IEA Tasks & Annexe
There are 135 results.
IEA AFC Annex 35: Fuel cells für portable applications (Working period 2014 - 2017)
The aim of Annex 35 of Technology Collaboration Programm on Advanced Fuel Cells of the International Energy Agency (IEA) included information exchange on the status and new developments of portable fuel cell systems such as the direct ethanol fuel cell (DEFC) and the direct borohydride fuel cell (DBFC) and comprised the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units.
IEA PVPS Task 14: High Penetration of PV Systems in Electricity Grids (working period 2010 - 2014)
The main goal of Task 14 is to promote the use of grid-connected PV as an important source in electric power systems at the higher penetration levels that may require additional efforts to integrate dispersed generators. The aim of these efforts is to reduce the technical barriers to achieving high penetration levels of distributed renewable systems.
IEA SHC Task 56: Building Integrated Solar Envelope Systems for HVAC and Lighting
IEA SHC Task 56 focused on the critical analysis, simulation, laboratory testing and onsite monitoring of envelope systems entailing elements that use and/or control incident solar energy. The central task was the integration of HVAC and lighting systems into a building’s Solar Envelope solution through a systemic approach.
IEA-PVPS Task 13: Performance and Reliability of Photovoltaic Systems (working period 2010-2018)
The Task 13 provides a common independent platform whereby quality aspects of PV systems and its components are elaborated and exchanged amongst the stakeholders, and disseminates this knowledge to different market actors.
IEA Wind Task 27: Small Wind Turbines in High Turbulence Sites
To ensure safety, reliability and productivity of small wind turbines (SWT) the experts of IEA Wind Task 27 developed a standard consumer label for small wind turbines. Since 2013 Task 27 is focussing on small wind turbines in high turbulence sites. By actively participating in the IEA Implementing Agreement Wind Energy Task 27, Austria’s stakeholders will become participants in the global small wind network. The establishment of a national working group as well as the organisation of an annual small wind conference in Austria will foster a durable collaboration and provide new impetus to the Austrian Small Wind Community.
IEA Bioenergy Task 39: Commercializing Conventional and Advanced Liquid Biofuels from Biomass. (Working Period 2013 - 2016)
The aim of Task 39 „Liquid Biofuels“ is to provide information and analyses on technology development as well as on policy issues and markets to provide scientific background for political and economical decisions. Task 39 initiated mutual R&D projects, to improve the economics of advanced technologies, to exploit new feedstocks and to gain knowledge for the developments after 2020.
IEA International Smart Grid Action Network (ISGAN) Annex 6 on Power T&D Systems. Working period 2015 - 2016.
The International Smart Grid Action Network (ISGAN) aims in enhancing the knowledge about Smart Grid Technologies and accelerating the development and the international deployment. The main objective of the Austrian contribution in IEA ISGAN Annex 6 is to build up knowledge and long term concepts for the development of an intelligent and integrated electricity system, with the focus on the interaction of distribution and transmission networks, including the lead of the related subtask within the Annex.
IEA ISGAN Annex 6: Power Transmission and Distribution Systems (working period 2017 - 2018)
ISGAN aims at enhancing the knowledge about Smart Grid Technologies and accelerating their international development. The main objective of the Austrian participation in IEA ISGAN Annex 6 is to acquire knowledge and develop long-term concepts for the development of an intelligent electricity system, with the focus on the interaction of distribution and transmission networks.
IEA EBC Annex 70: Building Energy Epidemiology: Analysis of Real Building Energy Use at Scale
Within the framework of the IEA-EBC Annex 70, causes of deviations between calculated and actual energy consumption in buildings were empirically investigated and requirements for data quality, characteristics and security were developed. Furthermore, recommendations were developed regarding the use of internationally uniform standards and methods for data collection, processing and evaluation.
IEA AFC Annex 31: Polymer electrolyte membrane fuel cell (Working period 2017 - 2019)
Task 31 is a research and development oriented Task with the objective to contribute to the identification and development of techniques and materials to reduce the cost and improve the durability of polymer electrolyte fuel cells (PEFCs).
IEA AFC Annex 35: Fuel cells for portable applications (Working period 2017 - 2019)
The aim of Annex 35 is the information exchange on the status and new developments of portable fuel cell systems and comprises the development and manufacture of membrane electrode assemblies (MEAs) all the way through to system components such as electronic converters or gas supply units. In addition the setup and configuration of hybridized systems and the key topics of secure operation, codes and standards are of interest.
IEA FBC Implementing Agreement Fluidized Bed Conversion (working period 2017 - 2020)
The technology programme includes the collaboration, the exchange of relevant information and networking in the area of fluidized bed conversion of fuels applied for clean energy production.
IEA 4E Annex Electronic Devices and Networks Annex - EDNA (working period 2017 – 2019) Task 3: "Intelligent efficiency". Project: "Basket of products testing"
The "Electronic Devices and Networks Annex “EDNA” has emerged from the background of the global increase of electronic devices and digital solutions, which requires the evaluation of the energy efficiency of these devices. Energy efficiency measures should be developed and improved, and technological and regulatory challenges need to be addressed. The aim of EDNA is to develop policy and strategy recommendations for decision-makers, concerning network connected devices.
IEA DSM Task 17 - Extension: Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources and Energy Storages (working period 2013 - 2016)
The aim was to exchange experiences and developments in the field of integrating renewables with the help of DSM in residential and commercial buildings. Technologies like PV systems, electric vehicles, electric storages, heat pumps, micro-CHP in combination with energy management systems (via gateways), and implementing dynamic tariffs using smart meters offer huge potential to increase energy efficiency. Phase 3 of this Task addressed the current role and potential of flexible buildings and their related implied changes and impacts on the grid and markets. The scalability and applicability of successful projects with respect to specific regional differences and requirements was also explored.
IEA Wind Task 27: Small Wind Turbines in High Turbulence Sites (working period 2016 - 2018)
Since 2013 Task 27 is focussing on small wind turbines (SWT) in high turbulence sites. By actively participating in the IEA Implementing Agreement Wind Energy Task 27, Austria’s stakeholders will become participants in the global small wind network. The establishment of a national working group as well as the organisation of an annual small wind conference in Austria will foster a durable collaboration and provide new impetus to the Austrian Small Wind Community.
IEA SHC Task 58/ECES Annex 33: Material and Component Development for Thermal Energy Storage
This Task/Annex addresses second generation materials for PCM and TCM energy storage and includes material development, characterization and testing under application conditions. In addition, the focus was on the interaction between material and storage component and on the expected storage performance of innovative materials.
IEA Wind Task 19: Wind Energy in Cold Climates (working period 2013 - 2015)
The international experts elaborated two guidelines on the current state of wind energy utilization under icing conditions: the "State of the Art Report" and the "Recommended Practices Report". On a national level, Energiewerkstatt compiled a comparative report on international approval procedures with the assessment of icefall risk, a report regarding operational experience with a stand-alone power supply unit as well as a report on the evaluation of different ice detection systems.
IEA AFC Annex 33: Stationary Applications (Working period 2017 - 2019)
The main objective of Annex 33 is to support the technology development of key components and systems. Market implementation and transformation will be supported by the analysis and development of the necessary political framework and instruments. The current technological, economic and political barriers are to be identified, solutions developed and the barriers gradually removed.
IEA SHC Task 55: Integrating Large SHC Systems into DHC Networks
Despite the large potential for integrating large solar thermal plants into district heating and cooling networks, the share of solar heat worldwide is below 1%. The aim of this project was to analyse the technical, economic, and regulatory barriers that hinder a faster market development of such systems, and to propose solutions to support the growing heat market. The results (roadmaps, data, information) are available in the form of fact sheets.
IEA Bioenergy Task 33: Gasification of Biomass and Waste (Working Period 2016 - 2018)
The objectives of Task 33 are to monitor, review and exchange information on biomass and waste gasification research, development, and demonstration and to promote cooperation among the participating countries and industry to eliminate technological impediments to the advancement of thermal gasification of biomass and waste.