Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
OptiMAS - Optimization of building energy efficiency through model-based energy flow analysis with non-invasive sensors
Using a model-based energy flow analysis supported by non-invasive sensor technologies OptiMAS investigated how to monitor, analyze and optimize existing buildings independent of the installed HVAC systems and automation components. With the OptiMAS approach the optimization potential of individual buildings up to entire areas can be detected, located and tapped by adjustment of system parameters to ensure highest energy and resource efficiency.
Possibilities of urban high-rise multi-storey buildings in a timber-frame method with target course eight or more floors
Research of urban high-rise multi-storey buildings in a timber-frame construction method. Fundamental clarification of the feasibility in relation to the supporting structure, fire prevention and security. SWOT analysis as well as economic, ecological research concerning sustainable design.
Development of a "Light Well" for daylight transparent, highly energy-efficient, multi-story buildings
Daylight supply of multi-story buildings with the help of rooflight openings. Reflecting vertical ducts transport light down to the lowermost floor. The idea promises new building structures with daylight transparency and high energy-efficiency that have a minimal demand of artificial light and cooling at optimal comfort.
OptoControl - Modern sensor systems for energy conservation in buildings
The necessary efficiency of modern energy-self-sufficient buildings can only be achieved with intelligent control of the key parameters. The main focus of the project is the adaptation of optical sensor concepts for application in building technology. The future goal of the project is to supply the modern energy-plus-house with an appropriate and intelligent control device to minimize energy loss.
URBAN STRAW - Fire protection conditioning of blow-in straw insulation material and its structural application for urban building classes 4 and 5
Investigation and development of fire protection conditioning of chopped straw blow-in insulation based on biogenic flame-retardants of similar building materials and their application methods. Use of the material as external thermal insulation in material-reduced prefab timber construction elements for urban building classes 4 and 5 up to 6 storeys.
BIMSavesEnergy - BIM-based planning-methods for the assurance of energy-efficiency in the building process
The Building Information Model (BIM) brings about fundamental changes in the planning and construction of buildings, as the common base makes it possible to work closely together across disciplines in construction projects. In this project, BIM-based planning methods were developed, which make the influence of planning decisions on energy efficiency quantifiable and controllable in the management process.
MOTIVE – Modeling, Optimizing, and technical integration of Vacuum-Glazing-Elements
This project addressed the development of construction details for the implementation of vacuum glazing panels in new windows. In this project such constructions (form of frame, thermal bridges, structural aspects, mounting of glass) were explored via empirical experiments and via simulation. As an outcome, a mock-up was constructed, and the findings were documented in a comprehensive document.
Photonic Cooling – Efficient cooling of buildings through the use of photonic
Within the scope of the project a photonic cooling approach was investigated and evaluated in terms of feasibility and cost efficiency for building applications. In particular cost-efficient photonic surfaces and concepts were investigated which need to have a high reflectivity in of the incident solar radiation (>97%) and a high emission coefficient within the spectral range of 8 – 13 micrometer in order to enable the emission of heat into the sky.
Development of affordable building equipment and services for future "Energy Plus houses" (Plus-Hybrid)
"Plus-Hybrid" integrates knowledge and experience from current activities and complement them by adopting a holistic approach, considering the intelligent interconnection of components as well as managing the planned efforts and human resources in time. The goal of this project was to develop affordable building equipment and services for future "Energy Plus houses".
Cool Windows - Windows with shading optimising the trade-off between summery overheating, wintery heat protection and adequate illumination
Windows with their associated components such as sun and glare protection are optimised as a holistic building equipment unit regarding different seasonal requirements in light of the climate crisis. The results serve as a basis for new developments in the window and shading technology in order to provide summery and wintery heat protection as well as adequate natural illumination over the year.
HotCity - Gamification as a possibility to generate data for energy-oriented neighbourhood planning
The aim of the project was a functional test to determine whether an up-to-date data set of energy-oriented data can be collected for neighbourhood planning through gamification, cost-efficiently, quickly and reliably. This had been determined using the example of the potential determination of industrial and commercial waste heat sources in Vienna and Graz.
Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)
Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.
The Green Parking Space – Utilization of urban parking areas for production of biomass
Many traffic areas in urban environments are actually used as such only a small fraction of the time. Subject of this project was to investigate the possibility of using those areas by additional integration of photobioreactors for the production of biomass, integrating such systems to the maximum extent into the urban substance and energy cycles.
Wall systems made of renewable resources
Testing and optimising post and beam straw bale constructions Testing the thermal insulation (specific heat conductance) and fire resistance of a construction (combustibility grading period), optimisation of building junction elements, development of a mobile testing lab for efficient and effective quality management
ThinkHome: Improved energy efficiency based on artificial intelligence in future homes
ThinkHome is a networked controlled home of the future with the ultimate goal to optimise energy efficiency and user comfort at the same time. On this way, smart interaction between all building services is of utmost importance. Goals of this project include the definition of a comprehensive knowledge base that holds all relevant building data, the evaluation of control strategies based on artificial intelligence and machine learning, as well as agent based software engineering.
GameOpSys - Gamification for optimizing the energy consumption of buildings and higher-level systems
The central goal is the development of a mobile application that enables the energy optimization and planning of buildings, neighborhoods and higher-level energy systems through the participation of the user and the user as a new source of data and information. The development of the application is strongly transdisciplinary and integrates mathematical methods of simulation and optimization as well as psychological aspects of user behavior in order to develop new business models and open up new markets.
Potential and concepts for waste water heat recovery in combination with solar collectors and heat pumps (WRGpot)
The objective of the project is to find possibilities for the reduction of heat demand for hot water preparation of low energy and passive house buildings, in order to advance a further step into the direction of plus-energy buildings.
metaTGA - Metadata and process models for open BIM in building service engineering
The objective of this research project is to design a methodology for developing data and process models and to apply them by modelling selected MEP systems. A particular but not exclusive focus is put on the renewable heating technologies, e.g. heat pumps, solar heat and biomass as well as ventilation systems. The data and process models developed in this research project will be scientifically evaluated in two pilot projects. The models, the approaches taken during development and the project team’s experiences with the pilot application of the models will be disseminated openly.
RAARA - Residential Area Augmented Reality Acoustics
Populations with high exposure to noise emissions will generally agree: Noise means trouble. The aim of project RAARA is to develop a simple, intuitive albeit accurate method for reducing noise imissions in urban areas. This method involves placing a noise-source into its planned real-world destination prior to actual installation, by means of augmented reality. The ensuing sound-imissions are then made tangible by means of sound effects and coloured visualizations. This exceptional approach will facilitate planning for heating and cooling devices and thus reduce noise pollution in urban areas. This, in turn, can contribute to an increase in societal acceptance and investment in renewable energy.
MODESTORE - Modular High Energy Density Sorption Heat Storage
Seasonal storage of solar heat for use in low energy and passive houses (new buildings as well as old buildings).