Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Integral SUN2000 Modulkollektor
Entwicklung eines neuartigen Systemkollektors mit höchster Lebensdauer und niedrigsten Montagezeiten
Information systems for ecological industry clusters - Case study industrial region Mödling (Lower Austria)
Development of a comprehensive, transparent and user-friendly concept of enhanced interlinkage of material and energy flows through increased information exchange and shows the resulting pollution reducing in conjunction with economic benefits for the companies.
CPC - Leichtbaukollektor
Ausgehend von unserem bewährten CPC-Kollektor SOLARFOCUS S1 soll der CPC-Leichtbaukollektor im Hinblick auf effizientesten Materialeinsatz und größtmöglichen Solarenergieertrag im Hochtemperaturbereich optimiert werden
Sustainable Business Planner - IT-gestütztes Managementtool zur Integration der Leitprinzipien des Impulsprogramms "Nachhaltig Wirtschaften" in Businesspläne.
Weiterentwicklung des etablierten Managementkonzepts Businessplan zum Sustainable Businessplan. Erstellung, Erprobung und Verbreitung des ganzheitlichen nutzerorientierten IT-Tools "Sustainable Business Planner" im Rahmen einer österreichweiten GründerInnen-Initiative.
Umweltzeichen PLUS (UZ+): Erweiterung des Österreichischen Umweltzeichens um Aspekte der Nachhaltigkeit
Aspekte der Nachhaltigkeit gewinnen bei Konsumenten, Unternehmen und in der Öffentlichkeit zunehmend Bedeutung gegenüber rein ökologischen Zielsetzungen. Das bekannte Österreichische Umweltzeichen soll in Richtung dieser umfassenden Ansprüche erweitert werden.
Bioethanolproduktion aus Lignocellulosen mit Steamexplosion
Aus den Abfallstoffen Stroh und Holz soll durch geeignete Vorbehandlung in dezentralen Anlagen Bioalkohol produziert werden. Klimarelevante Abfallstoffe werden zu Biotreibstoffen annähernd CO2-neutral umgewandelt, wobei eine regionale Wertschöpfung vorgesehen ist.
Holzbearbeitung mit Überlagerung einer Ultraschall-Wechselbeanspruchung
Entwicklung von Verfahren zur Holzbearbeitung unterstützt durch hochfrequente Ultraschallvibration in Hinsicht auf Anwendungen in der holzverarbeitenden Industrie.
Solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller
A solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller has been developed. The necessary components were built and tested and finally put together to get an operating pilot plant at the test facility.
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.
EASEY - Ecological And Social EfficiencY
Indikatorenmodell zur sozialökologischen Bewertung der ATX Prime Market Unternehmungen auf ihrem Weg zur Nachhaltigkeit
Pilot-Biogas plant consisting of prefabricated units
Construction of a biogas tank built of prefabricated reinforced concrete elements, erected and operated at an existing biogas plant in Bruck an der Leitha. The precast concrete technology promised a lot of advantages but also posed a lot of questions that had to be solved. These problems considered especially the sealing method and the general construction with precast concrete elements.
Development of a continuous hydrogen-carbon nanofibers production line
With the development of a hydrogen-carbon nanofiber production in a continuous process carbon nanofibers can be produced in an economic way and at the same time access to environmentally friendly hydrogen is enabled.
Ecologically friendly resin impregnation of rotating machines with the use of the joule effect
Windings of rotating machines or electrical generators (e. g. wind and water power generators) are impregnated with resin. A new technology using the heating effect of current is investigated. The high efficiency of heating with the joule effect results in quick heating of stator leading to fast gelling of the resin, which implies low emission.
EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production
EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.
RAINBOW 2
Überführung der in Rainbow 1 erarbeiteten Kenntnisse zur Entwicklung funktionalisierter Fasern aus nachwachsenden Rohstoffen in einen halbtechnischen Maßstab sowie auf verschiedene Faserherstellungsverfahren.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
Application of the Stirling cycle for environmentally compatible cooling - systems analysis
Conventional cooling has adverse effects on environment (eg. ozone depletion, global warming). One option for environmentally compatible cooling systems for near ambient temperatures (-10 to -50°C) is the Stirling cooler with environmental friendly process.
Instationarity as a limiting factor for the use of industrial waste heat in heating-networks
Industrial waste heat is predominantly instationary. Thus utilisation of industrial waste heat in district heating systems is constrained. A database and an evaluation methodology were developed to support increased utilisation of this heat source.
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes. The operating performance and optimization possibilities of a prototype were evaluated and an improved prototype was tested with respect to its efficiency characteristics as well as in a small-scale application with a realistic load profile.