There are 22 results.
Contracting Platform for SME´s
Evaluation of requirements and framework conditions for the implementation and the operation of a Contracting Platform for SME´s in Austria for the cost efficient identification and realisation of energy efficiency measures.
Development of agitation systems in biogas plants in order to optimize mixing-behaviour and to reduce energy demand with the help of Computational Fluid Dynamics (CFD) simulation
The purpose of this project is the investigation of the mixing-behaviour and performance of the agitation systems in biogas plants, and to present them through Computational Fluid Dynamics (CFD) simulation. This EDP-tool can model and predict the actual fluid dynamics in a closed system. Thus it may help to plan optimal reactor geometries, position and combination of agitation systems as well as to minimize the energy requirements.
Development of an innovative service system to increase the efficiency of public street lighting in municipalities.
The aim is to develope a innovative street lighting service system in order to increase energy efficiency: quick-checks.energy monitoring.best-practise-catalogue.benchmarking.excursions.information.training.info-point.attendant process.congress.preparation efficient street lighting model region
Electrical peak load in supermarkets - Strategies to improve energy efficiency
Levelling and reduction of electrical peak load in supermarkets by using additional energy storage systems and by managing the consumption of industrial refrigeration facicilties. Techno - economic feasibility study with high potential of replications via involved industrial partners.
Energy Counselling within 60 Minutes
Concept for a high quality, PC supported, 60 minutes energy counselling method, focusing on building refurbishment and new constructions, including a software tested in real counselling situations and a printed documentation.
Energy Performance Contracting (IEA DSM Implementing Agreement - Task X)
The objective of this task within the IEA DSM programme is to facilitate the use of performance contracts and other energy service company (ESCO) contracts. In this scenario, the ESCO has taken on the project's performance risk by guaranteeing a specified level of energy savings. Its compensation for this risk is directly tied to achieving savings. The financing for such a project could come from the ESCO, the equipment supplier or a third-party company.
Energy Services as an Integral Part of the Distribution
Concept development for the implementation of efficient energy services as part of grid connected energy supply to increase energy end-use efficiency.
Energy services for the optimised summer utilization of district heating systems
Development of practicable energy services for the summer utilization of district heating systems with reference to existing technologies to improve the efficiency and potentialities for the integration of renewable energy.
Feasibility study of innovative absorption heat pump processes
A feasibility study of innovative absorption heat pump processes for strategic orientation and further development of heat pumping technology and its applications.
IEA HPP Annex 28: Test procedure and seasonal performance calculation for residential heat pumps
Test procedure and seasonal performance calculation for residential heat pumps with combined space heating and heating of tap water - IEA Heat Pump Program Annex 28
Innovative energy services in the sector trade and industry
Systematic reduction of THG in the sector trade and industry through market economical energy services. Research project to improve the energy efficiency of the end user as well as the integration and utilization of renewable energy in the energy service models.
Integral Resource Optimisation Network - Concept
An integral control network for optimizing the resource "electrical energy". Concept for new, innovative services for the power market based on the latest advances in the field of modern information- and communication technologies.
Passivhauswohnen³: Facility Management for Residential Property Developers: A Key to Optimizing the Reduction of Energy and Operation Costs
What soon will be considered "standard" in ecological building must be carried out by the property developer and accepted by the future user. Therefore, in order to assist a smooth implementation of the new passive housing technique and begin the corresponding feedback mechanisms, a specific KMU "quality and incentive model" should be launched. The interrelationship of this model is designed with the property developer as well as the user in mind and aims for lasting "behavior modification" in energy and operational expense consumption.
RETRAIN - Training Network Renewable and Energy Efficiency Technologies in Buildings
The project aim on one hand is to evaluate and adapt current trainings in the field of biomass, solar thermal energy, photovoltaic, heat pumps and ventilation and on the other hand to define new potential trainings in case of further demand. This shall be a fundamental basis to prevent the threat of the absence of professionals and to increase the quality of already converted projects.
Refrigerating plants in hotel and catering industry
To the frequent uses of refrigerating plants in hotel and catering industry was not paid a lot of attention in the way of energy efficiency so far. We are talking about plug-in cooling units and custom-made cooling equipment. Aim of the project: finding out the manner and amount of refrigeration usage, as well as the estimation of energy savings potential and measures, especially for custom-made cooling equipment.
Saving energy with "single-family house contracting"
Saving energy with "single-family house contracting": developing of standardized modules for energy saving measures, evaluation methods for proving the quality of the measures, model contracts and marketing-strategies.
Self-discharge mechanisms in the vanadium redox battery
The Vanadium Redox Battery is an attractive solution to uninterrupted power supply applications. The battery is very robust and easy to use and an overall efficieny of >85% would be achieveable under conditions when self-discharge is minimized.
Smart Metering consumption
The project Smart Metering consumption focused on the energy consumption of the future smart metering infrastructure - an issue not widely discussed until now.
Strategic optimisation of the regulation of air moisture through ventilation systems to reduce energy demand for humidifiers and dehumidifiers
For the validation of coupled room and building component simulations, an analytical solution of this unsteady problem was developed. Finally, a simplified method for determining the humidification and dehumidification demands considering a room's effective moisture capacity was developed.
Sustainable product service for raising the energy efficiency of injection moulding machines for plastics
Performing a feasibility study of establishing a sustainable product service for raising the energy efficiency of injection moulding machines for plastics via analysing the basic organizational and technical conditions.