Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
Plus-Energy-Campus - Energy-flexible Positive Energy District with "Living Lab"
The project explored paths to a sustainable, future-proof Positive Energy-District (PED) in the area surrounding the location of the University of Applied Sciences Vienna (FH-Technikum Wien). The feasibility of a new university building as a Plus-Energy teaching building had been examined in detail to prepare its implementation. Central innovation contents are the energetic flexibilization of the new building and the quarter as well as the conception of the Plus-Energy building as a "Living Lab".
Villab – Exploration of a Villach innovation laboratory for the cooperative development of sustainable neighbourhoods
The "Villab - Probe" project serves to check the feasibility of an urban innovation laboratory to accelerate the transformation of Villach districts towards climate neutrality. Assuming positive feasibility, the cooperation with relevant stakeholders will be deepened and a business plan drawn up for a future innovation laboratory.
OPEN HEAT GRID - Open Heat Grids in urban hybrid systems
The primary research topic of OPEN HEAT GRID was to investigate the possibilities of enforcing the feed-in of industrial waste heat into existing district heating networks. The project results show that excess heat is not for free: despite minimal variable costs, the investment costs need to satisfy usual payback periods. The analysis shows that there is no need for a regulation in the sense of a feed-in obligation or market liberalization. However, from an economic point of view, information asymmetries exist, which may lead to irrational decisions.
Site certificate
Possibilities and requirements of transferring the Swiss “2000-Watt Site” certificate to Austria
PV4residents – Innovative Finance Service and Business Model for PV Power Plants of Multiple Dwellings with On-site Use of Electricity
The aim is to develop a business model, which enables a stronger penetration of PV plants on multiple dwellings with self-consumption of produced electricity by the residents. Involvement of the municipality allows to deliver surplus electricity for their needs. Basis of the business model is an analysis of the technical, legal, administrative, user related and economic barriers with participation of stakeholders and to identify best practice solutions.
Integration of decentralised renewable energies in existing fossil district heating grids
Analysis of potentials as well as technical / economical and organisational solutions to integrate decentralised heating power production from renewables into existing fossil heating grids.
Energy2POG - Hybrid Energy Cluster Pogusch - Renewable energies and cost-efficient operation
The aim of the project was the design, optimisation and demonstration of a hybrid energy supply system as well as optimised material flows for a restaurant and hotel business in an exposed location. The concept allows the integration of material flows into the heat and energy supply system.
see-it - Camera based, user centric daylight control system for optimized working conditions
In the project technologies in the field of building construction and building automation are being researched for quality and performance improvements in the workplace. The aim is to individualize the control of sun protection to the people who need to be protected from glare and overheating and hope to see through.
NNATT - Sustainable use of excavated materials from civil engineering and tunnelling using sensor-based technologies
The holistic system developed in the NNATT project for the sustainable utilisation of excavated materials starts with the geology and extends through the construction process to recycling. With the help of sensor-based real-time analyses and an AI-supported decision matrix, excavated materials are separated and further developed into customised products.
"gugler! build & print triple zero" - subproject 6: Integration of the C2C production into the flagship project Gugler
Print and media production at the media and communications company gugler GmbH are currently being optimized according to Cradle to Cradle (C2C) criteria. The goal of this subproject is to allow the demands of a C2C production process optimized for exchange with biological cycles to be included into the general planning of the new production building of the company, a pilot project within the "building of tomorrow" program line.
OttoWagner-ArealPlus - Feasibility study for a certified plus-energy-district-renovation of the listed Otto-Wagner-Area
Development of an innovative concept for the transformation of the Viennese Otto-Wagner-Area into a plus-energy-quartier while meeting requirements of cultural heritage management. The historic architectural jewel covers an area of around 50 hectares, consists of 70 buildings and a gross floor area of around 200,000 m². The solution meets highest energy efficiency standards and comfort requirements.
e80^3-Buildings - Sub project 1: Basics
Goal of this subproject was to select the building with the highest potential within a building-portfolio. Therefore a criteria catalogue was developed, which is generally applicable.
DigitalFindetStadt - Platform for digital innovations in the building sector
"Digital Findet Stadt" strengthens the digital innovation power of the Austrian building sector and thus contributes to a significant increase in resource, energy and cost efficiency.
Guideline for logistic systems and resource management for renewable resources in Burgenland
The project on hand is applied in the Austrian federal state Burgenland. It investigates possibilities to cover the future biomass demand of the county with resources from the county.
Sani60ies - Demonstration of minimally invasive thermal and energetic refurbishment of classic 1950s and 1960s apartment buildings
System development of a façade-integrated building component activation for "warm" refurbishments with high transfer potential to buildings of classic apartment complexes from the 1950s and 1960s. The system is being tested and further developed based on three building projects and demonstrated through broad application (over 200 flats).
LOW TECH innovation-lab - real laboratory for the transformation to climate and resource-saving energy regions with innovative LOW TECH solutions
LOW TECH innovation-lab aims to set up an innovation laboratory in which innovative model solutions are developed, tested and widely rolled out in cooperation with suitable pilot regions on the basis of an optimized approach with regard to the use of technology on the one hand and the potential of the circular economy, local environmental resources and social innovations on the other.
Move2Grid – Implementation of regional energy-supply-concepts by hybrid coupling
Based on the results of the national-funded exploratory projects called “Smart Exergy Leoben”, and “Energy Sponge Bruck”, the present implementation project aims at analysing how local, renewable resources support the supply of electric mobility in Leoben in the long term and to integrate it into the municipal distribution grid in a good economic sense.
ecoRegeneration: Development of a "Merit-Order" in order to assess regeneration heat for geothermal probes within urban residential neighbourhoods
In urban residential areas there are not enough active-cooled usages, to use the waste heat of the cooling process as required regeneration heat for geothermal probes; free cooling of the apartments is not sufficient. The project is developing various options (waste heat from commercial uses in the ground floor zones of residential buildings, by using waste heat of data centres, additional installation of heat generation systems for regeneration) within the urban settlement area, business models and is calculating life-cycle-costs of all solutions. The result should be a kind of "merit order" for regeneration heat.
Plan4.Energy – methodological set for the planning support of positive energy districts
Plan4.Energy develops a set of methods to support the planning of positive energy districts. The data-based system integration will enable a user-friendly quantitative assessment of the possibilities for building a positive energy district. This will allow stakeholders without the relevant background knowledge to realistically assess different project variants.
The Box - Thermal High Performance Decoupling - Next Generation Thermal Break Technology
The project pursues the overall strategic objective "solution of the problem-inducing heat bridge". For this purpose, the thermal bridging losses should be reduced by the factor of 15 in contrast to the state of the art. The significant increase in efficiency should rely on existing system solutions, but incorporating a new holistic view in terms of construction, geometry and materials.