IEA Tasks & Annexes Topics
There are 256 results.
IEA Bioenergy Task 39: Biofuels to Decarbonize Transport (Working period 2022 - 2024)
The overall goal of Task 39 is to facilitate the commercialization of biogenic, sustainable, low-carbon transportation fuels. This includes conventional and advanced biofuels produced through various technological routes such as oleochemical, biochemical, thermochemical, and hybrid conversion technologies. The main goal is to accelerate the decarbonization of the transportation sector, with an increasing focus on long-distance transport, which is more difficult to electrify.
IEA DHC TS5 - Integration of Renewable Energy Sources into existing District Heating and Cooling Systems (RES DHC)
The expansion of sustainable district heating/cooling is an essential part of the Austrian heat transition. The transformation of these supply systems to fully renewable systems requires the combination of a multitude of aspects. The aim of the project is to compile a data and knowledge base from international projects in this context. Expertise and process know-how for the process of implementing the transformation of district heating and cooling systems will be collected and processed.
IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks
The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.
IEA HPT Annex 59: Heat Pumps for Drying Processes
Drying processes are highly energy-intensive and widespread in industry and commerce as well as in households in various forms. In this project, the potential for energy savings in drying processes in various applications will be investigated, which can be tapped through the use of heat pumps and made available to the relevant target groups in the form of guidelines, data, etc.
IEA ISGAN Working Group 9: Flexibility Markets - Development and Implementation (Working Period 2021 - 2023)
ISGAN Working Group 9 focuses on flexibilities in the power system and related market mechanisms. Main work areas include the integration of trading with flexibilities (redispatch), investigation of the needs of different market participants, identification and definition of flexibilities and their characteristics, development and scaling of interoperable flexibility markets, consumer-oriented understanding of flexibilities and the avoidance of stability or security losses due to diversity loss.
IEA Bioenergy Task 32: Biomass Combustion (Working Period 2022 - 2024)
Biomass combustion is an important technology for providing renewable energy worldwide. Almost half of the EU's energy consumption is used for heat, which, among other technologies, can be provided by biomass combustion in a climate-friendly manner. It is therefore a key technology for achieving national and international climate and energy goals. This project shall ensure the exchange of information on relevant topics in order to support the success of Austrian actors from industry and research.
IEA Bioenergy Task 33: Gasification of Biomass and Waste (Working Period 2022 - 2024)
The aim of Task 33 is to exchange information on the production and utilization of renewable gas from biomass and waste for the production of power, heat, biofuels and biochemicals. Especially the information exchange about R&D programs, implementation and possible markets is taken into account, to remove technical and non-technical barriers.
IEA Bioenergy Task 37: Energy from Biogas (Working Period 2022 - 2024)
Biogas technology is now widespread in many of the Task's participating countries. In addition to general knowledge sharing and highlighting best practice examples, the focus of the work in this triennium lies on the role of biogas in decarbonising industry and agriculture, biogas in the energy system and process optimisation in the area of emissions and process stability.
IEA Bioenergy Tasks 42: Biorefining in a Circular Economy (Working Period 2022 - 2024)
The aim of the IEA Bioenergy Task 42 is to facilitate the market introduction of environmentally friendly, socially acceptable and economical biorefineries. In addition to networking, the interaction between national and international stakeholders as well as the dissemination of the generated results via workshops, presentations, publications, etc. are important activities.
IEA Bioenergy Task 44: Flexible Bioenergy and System Integration (Working Period 2022 - 2024)
IEA Bioenergy Task 44 contributes to the development and analysis of bioenergy solutions that can provide flexible resources for a low carbon energy system. The objective is to improve the understanding on the types, quality and status of flexible bioenergy, and identification of barriers and future development needs in the context of the entire energy system (power, heat and transport).
IEA AFC Annex 34: Fuel Cells for Transportation (Working period 2022 - 2025)
The vision of the Technology Collaboration Programme on Advanced Fuel Cells (AFC TCP) is to make a significant contribution to addressing the opportunities and barriers to the commercialisation of fuel cells by promoting the development of fuel cell technologies and their applications at the international level. In detail, Annex 34 deals with the advantages and disadvantages of fuel cells, the further development of storage media, the recording of cost reduction potentials and the results analysis of pilot projects for mobile applications.
IEA HEV Task 46: LCA of Electric Trucks, Buses, Two-Wheelers and other Vehicles (Working period 2022 - 2025)
The objective of this R&D service is the participation in Task 46 of the IEA Hybrid and Electric Vehicle (HEV) TCP with the work on the internationally agreed topics and the managing of the task as Operating Agent. Beside the Life Cycle Assessment (LCA) studies of typical examples also methods for the assessment of climate neutrality and circularity are developed. This is done in dedicated expert workshops.
IEA Wind Task 52: Large-Scale Deployment of Wind Lidar (Working period 2022 - 2026)
Task 52 works towards the widespread adoption of wind LiDAR-systems and provides a strong opportunity to generate and spread knowledge and experience through global networking. Energiewerkstatt contributes to Task 52 with a comparative study of data availability of different LiDAR measurement principles under Alpine conditions and will take an organisational role in the creation of guidelines for the use of ground-based LiDAR in wind energy applications.
IEA Wind Task 54: Wind Energy in Cold Climates (Working period 2022 - 2024)
In order to achieve the development targets for renewable energies, generation plants will increasingly have to be installed at locations with more demanding technical and environmental conditions in the future. For wind energy, this means planning and operating turbines under icing conditions in many countries. The task investigates and evaluates technological solutions in this environment and publishes procedural recommendations in the form of technical reports and guidelines.
IEA 4E EDNA: Electronic Devices and Networks Annex (Working period 2022 - 2024)
By 2030, the number of network-connected electronic devices worldwide is expected to exceed 100 billion, resulting in significant consequences for global energy consumption. The IEA 4E Electronic Devices and Networks Annex - EDNA therefore aims to develop policy recommendations to promote the energy efficiency of network-connected devices, and make those project results available to key stakeholders such as policy makers and product developers in the form of reports, policy briefs and tools.
IEA SHC Task 68: Efficient Solar District Heating Systems (Working period 2022 - 2024)
Regarding the use of CO2-free technologies for local/district heating systems, solar technologies in particular offer an efficient option. In this task, the opportunities and challenges are investigated in order to efficiently provide the required temperatures necessary for local/district heating networks through solar technologies, to promote digitalisation, to identify new business models and measures for cost reduction, and to spread the knowledge about the potential of solar district heating systems.
IEA 4E Annex: Electric Motor Systems Task 3: New Industrial Developments and Digitalisation (Working period 2021 - 2024)
In Task 3 of the Electric Motor Systems Annex "New Industrial Developments and Digitalisation", the development of technical and political recommendations for the use of digital technologies for increased energy efficiency in electric motor systems is planned. For this purpose, industrial use cases will be described, user interviews conducted and policy instruments analysed.
IEA AMF Task 63: Sustainable Aviation Fuels (SAF) (Working period 2021 - 2023)
Sustainable aviation fuels can reduce aviation GHG emissions. However, this potential remains largely untapped as such fuels currently account for only 0.1% of total aviation fuel consumption. The aim of the task was to lay the foundation for joint R&D work and facilitate the introduction of sustainable aviation fuels by identifying stakeholders, assessing national situations and sharing information.
IEA HEV Task 41: Electric Freight Vehicles (Working period 2021 - 2022)
So far, the transformation of freight transport remains one of the biggest challenges on the path to zero emission. The Task's main objectives are to monitor progress and review relevant aspects for a successful introduction of electric freight vehicles (EFV) into the market. Austrian pilot projects on EFV are used to exchange barriers and solution approaches in an international context, especially with regard to substitution potential, costs and energy consumption. Together with incentive systems for the market launch of EFV, this will be discussed with logistics companies, the ministry (BMK) and research institutions.
IEA DHC Annex XIII Project 02: MEMPHIS 2.0 - Advanced algorithm for spatial identification, evaluation of temporal availability and economic assessment of waste heat sources and their local representation
The identification and integration of waste heat sources is a key measure towards the decarbonisation district heating networks (DHN). Aim of MEMPHIS 2 is to develop an improved algorithm for identification of different current and future waste heat sources; including time relations of the heat emitted and techno-economic details as well as the further development of the online waste heat explorer.