Material utilization of end-of-term textiles

Mechanical processing of the non-reusable part of collected end-of-life apparels (e.g. cutting, sifting, etc.); development of marketable application for the obtained short fibers in the field of construction materials (e.g. bitumen modification)

Secondary Materials in the Austrian Textile Industry - Study with Recommendations for the Austrian R&D-Politics

This study deals with the challenges and potentials for the use of secondary materials in the Austrian textile industry. It identifies challenges and potentials for establishing cycles in the textile industry with a focus on the use of secondary materials in Austria based on broad stakeholder involvement. Based on this, recommendations for research and development activities were formulated to promote recycling.

Reduction of Broke in Paper Production

Development of a measurement and control system that detects paper deformation during production. Thus, broke is reduced, significant savings in energy use are achieved, and the economic efficiency is well increased.

ZERIA 3 (Zero Emissions Research in Application)

Elaboration of the principles for zero emission enterprises. The results show that this approach can be realistic and economically advantageous in many cases.

Improvement of resource efficient use of wood

Modelling of wood processing in order to demonstrate the developments' impacts on performance

THECLA

Repa & Service Mobil

Development/preparation of a mobile repair and service-point and pilot-implementation at large company sites or centres with high customer-frequency. Supporting of sustainable product-services - especially repair-services - in connection with efficient logistical and organisational processes in relation to product-service-systems; reduction of market-barriers and sensitisation of the general public for sustainable consumption.

Investigation of the sustainable utilisation of carbon from methane pyrolysis

One of the possible alternative production routes for renewable hydrogen is methane pyrolysis. Compared to other, alternative production routes, methane pyrolysis has the lowest energy input (less than a quarter of water electrolysis) with a very high hydrogen yield.

De-lacquering as a service

Development of the service of de-lacquering in industrial plants on the basis of pulsed high pressure water with a new, energy efficient high pressure pump. Further possible applications will be searched for and evaluated.

Bio-Minimum-Lubrication

Development of a Minimum quantity lubrication system employed in metal working industry using an oil-in-water emulsion based on renewable primary products.

ZERMET - Zero Emission Retrofitting For Existing Textile Plants

Minimisation of the consumption of water, chemicals and energy in the textile industry. Further development of the ZERMEG approach in the form of a questionnaire and application in the textile industry.

ZERMEG - Zero Emission Retrofitting Of Existing Galvanizing Plants

Method to optimize existing galvanizing plants consequently with the goal of zero emission and zero waste enterprises, to minimize operating cost including benchmarks and three case studies

Bio-R: Applications for treating Cellulosic bodies with supercritical carbon dioxide

The target of this project is the screening of the opportunities, resulting of the combination of treating Cellulosic bodies with supercritical carbon dioxide. In general, the change of the porous structure depending on the way of fiber drying and the opportunity to incorporate active compounds and the development of analytical methods to track them within Cellulosic bodies.

NATHPRO: Development of NATural fiber High performance pultrusion PROfiles (SUSPRISE Joint Call)

Development of strong, light, weather and heat resistant natural fiber profiles by combining the the advantages of a pultrusion technology with the advantages of natural fibers.

Apple & pear cascade: more value added in the Mostviertel region through bio-cascading

Creating a concept for the bio-cascading of apple and pear pomace in the Mostviertel region for an increased value added through innovative local products. Development of strategies for the implementation of a pilot plant.

Wood-processing employing a superimposition of ultrasonic vibrations

Development of wood-processing techniques employing high-frequency ultrasonic vibrations in terms of applications in the woodworking industry.

New solvents and processes for post-combustion CO2 capture

New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.

Waste heat utilisation and use of renewable energy sources in a metal-working enterprise

Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.

NATUBAR - Natural raw materials for specific barrier applications in paper and board (SUSPRISE Joint Call)

NATUBAR is an industrial research project. It consists of researching and developing a totally new approach to starch modification namely selective oxidation as patented by Glycanex as well as the application in modern folding box boards and the photopaper production environment.

SERECARB - SElective REcovery of Calcium CARBonate in paper sludge (SUSPRISE Joint Call)

Developing a new process based on selective recovery of calcium carbonate from paper mill effluents and sludge, purification, conversion into precipitated calcium carbonate (PCC) and reuse as filler in paper making.