Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
metaTGA - Metadaten und Prozessmodelle für Open BIM in der TGA
Ziel dieses Projektes ist es, eine Methodik für die Entwicklung von Daten- und Prozessmodellen zu konzipieren und diese zur Modellierung ausgewählter TGA (Technische Gebäudeausrüstung)-Systeme exemplarisch anzuwenden. Dazu werden schwerpunktmäßig, jedoch nicht ausschließlich, die erneuerbaren Heizungstechnologien Wärmepumpe, Solarthermie und Biomasse sowie Lüftungssysteme betrachtet. Die entwickelten Daten- und Prozessmodelle werden im Rahmen von zwei Pilotprojekten evaluiert. Die Projektergebnisse werden in einem TGA-BIM-Leitfaden publiziert und in BIM-Arbeitsgruppen in relevanten Gremien eingebracht.
Sondierung für PV-Fassadensysteme aus leichten Kunststoff-Modulen mit reversiblen Befestigungen für Neu- und Altbauten (PV-FAS_light+easy)
Sondierung für ein neues einfaches, kostengünstiges und gebäudeintegrierbares PV-Fassaden-System aus Kunststoff-PV-Modulen durch erste Untersuchungen zur Befestigungstechnik, zur Bauphysik, zum Brandschutz und zur Elektrotechnik um die Gebrauchstauglichkeit, die Anwendbarkeitsbereiche und das Ertrags- und Anwendungspotenzial für den Neubau und für Bestandsgebäude beurteilen zu können.
The Green Parking Space – Nutzung von städtischen Verkehrsflächen für die Produktion von Biomasse
Zahlreiche Verkehrsflächen im städtischen Umfeld werden nur einen geringen Teil der Zeit tatsächlich genutzt. Inhalt dieses Projekt war, die Möglichkeit zu untersuchen, solche Flächen durch Integration von Photobioreaktoren zusätzlich zur Produktion von Biomasse zu nutzen und die Systeme möglichst vollständig in die urbanen Stoff- und Energiekreisläufe einzubinden.
fit4power2heat - Sondierung zur Realisierung des Wärmepumpenpooling für städtische Wärmenetze
Die Integration von Wärmepumpen kann die Wirtschaftlichkeit bestehender Wärmenetze erhöhen und gleichzeitig den hohen Kosten für den Ausbau der Stromnetze entgegenwirken. Ziel des Projektes ist es, innovative Geschäftsmodelle für kleine und mittlere städtische Wärmenetze zu entwickeln, insbesondere hinsichtlich der Synergien zwischen Wärme- und Strommarkt. Hauptfokus ist die Anwendung eines Wärmepumpen-Poolings über mehrere Wärmenetze.
ÖKO-OPT-QUART - Ökonomisch optimiertes Regelungs- und Betriebsverhalten komplexer Energieverbünde zukünftiger Stadtquartiere
Im Projekt ÖKO-OPT-QUART wurden energietechnische, ökonomische und regelungstechnische Modelle zur Simulation der Betriebsführung komplexer, nachhaltiger Energieverbünde für Stadtquartiere entwickelt. Diese Modelle werden danach für eine Beispielkonfiguration zu einem umfassenden Gesamtmodell kombiniert und erlauben einen realistischen ökonomischen Vergleich verschiedener Regelungsstrategien. Das übergeordnete Ziel des Projekts ist die Entwicklung einer Methode zur systematischen Erstellung kostenoptimierender, vorausschauender Regelungsstrategien für komplexe Energieverbünde in Stadtquartieren.
P³Power - Plug&Play Storage of Photovoltaic Power
Im Projekt P³Power wird die Messtechnologie NetDetection (Abschätzung des Leistungsverbrauchs an einer Phase von einem beliebigen Messpunkt, z.B. einer Steckdose, in einem Haushalt) entwickelt. Auf Basis dieser Technologie werden plug&play Photovoltaik- und Speichersysteme realisiert, welche 100% Eigennutzung innerhalb beliebiger Aggregationsgrößen - vom Mehrfamilienhaus bis zur Gemeinde - ermöglichen ohne bestehende Installationen adaptieren zu müssen. Die Technologie wird digitalisiert, im Laborumfeld und in Realhaushalten getestet und zu einem umfassenden Energie-Service-Angebot weiterentwickelt.
ÖKO-OPT-QUART - Economically optimized control and operating mode of complex energy networks of future city districts
In the project ÖKO-OPT-QUART energy-based, economic and control-orientated models will be developed in order to simulate the operating mode of complex, sustainable energy networks in city districts. For an exemplary configuration these models will be combined to an overall model which allows a realistic economic comparison of different control strategies. The final goal of the project is the development of a method for the systematic design of cost-optimized, predictive control strategies for complex energy networks in city districts.
MehrWertStrom 2030 - PV-Community system - Exploring a participatory pilot project with regional added value for structurally weak regions
The "MehrWertStrom 2030" project analysed the legal, technical, organizational and economic feasibility of PV community joint venture facilities on multi-party buildings including the added value for structurally weak regions and developed innovative solutions related to organization, financing and realization.
fit4power2heat
The integration of heat pumps can increase the cost effectiveness of existing heating networks and counter the high costs for the expansion of power grids at the same time. Aim of the project is to develop innovative business models for small and medium municipal heating networks with focus on synergies between heat and power market. Main focus is a heat pump pooling for several heat grids.
P³Power - Plug&Play Storage of Photovoltaic Power
The core of the project P³Power is the measurement technology NetDetection, which is able to detect the power consumption of a household from any point, e.g. a regular wall socket. Based on this technology a plug&play powerplant, consisting of photovoltaics and battery pack, is realized. The system is able to guarantee 100% self-consumption within flexible aggregates (from single households to whole communes) without any changes of existing infrastructure. The measurement technology will be implemented into digital hardware, evaluated comprehensively in lab and household environment and subsequently new energy service business models are developed.
Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)
Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.
The Green Parking Space – Utilization of urban parking areas for production of biomass
Many traffic areas in urban environments are actually used as such only a small fraction of the time. Subject of this project was to investigate the possibility of using those areas by additional integration of photobioreactors for the production of biomass, integrating such systems to the maximum extent into the urban substance and energy cycles.
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.