Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Reduction of Broke in Paper Production
Development of a measurement and control system that detects paper deformation during production. Thus, broke is reduced, significant savings in energy use are achieved, and the economic efficiency is well increased.
ZERIA 3 (Zero Emissions Research in Application)
Elaboration of the principles for zero emission enterprises. The results show that this approach can be realistic and economically advantageous in many cases.
Thermal detection of cracks on glowing wire during the process of rolling with regard to reduction of rejections
Developing a non-destructive and fully automated testing to detect surface cracks and laps in rolled wires during the production at temperature values of 800-1000°C and at a material speed of 30-40 m/s, with regard to reduction of rejections.
ZERMEG III - Decision guidance for the visualisation of the achievements of sustainable corporate strategies
ZERMEG III creates a virtual factory of the future from the combination of the research results of different projects. This model will be used to generate real experience for managers in experimenting taking organisational and technical decisions with regard to a sustainable development.
Development of methods and procedures to automate the operative production control and scheduling considering the aspects of sustainability
The production order doesn't only influence logistic and operational ratios, but also shows effects on the environment as well as ergonomics and the staff's psychology. Aim of the project was to develop a method to optimize the job order planning in consideration of an integrated evaluation in terms of sustainable economic activity.
RAILWASTE - Production of railway sleepers by mixed plastic waste (SUSPRISE Joint Call)
Production of railway crossties ("sleepers") from an alternative (renewable) raw material
ZERMET - Zero Emission Retrofitting For Existing Textile Plants
Minimisation of the consumption of water, chemicals and energy in the textile industry. Further development of the ZERMEG approach in the form of a questionnaire and application in the textile industry.
GREEN BIOREFINERY - Technical, economic and ecological optimisation of value chains by the introduction and efficient use of sustainable raw materials (SUSPRISE Joint Call)
Green Biorefinery stands for the sustainable and highly integrated processing of green biomass into multiple products. The project deals with the assessment and development of required technology for selected feedstock and evaluates market potential for out-products as well as the implementation potential for introduced processes.
Apple & pear cascade: more value added in the Mostviertel region through bio-cascading
Creating a concept for the bio-cascading of apple and pear pomace in the Mostviertel region for an increased value added through innovative local products. Development of strategies for the implementation of a pilot plant.
Development of low emission cleaning processes for metal surfaces considering manufacturing processes within the automotive industry
Development of technological optimisation of cleaning processes within the automotive industry which guarantee defined cleaning requirements and fulfil the criteria of a sustainable process design with near zero emissions.
Development of a method and an innovative machine for the industrial application of environmentally friendly, mineral oil free lubricants in deep drawing processes
Eliminating the usage of mineral oil based lubricants in deep drawing processes by an innovative machine for clean application of environmentally friendly wax-based forming emulsions.
Pilot machine for the production of lightweight sandwich-elements in batch mode consisting only of one polymer component.
Further development of a new technology for the production of lightweight sandwich-elements consisting only of one polymer component (for example polypropylene). This pilot machine is the basis to get all the necessary figures and experience for the development of the production machine and to produce the first parts of the car bodies for the zero series.
Bio-Minimum-Lubrication
Development of a Minimum quantity lubrication system employed in metal working industry using an oil-in-water emulsion based on renewable primary products.
NATHPRO: Development of NATural fiber High performance pultrusion PROfiles (SUSPRISE Joint Call)
Development of strong, light, weather and heat resistant natural fiber profiles by combining the the advantages of a pultrusion technology with the advantages of natural fibers.
SERECARB - SElective REcovery of Calcium CARBonate in paper sludge (SUSPRISE Joint Call)
Developing a new process based on selective recovery of calcium carbonate from paper mill effluents and sludge, purification, conversion into precipitated calcium carbonate (PCC) and reuse as filler in paper making.
NATUBAR - Natural raw materials for specific barrier applications in paper and board (SUSPRISE Joint Call)
NATUBAR is an industrial research project. It consists of researching and developing a totally new approach to starch modification namely selective oxidation as patented by Glycanex as well as the application in modern folding box boards and the photopaper production environment.
ZERMEG II - Zero emission retrofitting method for existing galvanising plants
ZERMEG II is the follow up project of ZERMEG, which was commissioned after the first call of the Austrian Factory of the Future program in 2001. The project developed a method to revamp existing galvanising plants in order to operate them with a maximum reduction of the use of chemicals and maximum recycling.
Development of an eco-efficient alternate building material by using biogenic fountain remnants to act as binders
Development of alternative construction material "Mixolith" with wood ashes from power plants (biomass energy) as hydraulic binders. Evidence of product properties for construction of embankment safeguard dams or road construction. Many years of experience with alternative construction material.
Bio-R: Applications for treating Cellulosic bodies with supercritical carbon dioxide
The target of this project is the screening of the opportunities, resulting of the combination of treating Cellulosic bodies with supercritical carbon dioxide. In general, the change of the porous structure depending on the way of fiber drying and the opportunity to incorporate active compounds and the development of analytical methods to track them within Cellulosic bodies.
Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)
For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.