IEA Tasks & Annexes Topics
There are 138 results.
IEA HEV TCP Task 40: Critical Raw Materials for Electric Vehicles
The production of electric vehicles and batteries requires critical raw materials. In Task 40, demand and supply are compared, based on global scenarios of the development of electric vehicle fleets, battery technologies, primary and secondary raw material potentials and recycling technologies. Potential overall ecological and social impacts of raw material and battery production are assessed.
IEA ES Task 36: Carnot Batteries
Carnot Batteries are an emerging technology for the inexpensive and site-independent storage of electric energy at medium to large scale (> 1.000 MWh). The technology transforms electricity into thermal energy, stores it in inexpensive media such as water or molten salt and transforms the thermal energy back to electricity as required. Carnot Batteries have the potential to solve the global storage problem of renewable electricity in a more economic and ecologic way than conventional batteries.
IEA Experts Group "R&D Priority Setting and Evaluation" (EGRD) - Working period 2017 - 2019
The IEA Experts Group (EGRD) was established by the Committee on Energy Research and Technology (CERT). It examines analytical approaches to energy technologies, policies, and research and development and evaluates the benefits of RTI policies. Its results and recommendations feed into IEA analysis, and enable a broad perspective of energy technology issues.
IEA 4E: Annex Electric Motor Systems. Working period 2019 - 2021
The goal of the Annex Electric Motor Systems is to raise awareness on the large savings potential in motor systems, while showing the realization method of such a path. After publishing the policy and audit guidelines for motor systems Austria leads the task „New Industrial Developments and Digitalization in Motor Systems“.
IEA ISGAN Working Group 9: Flexibility Markets - Development and Implementation (Working Period 2021 - 2023)
ISGAN Working Group 9 focuses on flexibilities in the power system and related market mechanisms. Main work areas include the integration of trading with flexibilities (redispatch), investigation of the needs of different market participants, identification and definition of flexibilities and their characteristics, development and scaling of interoperable flexibility markets, consumer-oriented understanding of flexibilities and the avoidance of stability or security losses due to diversity loss.
IEA 4E Annex: Electric Motor Systems Task 3: New Industrial Developments and Digitalisation (Working period 2021 - 2024)
In Task 3 of the Electric Motor Systems Annex "New Industrial Developments and Digitalisation", the development of technical and political recommendations for the use of digital technologies for increased energy efficiency in electric motor systems is planned. For this purpose, industrial use cases will be described, user interviews conducted and policy instruments analysed.
IEA AMF Task 63: Sustainable Aviation Fuels (SAF) (Working period 2021 - 2023)
Sustainable aviation fuels can reduce aviation GHG emissions. However, this potential remains largely untapped as such fuels currently account for only 0.1% of total aviation fuel consumption. The aim of the task was to lay the foundation for joint R&D work and facilitate the introduction of sustainable aviation fuels by identifying stakeholders, assessing national situations and sharing information.
IEA HEV Task 41: Electric Freight Vehicles (Working period 2021 - 2022)
So far, the transformation of freight transport remains one of the biggest challenges on the path to zero emission. The Task's main objectives are to monitor progress and review relevant aspects for a successful introduction of electric freight vehicles (EFV) into the market. Austrian pilot projects on EFV are used to exchange barriers and solution approaches in an international context, especially with regard to substitution potential, costs and energy consumption. Together with incentive systems for the market launch of EFV, this will be discussed with logistics companies, the ministry (BMK) and research institutions.
Visualisation of IEA TCPs 2020
International activities for the energy supply of the future are taking place within the framework of IEA's technology cooperation. Visualisations based on a graph database show the extensive activities of the individual technology cooperation programmes (TCPs). The collaborations of countries on individual topics were made clearly visible, too.
IEA IETS Annex 11: Industrial Biorefineries (Working period 2020-2022)
With the increasing market share of bio-based products, the concepts of circular economy are highly relevant for the industry. In this context, biorefineries have established themselves as an explicitly integrative, multi-functional overall concept and essential hub in the use of biomass as a raw material source for the sustainable production of various (intermediate) products (chemicals, valuable materials, energy carriers).
IEA AFC Annex 35: Fuel cells for portable applications (Working period 2020 - 2023)
The aim of Annex 35 is the information exchange on the status and new developments of portable fuel cell systems and comprises the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units. In addition, the setup and configuration of hybridized systems and the key topics of secure operation, codes and standards are of interest.
IEA IETS Annex 18: Digitalization, artificial intelligence and related technologies for energy efficiency and reduction of GHG emissions in industry (Working period 2020 - 2023)
The work in Task 18 enables the exchange of experience and knowledge between industry and research institutions from different countries. Through this cooperation best practices are identified and disseminated to promote the implementation of energy-efficient technologies in industry. In the medium and long-term, this contributes to reduce energy consumption and greenhouse gas emissions of industry.
IEA DHC Annex TS4: Digitalisation of District Heating and Cooling
The aim of the IEA DHC Annex TS4 is to identify the possibilities of digitalization and the integration of digital process for district heating and cooling. To this end, the Annex TS4 establishes a platform for industrial and scientific experts to strengthen international cooperation and networking and the exchange of experience of national research and development activities.
IEA ISGAN Annex 7: Smart Grid Transitions (Working period 2020-2023)
ISGAN Annex 7 aims to bundle international experience and interdisciplinary research activities on smart grids, to synthesize them and to make them usable for policy makers. These include social, economic and humanities research on institutional framework conditions of transition, in particular on governance issues, as well as the development of processes for the broad participation of relevant stakeholders in smart grids transition processes.
IEA UsersTCP: “Empowering all” Gender in policy and implementation for achieving transitions to sustainable energy (Working period 2020-2022)
The Annex supports the design of a more efficient and inclusive energy system by integrating gender perspectives. Based on case studies and best practice examples, country-specific recommendations for inclusive energy policies are being elaborated.
IEA ISGAN Annex 6: Electricity Transmission and Distribution Systems (working period 2021-2022)
ISGAN Annex 6 deals with the possible system-related challenges in the development of future smart grids. Austria is leading Task 4 Interaction of Transmission and Distribution Networks. The main topic in the work program relates to flexibility topologies within transmission and distribution grids. The results and analyses had been published on the one hand in a discussion paper and in condensed form in a video. Communication and dissemination activities were targeted and conducted to different stakeholder groups.
IEA HPT Annex 48: Industrial Heat Pumps, Second Phase
Industrial heat pumps enable the use of waste heat and increase the energy efficiency of industrial processes. The aim of this project was to provide comprehensive information on the successful application of industrial heat pumps and thus contribute to the further dissemination of this technology.
IEA IETS Annex 17: Membrane processes in biorefineries (Working period 2020 - 2022)
The aim of IEA IETS Task 17 was to network and strengthen the Austrian membrane and biorefinery research landscape and to promote international exchange on energy- and cost-efficient separation technologies such as membrane distillation (MD), forward osmosis (FO), pervaporation (PV) and liquid membrane permeation (FMP) for the optimised use of lignocellulosic material in biorefineries. A guideline for the integration of emerging membrane processes was created for this purpose.
IEA Wind Task 41: Enabling Wind to Contribute to a Distributed Energy Future (Working period 2019 - 2023)
IEA Wind Task 41 aims to create framework conditions for decentralised small and medium-sized wind turbines in order to establish them as a competitive and reliable technology for decentralised energy generation. A strategic focus in the pursuit of this goal is the revision of the IEC standard for wind turbines, taking into account the latest research results.
IEA-PVPS Task 13: Performance, Operation and Reliability of Photovoltaic Systems (Working period 2018 - 2021)
The IEA Task 13 develops independent, internationally valid analyses and recommendations for the operation and reliability of PV systems and their components. The continuation of the Austrian participation ensures the flow of information back to the Austrian photovoltaic industry through international cooperation and strengthens Austria as a location for innovation and production.