There are 65 results.
The TCP on District Heating and Cooling (DHC) including Combined Heat and Power (CHP) was founded in 1983. It deals with the design, performance and operation of DHC and CHP systems as powerful tools for energy conservation and the reduction of environmental impacts of supplying heat.
The AMF TCP's vision is a sustainable transport system that uses advanced, alternative, and renewable fuels; has low emissions of Greenhouse Gases (GHGs) and air pollutants; and meets needs for personal mobility and mobility of goods. AMF provides a solid basis for decision making in form of information and recommendations as well as an international forum for sharing best practices and pooling resources for the achievement of this vision.
IEA 4E Annex Electronic Devices and Networks Annex - EDNA (working period 2017 – 2019) Task 3: "Intelligent efficiency". Project: "Basket of products testing"
The goal is the active participation and the representation of the Austrian position and interests in EDNA as well as exchange with and dissemination of results. Further, Austria shall contribute to Task 3 “Intelligent Effficiency” (IE) and the project “Basket of products testing”, in the form of documented measurements of the energy demand of selected products in network standby mode. Austria collaborates with Switzerland on two concept papers, namely „IoT as enabler“ and „Energy harvesting technolgies“. Two further concept papers on the topics “Energy monitoring systems” and “Efficiency of e-vehicle charging” will be prepared by Austria and brought to the EDNA working plan.
Promotion of energy efficiency of poly-phase electric AC motors and motor systems in relevant applications as pumps, fans, compressors and mechanical drives that are generally used in industry, infrastructure and large buildings. This work also included new technologies such as frequency inverters (adjustable speed drive) and permanent magnet motors.
In the Mapping and Benchmarking work (formerly M&B Annex) the following product were analyzed: domestic refrigeration (update), dishwashers, settop boxes, transformers and lights, for which this report includes most relevant results and the related M&B publications. It also introduces the 2015-2016 work on motors, liquid chillers, and water boilers.
The Power Electronic Conversion Technology Annex (PECTA) is planned as a new Annex to the IEA 4E TCP. PECTA shall assess the efficiency benefit of using the emerging WBG technology. PECTA will serve as base for policy makers and independent knowledge platform for all different types of stakeholders and all kind of parties interested in efficiency potential and integration of WBG.
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the „Policy Guidelines for Electric Motor Systems“ and recommendations for carrying out energy audits for motor systems based on international standards Austria will analyse the impact of industrial automation on electricity consumption and the motor market.
Task 31 was a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).
Task 31 is a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).
The main objective of Annex 33 “Stationary Applications” is to push the technology development of key components and systems. Market implementation and transformation will be supported by the analysis and development of the necessary political framework and instruments. The current technological, economic and political barriers are to be identified, solutions developed and the barriers gradually broken down. The Austrian Energy Agency represents Austria in Annex 33 - Stationary applications.
The aim of Annex 35 is the information exchange on the status and new developments of portable fuel cell systems and comprises the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units. In addition the setup and configuration of hybridized systems and the key topics of secure operation, codes and standards are of interest.
The aim of Annex 35 of Technology Collaboration Programm on Advanced Fuel Cells of the International Energy Agency (IEA) included information exchange on the status and new developments of portable fuel cell systems such as the direct ethanol fuel cell (DEFC) and the direct borohydride fuel cell (DBFC) and comprised the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units.
The main goal of the IEA Advanced Fuel Cells programme is to enhance the technology development of key components and systems of fuel cells; furthermore to prepare the market implementation of fuel cells by analysis/development of the necessary policy frame work (incl. necessary instruments) and the elimination of existing barriers.
IEA Action Network "Intelligent Energy Systems": International Smart Grid Action Network (ISGAN TCP)
The International Smart Grid Action Network (ISGAN) creates a strategic platform to support high-level government attention and action for the accelerated development and deployment of smarter, cleaner electricity grids around the world.
IEA DSM Task 17 - Extension: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages (working period 2013 - 2016)
The aim was to exchange experiences and developments in the field of integrating renewables with the help of DSM in residential and commercial buildings. Technologies like PV systems, electric vehicles, electric storages, heat pumps, micro-CHP in combination with energy management systems (via gateways), and implementing dynamic tariffs using smart meters offer huge potential to increase energy efficiency. Phase 3 of this Task addressed the current role and potential of flexible buildings and their related implied changes and impacts on the grid and markets. The scalability and applicability of successful projects with respect to specific regional differences and requirements was also explored.
IEA DSM Task 17: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages
The main objective of the proposed Task is to study how to achieve the optimal integration of distributed generation, energy storages and flexible demand, and thus increase the value of distributed generation and demand response and decrease problems caused by intermittent distributed generation (mainly based on RES) in the physical electricity systems and at the electricity market. The Task deals with distributed energy resources both at local (distribution network and customer) level and at transmission system level where large wind farms are connected.
IEA DSM Task 24: Behaviour Change in DSM – Helping the Behaviour Changers (Working period 2015-2017)
More than 20% of the use of energy for small consumers can be saved by changed behaviours. Past efforts to tap these potentials through DSM-interventions are not effective. The Task 24 dealt with the most important actors groups as well as tools, which support the behaviour changers in their daily work. In addition, an assessment method for DSM-interventions in the frame of the Austrian law on energy efficiency was elaborated.
This task aims at the identification and development of effective business models for energy services, which lead to a sustainable growth of energy efficiency services. Therefore the various national framework conditions and contexts have been analysed, that are necessary for a successful development of such business models. Examples for start-ups and entrepreneurs have been discussed, their challenges and deficits as well as success factors in terms of capabilities/skills identified and out of these findings a web based analysis tool been developed.
Demand Side Management (DSM) refers to the implementation of energy efficiency improvements and service management measures on the side of end users for optimising energy systems overall. This IEA-research programme pushes development of suitable technologies, applications and methods for end users and thus facilitates their preferential adoption in all political decisions on energy policy.
IEA EBC Annex 55: Reliability of Energy Efficient Building Retrofitting - Probability Assessment of Performance & Cost (RAP-RETRO)
The scope of the project is to develop and provide decision support data and tools for energy retrofitting measures. The tools will be based on probabilistic methodologies for prediction of energy use, life cycle cost and functional performance. The impact of uncertainty on the performance and costs will be considered. Methods based on probability give powerful tools that can provide us with reliable ranges for the outcome.