and DHW
The project aims at demonstrating the potentials of heat pump technology for the energy supply of multi-family houses (MFH) and to contribute to the elimination of existing market barriers. Concepts and innovative technology options for heat pumps in MFH will be investigated in detail by means of simulations and experiments. The findings and results will be presented in international expert meetings and disseminated among national heat pump manufacturers, installers and planners.
IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings
In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.
IEA EBC Annex 64: Optimised Performance of Energy Supply Systems with Exergy Principles (Working period 2014-2018)
To reduce CO2 emissions in cities, an overall understanding of energy conversion processes is necessary, which also takes temperature levels into account. This is particularly important when alternative heat sources such as waste heat, ambient heat, solar and geothermal energy are to be used, as these often have a low temperature level, i.e. a low exergy content. Accordingly, urban energy systems are analysed and optimised within the framework of the IEA EBC Annex 64 with the help of the exergy approach.
IEA HPT Task 42: Heat pumps in smart energy grids for sustainable cities
The aim of Annex 42 is to analyse the technical possibilities as well as the economic/regulatory framework conditions of heat pumps for load balancing in smart grids, which are largely controlled by electricity supplier, and to investigate the impact on thermal consumers and possible potentials, in order to work out economic incentive models for load shifting and the benefits for energy supply companies and end customers on this basis.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
In the project cost and energy-efficient and non-fossil solutions for cooling and ensuring summer suitability are systematically analyzed and further developed. As part of the international R&D co-operation, fragmented knowledge is bundled and made available to the Austrian construction and mechanical engineering industry. Austrian expertise in climate-sensitive building optimization is disseminated internationally through leading participation in this international research.
BBI JU Stakeholder Forum 2019
4. December 2019
Egg Congress and Meeting Center Brussels, Belgium
The BBI JU Stakeholder Forum 2019 will bring together the bio-based industries community and facilitate open discussion on the impact, achievements and strategic direction of the Bio-based Industries Joint Undertaking (BBI JU) programme, as well as the latest developments in the bio-based industries sector.
IEA EBC Annex 63: Implementation of Energy Strategies in Communities
As part of the "Annex 63" project, Austria has worked with 10 other countries to develop guidelines for the successful implementation of energy strategies at local level. The results include support for nine strategic measures, descriptions of case studies, support materials and recommendations for different target groups.
IEA EBC Annex 79: Occupant-Centric Building Design and Operation
The IEA EBC Annex 79 aims to provide new insights into comfort-related occupant behaviour in buildings and its impact on building energy performance as well as occupant-centric building design and operation.
IEA HPT Annex 49: Design and integration of heat pumps for nZEB
A dominating concept to reach a nearly Zero Energy Building (nZEB) is the combination of solar PV systems and heat pumps. The extended scope of the Annex 49 regards the balance of single buildings and groups of buildings/neighbourhoods, a thorough investigation of heat pump integration options for nZEBs and nZE neighbourhoods by means of monitoring and simulation as well as the design and control optimization for heat pumps in nZEB and the integration into energy systems.
IEA HPT Annex 48: Industrial Heat Pumps, Second Phase
Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.
User-Centred Energy Systems - Webinar: Introducing the Global Observatory on Peer-to-Peer, Community Self-Consumption and Transactive Energy Models (GO-P2P)
18. November 2020, 3.00 pm CET (Bruxelles, Vienna)
Online
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA HPT Annex 43: Fuel Driven Sorption Heat Pumps
The project aimed at investigating the performance and market potential of gas-fired absorption heat pumps (AHPs) in domestic and small commercial or industrial buildings or applications. Selected processes were simulated for various types of buildings in order to calculate the energetic, ecological and economical potential of this technology. The results were compared with monitoring data of a gas-fired AHP system. In addition, a market survey including market barriers for gas-fired AHPs in Austria was conducted and a list of market supporting measures was compiled.
IEA HPT Annex 55: Comfort and Climate Box – Speeding up market development for integrating heat pumps and storage packages
In the IEA HPT Annex 55, heat pumps with integrated thermal/electrical storage systems for existing buildings that are as close to the market as possible were developed. Furthermore, measures to accelerate market development have been worked out.
IEA HPT Annex 54: Heat pump systems with low GWP refrigerants
The aim of the project was to investigate the current situation in the area of refrigerants with a low global warming potential ("low-GWP"). The focus of the national project lies on the current refrigerant application situation and on an outlook until 2030 on the availability of components and systems.
IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2019 - 2022)
The overall objective of the project is the advancement of fuel cells in transportation applications. To ensure a comprehensive penetration of the automotive market, the focus will be laid on the cost-reduction potential of fuel cell components and systems including hydrogen storage, the hydrogen infrastructure and fuel cell vehicles in public transportation as well as fuel cell powered utility vehicles.
IEA HPT Task 41: Cold Climate Heat Pumps
The aim was to increase the efficiency of outdoor air heat pumps in cold climates in locations with low outside temperatures of up to -25°C. Newly developed heat exchanger concepts were tested and optimized regarding their icing behaviour. Different circuit modifications were modelled and simulation studies for low ambient temperatures were carried out.