Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA-SHC Task 50: Advanced Lighting Solutions for Retrofitting Buildings
Retrofitting of non-residential buildings with energy efficient daylight and artificial lighting solutions can significantly contribute to reductions in electric energy consumption. However, appropriate technologies have to be made available to the stakeholders (investors, industry, consultants, designer) that are involved in the retrofitting process. Thus, system solutions for daylighting and artificial lighting were evaluated, simple rating and evaluation tools were developed and case studies that serve as best practice examples were monitored. The results were collected in the Lighting Retrofit Advisor, which helps stakeholders within the lighting retrofit process.
Energy-Sponge-Bruck (Energieschwamm Bruck an der Mur)
The aim of the exploration-study for the urban region Bruck/Oberaich "Energieschwamm Bruck" or "Energy-Sponge-Bruck" was to establish clear and stringent basics for a flexible development of the future energy system. Therefore an energy development concept as well as a cadaster for short-term implementation measures had been applied. The structured, Bruck-based approach acts as framework for a general energy-conception-method, valid for small and medium urban regions with 10,000 to 20,000 inhabitants.
ThinkHome: Improved energy efficiency based on artificial intelligence in future homes
ThinkHome is a networked controlled home of the future with the ultimate goal to optimise energy efficiency and user comfort at the same time. On this way, smart interaction between all building services is of utmost importance. Goals of this project include the definition of a comprehensive knowledge base that holds all relevant building data, the evaluation of control strategies based on artificial intelligence and machine learning, as well as agent based software engineering.
Economic usage of Photovoltaic electricity in buildings
The aim of this project is to optimise the direct usage of PV-electricity produced in buildings. The main question concerning the right dimensioning of the PV generator should be answered in order to achieve a high direct usage rate of produced PV electricity under economic considerations. This analysis will be carried out for various building categories. As result, a calculation method will be developed (incl. report), in order to achieve the optimal, most economic PV system for various building categories and user typologies.
GameOpSys - Gamification for optimizing the energy consumption of buildings and higher-level systems
The central goal is the development of a mobile application that enables the energy optimization and planning of buildings, neighborhoods and higher-level energy systems through the participation of the user and the user as a new source of data and information. The development of the application is strongly transdisciplinary and integrates mathematical methods of simulation and optimization as well as psychological aspects of user behavior in order to develop new business models and open up new markets.
R-Bau - Development of a replicable deconstruction strategy for residential buildings to force the recovery-oriented dismantling
The aim of the project was to develop a replicable deconstruction strategy for residential buildings to force the recovery-oriented dismantling. The key aspects of the project are the development of standardized building models in order to analyse the recovery-oriented dismantling process, the design of a deconstruction catalogue and the transfer of the project findings to refurbishment, design and erecting of residential buildings.
Stakeholder process of the initiative "Reference architecture for secure Smart Grids in Austria"
The project worked out the development of a smart grids reference architecture for Austria under involvement of all actors. Based on technological-scientific elements a process which met the requirements of stakeholders like operators of infrastructure, industry and also public agencies had been worked out to achieve nationally accepted and internationally orientated reference architecture.
IEA DHC Annex TS7: Industry-DHC Symbiosis - A systemic approach for highly integrated industrial and thermal energy systems
Renewable and excess heat sources are currently representing nearly a third of the energy supply used in the DHC sector. Excess heat has the potential to further grow to become an important part of the energy puzzle. Up to 25% of district heating could be covered by industrial excess heat and more than 10 % of the EU's total energy demand for heating and hot water could be covered by heat from data centres, metro stations, service sector buildings, and waste-water treatment plants.
ISEC 2024 - International Sustainable Energy Conference
10. – 11. April 2024
Messecongress Graz, Austria
The focus of ISEC 2024 will be on how we can achieve energy sovereignty within a time horizon dictated by climate change and defined by politics.
SYSPEQ - Systemische Lösung zum Betrieb von Plusenergiequartieren
Full-scale planning concepts for positive energy districts (PEDs) and their operation as energy communities (ECs). The focus is on the implementation in the existing building stock, especially in the area of social/non-profit housing. Financing options for renewable generation units, planning and operation of a PED (especially as an EC), marketing opportunities for surplus electricity and the development of an information and networking platform are part of this project. A special highlight is the practical proof-of-concept in Fuchsenloch, which is a social housing quarter of Sozialbau.
P2H-Pot - Potentials, economic feasibility and system solutions for Power-to-Heat
P2H-Pot has identified economically feasible potentials for Power-to-Heat (P2H) in urban regions. The suitability of different technical system configurations were investigated using thermodynamic simulation and considering experiences from Scandinavian cases. The assessment of short, medium and long term relevance and economic feasibility of P2H were accomplished by simulating model-based scenarios up to 2050 of the Austrian and German electricity and heat market. In cooperation with a district heating company three case studies have been carried out.
WHISCERS. Whole House In-Situ Carbon & Emission Reduction Solution
Whiscers is a system for installing internal wall insulation with minimal mess, whilst the resident remains in the property. It involves measuring the walls in the property using a laser device that enables fast and highly accurate measurement. Information is then sent electronically to a computer controlled off-site cutting machine that is rapid, precise and mess-free.
RISKMIN - Risk minimization along the value-added chain of plants to the colouring pigments
RISKMIN is a project for the mitigation of risks along the supply chain of plant raw material to the provision of plant dyestuff. Considering the measures concerning risk mitigation, a business plan for a plant dyestuff manufacturer for the effective realization of the business idea was created.
MODESTORE - Modular High Energy Density Sorption Heat Storage
Seasonal storage of solar heat for use in low energy and passive houses (new buildings as well as old buildings).
Conference: Air Source Heat Pumps in Retrofitting Applications
7th May 2015
AIT Austrian Institute of Technology, Giefinggasse 21210 Vienna, AT
During the conference you will get an overview concerning the state of the art, current development in R&D, trends and perspectives in the field of air source heat pumps for retrofitting applications in urban areas.
circPLAST‐mr Mechanical Recycling of Plastics: Mechanisches Recycling von Kunststoffen: From waste plastics to high‐quality and specification‐compliant recyclates
The flagship project circPLAST‐mr pursues the following 4 main objectives: (1) to identify and explore previously unused potential for mechanical plastics recycling, (2) to define and test key process steps for this on a laboratory/pilot scale, (3) to demonstrate the eco‐efficient marketability of increased recycled plastic volumes, and (4) to demonstrate the scalability of the laboratory/pilot process steps to industrial scale.
Circular Economy Compass (KLW-Komp)
The Circular Economy Compass project will develop a responsive online self-assessment tool for the circular economy in SMEs. Based on a theory-based evaluation scheme, it will be possible to determine a company's degree of preparedness for a circular economy at a reasonable cost. To this end, the tool has a computational logic that automatically generates a circularity score (KPI, Key Performance Indicator) based on the answers.
Mechanical ventilation system for windows for the renovation of old buildings
Analysis and implementation of alternative ventilation systems for windows, focusing on thermal renovation of old buildings. The investigated ventilation systems were presented to an expert group. The aim was to discuss ventilation technologies with the help of different aspects and to develop a SWOT analysis.
Energy Flexible Buildings – Potential and Performance
26th September 2017, 10.00 a.m.
Kuppelsaal TU Wien, Karlsplatz, 1040 Vienna
The aim of this workshop was to bring together international experts and the Austrian building and demand response community for know-how exchange and discussion on the topic of energy-flexibility in buildings and its role for smart grids. The focus was on thermal and electricity based flexibility potential of buildings and practical experience with first implementations and demonstrations.
Refurbishment of a housing complex to passive-house standard, Graz - Dieselweg
Refurbishment of the former "Puch-Siedlung", built as a housing area for employees of the company "Puch", in Graz Liebenau, in the period from the 1950s to 1970s, as an exemplary model for a refurbishment in "passive house standard" with special thoughtfulness to the tenants. "From domestic fuel to solar self sufficiency"