Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
IEA EBC Annex 72: Assessing life cycle related environmental impacts caused by buildings
The construction sector has great potential to reduce its energy consumption and the associated environmental impacts. Therefore. the IEA EBC Annex 72 focuses on the harmonization of methods for the assessment of construction-specific and operational environmental impacts (primary energy requirements, greenhouse gas emissions and otherindicators) throughout the life cycle of buildings.
IEA EBC Annex 61 - Business and Technical Concepts for Deep Energy Retrofit of Public Buildings
Target of IEA EBC Annex 61 was the development of technical and economical concepts for Deep Energy Retrofit of public buildings. To force high-quality and energy efficient retrofit, besides the enhancement and dissemination of innovative, technical retrofit concepts, the focus was in the development of innovative business models (energy-contracting).
IEA EBC Annex 67: Energy Flexible Buildings (working period 2015 - 2019)
The project increased the knowledge on building Energy Flexibility and the regarding potential buildings can provide to energy grids. The critical aspects and possible solutions to utilize the Energy Flexibility that buildings can provide were identified and a report of the “Principles of Energy Flexible Buildings” will be published in 2019.
IEA HEV TCP Task 40: Critical Raw Materials for Electric Vehicles
The production of electric vehicles and batteries requires critical raw materials. In Task 40, demand and supply are compared, based on global scenarios of the development of electric vehicle fleets, battery technologies, primary and secondary raw material potentials and recycling technologies. Potential overall ecological and social impacts of raw material and battery production are assessed.
IEA HEV TCP Task 49: Electric Vehicle-Fire Safety
As the number of electric vehicles increases, so does the need for safety. The project is creating an overview of fire safety standards for electric vehicles and networking relevant stakeholders. Challenges are discussed and experiences exchanged in national and international expert workshops. The focus is on promoting the safety of electric vehicles and increasing their acceptance.
IEA DHC Annex TS2 webinar: Decreasing district heating return temperatures - How to identify critical substations
04. December 2019
Webinar, AT
In this Webinar, we will present measures to decrease return temperatures in substations and methods to identify where to apply them in order to maximize the impact on the entire system. Results for the network at TU Darmstadt Campus Lichtwiese will be shown as an example.
Digital Twin of a Dynamic Hardware Emulator: Challenges and Opportunities
6. December 2022
Online, AT
To meet the new challenges and maintain the reliability of the electrical grid with increasing share of static generation, innovative solutions are required. This lecture will present digital twin development challenges and opportunities of a dynamic hardware emulator that can be used for controller hardware in the loop (CHIL) testing.
IEA HPP Annex 47: Heat Pumps in District Heating and Cooling Systems
A significant use of alternative heat sources with the help of district heating and cooling networks is a major challenge for a sustainable energy supply. In times of increasing shares of fluctuating producers such as PV and wind energy, the relevance of heat pumps increases. Within the framework of the IEA HPT Annex 47, potentials and barriers for the integration of heat pumps in DHC networks were analyzed.
Webinar: Indicators to Assess Resilience of Cooling in Buildings
10. May 2022
Online, AT
Well-insulated and air-tight buildings are known to be vulnerable to overheating. An increase in the severity and duration of heatwaves is expected, resulting in more severe overheating risks, affecting on their turn the health and mortality of building users. To achieve more future-proof buildings, it is crucial to design buildings that are "resilient" to overheating in future climate conditions.
IEA HPP Annex 33: Compact heat exchangers for heat pumping equipment
International cooperation aiming at widening the use of compact heat exchangers in heat pumping equipment. The goal of this project is to identify compact heat exchangers, either existing or under development, that may be applied in heat pumping equipment such as compression or absorption heat pumps.
IEA EBC Annex 80: Resilient Cooling for Residential and Small Non-Residential Buildings
The rapidly increasing cooling demand for buildings - internationally as well as in Austria - requires further development and application of low energy and low carbon cooling solutions on a large scale. The Annex 80 is meeting this challenge boosting the development and implementation of appropriate cooling solutions by transferring knowledge and coordinating international research endeavours.
IEA EBC Annex 68: Indoor Air Quality Design and Control in Low Energy Residential Buildings
In this project, the scientific basis and data for a coupled calculation and evaluation of indoor air quality and energy efficiency of residential buildings were developed. Assessment metrics and detailed air pollutant models were developed and integrated into the building simulation to derive guidance for the planning and operation of energy-efficient residential buildings.
IEA EBC Annex 84: Demand Management of Buildings in Thermal Networks
The concept of demand-side management (DSM) in buildings to reduce peak loads in the grid is well established in the power sector. The same concept can be applied to shift thermal loads in buildings connected to thermal networks. This project addresses the topic of demand response in buildings, focusing on the collection of case studies, technologies and collaboration models.
IEA ES Annex 39: Large Thermal Energy Storages for District Heating
Large-scale heat storage systems will play a central role in increasing the necessary flexibility of district heating networks and enable the further expansion of renewable energies. The main objective of the Annex is to determine the aspects that are important in planning, decision-making and implementing large thermal energy storages for integration into district heating systems and for industrial processes, given the boundary conditions for different locations and different system configurations.
IEA HPT Annex 54: Heat pump systems with low GWP refrigerants
The aim of the project was to investigate the current situation in the area of refrigerants with a low global warming potential ("low-GWP"). The focus of the national project lies on the current refrigerant application situation and on an outlook until 2030 on the availability of components and systems.
IEA-ISGAN Annex 1: Global Smart Grid Inventory IEA-ISGAN and Annex 2: Smart Grid Case Studies
The international Smart Grid Action Network (ISGAN) aims to improve the understanding of Smart-Grid-technologies and to accelerate global deployment. The work in ISGAN is structured in eight standing working groups (annexes). The present project describes the Austrian contribution to Annex 1: Smart Grids Inventory and Annex 2: Smart Grids Case Studies.
IEA EBC Annex 62: Ventilative Cooling
The main goal of the Annex 62 is to make ventilative cooling an attractive and energy efficient cooling solution to avoid overheating in buildings. Ventilation is already present in buildings through mechanical and/or natural systems and it can remove excess heat gains as well as increase air velocities to widen the thermal comfort range. The results from the Annex facilitate better possibilities for both design purposes and for energy performance calculation.
IEA EBC Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings
IEA EBC Annex 89 focuses on the pathways and actions needed by various stakeholders and decision-makers to implement whole life cycle based net-zero greenhouse gas (GHG) emissions from buildings in policy and practice. Annex 89 will support key stakeholders and decision-makers in developing and implementing effective Paris-goal compatible schemes and solutions to achieve NetZ-WLC buildings at multiple scales.
IEA EBC Annex 86: Energy Efficient Indoor Air Quality Management in Residential Buildings
Residential buildings should be able to provide good indoor air quality while ensuring high comfort and low energy use at lowest possible cost. This project will develop methods and compile data to evaluate different indoor air quality management strategies. Furthermore, innovative control strategies will be evaluated and tested in order to develop concrete recommendations for possible implementations of innovative ventilation systems for residential buildings.
IEA EBC Annex 91: Open BIM for Energy Efficient Buildings
Building Information Modeling (BIM) is considered a key technology for optimising the overall energy performance of buildings. The project lays the foundations for OpenBIM tools to include the assessment and optimisation of the energy efficiency of buildings in the future, for Open BIM processes and data models to be increasingly harmonised and standardised, and thus for smaller construction companies to have the opportunity to work on complex BIM projects in the future.