Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"

Internationale Energieagentur (IEA)

IEA EBC Annex 70: Building Energy Epidemiology: Analysis of Real Building Energy Use at Scale

Within the framework of the IEA-EBC Annex 70, causes of deviations between calculated and actual energy consumption in buildings were empirically investigated and requirements for data quality, characteristics and security were developed. Furthermore, recommendations were developed regarding the use of internationally uniform standards and methods for data collection, processing and evaluation.

Internationale Energieagentur (IEA)

IEA SHC Task 59/EBC Annex 76: Deep Renovation of Historic Buildings - Towards lowest possible energy demand and CO2 emission (nZEB)

The goal of Task 59 was to document international best practice examples (knowledge base), develop a multidisciplinary planning process, and develop holistic retrofit solutions for historic buildings. As a knowledge base, the Historic Building Retrofit Atlas (www.HiBERatlas.com) emerged from the project. In the HiBERatlas more than 55 best practice examples are documented. In addition to the management of Subtask A (Knowledge Base) and Subtask C (Conservation compatible retrofit solutions & strategies), innovative technical and organizational retrofit solutions, which have already been applied in national demonstration projects and tested in practice, have been incorporated and further developed through the Austrian participation.

Internationale Energieagentur (IEA)

IEA-DHC Annex TS2: Implementation of Low Temperature District Heating Systems

The potential of alternative heat sources is highest at low system temperatures, but current district heating networks are usually high-temperature systems. The aim of the IEA DHC Annex TS2 is to support the transformation of district heating networks towards lower temperatures (the so-called 4th generation). For this purpose, Annex TS2 forms an international platform that enables an exchange on the topics of technology, system, demonstration and competitiveness.

Internationale Energieagentur (IEA)

IEA EBC Annex 75: Cost-effective Building Renovation at District Level Combining Energy Efficiency & Renewables

For the conversion of existing buildings into low(st) energy buildings with low greenhouse gas emissions, it is important to know which strategies are most cost-effective to reduce emissions and primary energy consumption of the buildings. In particular, it is important to find the right balance between energy efficiency measures and renewable energy measures. This question is addressed in this project.

Internationale Energieagentur (IEA)

IEA HPT Annex 63: Impact of heat pump placement on noise emissions

Noise emissions from heat pumps are a potential barrier for broad market diffusion of this energy efficiency technology, especially in urban areas. In this project, the influences of noise emissions in the building and in the neighbourhood are characterised, their psychoacoustic effects are analysed in more detail, and tools for digitally supporting heat pump placement are further developed. The results will be presented to relevant target groups in the form of guidelines and other documentation.

Internationale Energieagentur (IEA)

Co-Operative Programme on Advanced Materials for Transportation Applications (AMT)

The AMT Technology Programme (AMT-TCP) focuses on creating innovations in material technologies to increase energy efficiency and reduce carbon emissions to allow global warming mitigation.

Internationale Energieagentur (IEA)

IEA ES Annex 49: Low Exergy Systems for High-Performance Buildings and Communities

The objective of Annex 49 is the development of approaches for reducing the exergy demand of buildings, so as to reduce the CO2 emissions of the building stock and support structures for sustainable and reliable energy systems in the building sector. To achieve the objectives of Annex 49, the following activities have been carried out:Application of exergy analysis and providing tools, guidelines, best-practice examples and background information for planners and decision makers in the fields of construction, energy and politics Support of cost-efficient low-energy/exergy measures for renovation and new building taking into account both the residential and the service sector Promotion of exergy-related performance analysis of buildings, particularly from the perspectives of communities / regions

Internationale Energieagentur (IEA)

IEA AMT Task 12: Novel 2D materials and laser-based surface processes to increase resource efficiency in mobility applications

Friction and wear cause enormous global costs and CO2 emissions. At the same time, machines should become more and more reliable. Within Task 12, new concepts in material development and surface processes are being examined and advanced in order to reduce friction and wear.

Internationale Energieagentur (IEA)

IEA ES Annex 50: Prefab Systems for Low Energy/High Comfort Building Renewal

Development of integrated concepts for multi-storey buildings, which enable renovations of buildings with high energy efficiency at good user acceptance during the realisation phase as well as afterwards (comfort, affordability). Relevant components: integrated solutions of roof and façade with high rate of pre-fabrication, the possibility of integrating the energy façade/roofs and energy distribution and supply.

Internationale Energieagentur (IEA)

IEA EBC Annex 83 - Positive Energy Districts

A positive energy district (PED) is an urban area/neighbourhood that is able to generate more energy than it consumes and is agile/flexible enough to respond to energy market fluctuations. This is where the IEA-Annex 83 and commissioned leading Austrian research institutions come in to collect, systematise, synthesise and process the knowledge and experience of the international scientific community on PEDs in a form that is understandable for practitioners.

Internationale Energieagentur (IEA)

IEA HPT Annex 51: Acoustic Signatures of Heat Pumps

The aim of the project was to increase the acceptance of heat pumps by reducing their noise emissions and vibrations and to reduce market barriers. Using innovative measurement and data analysis methods, influencing factors on the acoustic emissions of heat pump systems and the impact of acoustic protection measures were investigated. The results were prepared in the form of guidelines and recommendations for action.

Internationale Energieagentur (IEA)

IEA ES Task 41: Economics of Energy Storage

What is the value of energy storage and how can it be quantified? How can the benefits and value of energy storage be translated into promising business models? The Task will conduct a coordinated methodological assessment of the economic viability of energy storage (electrical, thermal, and chemical) in applications relevant to the energy system. This will be used to derive preferred conditions for energy storage configurations.

Internationale Energieagentur (IEA)

IEA 4E Annex: Mapping and Benchmarking

In the Mapping and Benchmarking work (formerly M&B Annex) the following product were analyzed: domestic refrigeration (update), dishwashers, settop boxes, transformers and lights, for which this report includes most relevant results and the related M&B publications. It also introduces the 2015-2016 work on motors, liquid chillers, and water boilers.

Internationale Energieagentur (IEA)

IEA EBC Annex 81: Data-Driven Smart Buildings

The latest developments in digitization have the potential to significantly reduce the costs of building operations. The annex is intended to improve access to low-cost, high-quality data from buildings and to support the development of data-driven energy efficiency applications and analyses. This enables the optimization of building controls in real time and offers energy efficiency data and decision support for building managers.

Internationale Energieagentur (IEA)

IEA SHC Task 61/EBC Annex 77: Integrated Solutions for Daylighting and Electric Lighting

Lighting accounts for around 15% of global electricity consumption - intelligent coordination of daylighting and electric lighting solutions together with integral lighting controls enable significant energy savings. At the same time, the solutions must be optimally planned in a user-centered approach based on the visual and non-visual effects of light. The task analysed user requirements as well as existing technologies and design methods and documented exemplary implementations in case studies.

Internationale Energieagentur (IEA)

IEA DHC Annex TS4: Digitalisation of District Heating and Cooling

The aim of the IEA DHC Annex TS4 is to identify the possibilities of digitalization and the integration of digital process for district heating and cooling. To this end, the Annex TS4 establishes a platform for industrial and scientific experts to strengthen international cooperation and networking and the exchange of experience of national research and development activities.

Internationale Energieagentur (IEA)

IEA DHC Annex TS3: Hybrid Energy Networks, District Heating and Cooling Networks in an Integrated Energy System Context Guidebook

Hybrid energy networks, i.e. the integration of electricity, heat and gas networks, can make a decisive contribution to optimizing the energy system. The IEA DHC Annex TS3 analyses the potentials and challenges of hybrid energy networks from the perspective of the district heating / cooling system. This is including the analyses of relevant technologies and synergies, an assessment of the different methodological approaches and tools, the analyses of case studies as well as the development of suitable business models and regulations.

Internationale Energieagentur (IEA)

IEA AFC Annex 31: Polymer electrolyte membrane fuel cell (Working period 2017 - 2019)

Task 31 is a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).

Internationale Energieagentur (IEA)

IEA EBC Annex 71: Building Energy Performance Assessment Based on In-situ Measurements

The requirements on building envelope and on building technology are steadily increasing. There is a lack of measurement and analysis methods to control the quality of the built implementation and to optimize the building operation. This project developed a methodological basis to enable an in-situ evaluation of the actual energy performance and building operation. For this purpose, it investigated methods to generate data-driven building models favouring the use of already available on-board data.

Internationale Energieagentur (IEA)

IEA District Heating and Cooling (DHC TCP)

The TCP on District Heating and Cooling (DHC) was founded in 1983. It deals with the design, performance and operation of DHC and Combined Heat and Power systems as powerful tools for energy conservation and the reduction of environmental impacts of supplying heat.