Suchergebnisse
ZERMEG III - Decision guidance for the visualisation of the achievements of sustainable corporate strategies
ZERMEG III creates a virtual factory of the future from the combination of the research results of different projects. This model will be used to generate real experience for managers in experimenting taking organisational and technical decisions with regard to a sustainable development.
RAILWASTE - Production of railway sleepers by mixed plastic waste (SUSPRISE Joint Call)
Production of railway crossties ("sleepers") from an alternative (renewable) raw material
Bio-R: Applications for treating Cellulosic bodies with supercritical carbon dioxide
The target of this project is the screening of the opportunities, resulting of the combination of treating Cellulosic bodies with supercritical carbon dioxide. In general, the change of the porous structure depending on the way of fiber drying and the opportunity to incorporate active compounds and the development of analytical methods to track them within Cellulosic bodies.
Apple & pear cascade: more value added in the Mostviertel region through bio-cascading
Creating a concept for the bio-cascading of apple and pear pomace in the Mostviertel region for an increased value added through innovative local products. Development of strategies for the implementation of a pilot plant.
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.
Quantitative and qualitative identification of relevant secondary raw material flows in Austria
In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.
Ecologically friendly resin impregnation of rotating machines with the use of the joule effect
Windings of rotating machines or electrical generators (e. g. wind and water power generators) are impregnated with resin. A new technology using the heating effect of current is investigated. The high efficiency of heating with the joule effect results in quick heating of stator leading to fast gelling of the resin, which implies low emission.
Integrated Service Models for increased resource-efficiency in the business-to-business sector (INERIWI)
For the major resource intensive commercial sectors the real function of products will be ana-lysed and elaborated how to provide the function of the product without selling it. Based on the present material intensity of the branches the potential reduction of environmental burden by applying such models as well as economic and social implications will be deduced.
Data-based processes for the creation and formulation of production data for complex industrial plants.
Development and evaluation of a process to automatically create models from existing production data of industrial plants. These models can be used to optimize the production process and plant equipment (scrap, quality, use of raw materials and energy) or to detect and predict faults.
Pilot machine for the production of lightweight sandwich-elements in batch mode consisting only of one polymer component.
Further development of a new technology for the production of lightweight sandwich-elements consisting only of one polymer component (for example polypropylene). This pilot machine is the basis to get all the necessary figures and experience for the development of the production machine and to produce the first parts of the car bodies for the zero series.
ZERMEG - Zero Emission Retrofitting Of Existing Galvanizing Plants
Method to optimize existing galvanizing plants consequently with the goal of zero emission and zero waste enterprises, to minimize operating cost including benchmarks and three case studies
ZERMET - Zero Emission Retrofitting For Existing Textile Plants
Minimisation of the consumption of water, chemicals and energy in the textile industry. Further development of the ZERMEG approach in the form of a questionnaire and application in the textile industry.
SERECARB - SElective REcovery of Calcium CARBonate in paper sludge (SUSPRISE Joint Call)
Developing a new process based on selective recovery of calcium carbonate from paper mill effluents and sludge, purification, conversion into precipitated calcium carbonate (PCC) and reuse as filler in paper making.
Development of low emission cleaning processes for metal surfaces considering manufacturing processes within the automotive industry
Development of technological optimisation of cleaning processes within the automotive industry which guarantee defined cleaning requirements and fulfil the criteria of a sustainable process design with near zero emissions.
Development of methods and procedures to automate the operative production control and scheduling considering the aspects of sustainability
The production order doesn't only influence logistic and operational ratios, but also shows effects on the environment as well as ergonomics and the staff's psychology. Aim of the project was to develop a method to optimize the job order planning in consideration of an integrated evaluation in terms of sustainable economic activity.
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Development of a method and an innovative machine for the industrial application of environmentally friendly, mineral oil free lubricants in deep drawing processes
Eliminating the usage of mineral oil based lubricants in deep drawing processes by an innovative machine for clean application of environmentally friendly wax-based forming emulsions.
GREEN BIOREFINERY - Technical, economic and ecological optimisation of value chains by the introduction and efficient use of sustainable raw materials (SUSPRISE Joint Call)
Green Biorefinery stands for the sustainable and highly integrated processing of green biomass into multiple products. The project deals with the assessment and development of required technology for selected feedstock and evaluates market potential for out-products as well as the implementation potential for introduced processes.
PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement
Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.