Search Results
HPZ-Walls - High-performance exterior brick walls without additional thermal insulation
Sustainable multi-storey housing made of bricks can only be realised if the strength of thermally optimised vertical coring bricks is tripled. This is to be achieved by changing the hole pattern, namely by reducing the air gap from 8 to 4 mm. A success of the project will form the basis for the realisation of insulation-free, 8-storey residential and office buildings in brick construction.
Heat Harvest - Harvest of urban solar excess heat from buildings and surfaces to avoid summer overheating in cities
"Harvest" of solar urban excess heat from building surfaces, sidewalks, streets and squares to avoid urban heat islands by lying flat absorber pipes, which are then fed into geothermal probe storage tanks for later use as a source for heating buildings.
Hook-and-Loop fastener application for the technical building equipment
The aim of this exploration study is to explore a possible systematic change that will allow for a more universal application of Hook-and-Loop (or similar) fasteners in the construction industry, especially in building installation phase.
HotCity - Gamification as a possibility to generate data for energy-oriented neighbourhood planning
The aim of the project was a functional test to determine whether an up-to-date data set of energy-oriented data can be collected for neighbourhood planning through gamification, cost-efficiently, quickly and reliably. This had been determined using the example of the potential determination of industrial and commercial waste heat sources in Vienna and Graz.
Housing 4.0 - digital platform for affordable living
The main aim of this project is the development of an integrated framework for the digital platform "Housing 4.0"; thus supporting integrated planning and project delivery through coupling various digital tools and databases. Thereby, the potentials of BIM for modular, off-site housing assembly in order to improve planning and construction processes, reduce cost and construction time and allow for mass customization will be explored. The novel approach in this project is user-involvement; which has been neglected in recent national and international projects on off-site, modular construction, supported by digital technologies.
INFINITE: INnovative FINancing models for sustaInable urban energy sysTEms
The goal of the INFINITE-project is to lay the foundations for a more wide-spread implementation of urban energy supply systems across buildings, using renewable energy sources produced in local supply units. At the same time the projects supports to reduce the demand for fossil fuels and higher-level energy infrastructure.
INN'FIT4UM - Innsbruck "Fit4UrbanMission" - climate neutral Innsbruck 2030
Cities are the place where decarbonization strategies for energy, transport and buildings intersect. A few years ago, the municipality of Innsbruck set up a Smart City Group consisting of staff from the municipality, IIG, IKB and IVB to address this challenge. The goal of INN'F4UM is to develop a step-by-step plan to achieve climate neutrality for the city by 2030, building on an up-to-date representation of energy and resource flows together with the University of Innsbruck.
INNERGY - Real laboratory in the central Inn-valley for climate-neutral semi-urban areas
Sustainable energy supply solutions for existing quarters and industry had been surveyed holistically and cross-sectorally in a small-structured area, consequently pilot projects had been elaborated with the aim to build up a climate-neutral region.
INReS - Integration of sustainable stormwater management tools into planning execution and management software (BIM)
Exploration to prepare and evaluate the applicability of an interactive web application to recommend appropriate stormwater management measures for existing and new buildings that allows for (1) BIM compatibility for object-based implementation and (2) simplified application in the form of the stormwater toolbox.
Ice-storage NEW - New economical ice storage concept for optimized heat storage using heat pumps and peak use of wind power
Development of a technically and economically optimized new ice-storage concept as a thermal wind power peak storage and to improve the performance of heat pumps as a contribution for peak smoothing of the electrical load profile.
InSite - Monitoring and evaluation of innovative demonstration buildings
In the "Stadt der Zukunft" and "Smart City Initiative" programmes, a large number of demonstration projects have been implemented in recent years. To be able to evaluate the developed innovations in a uniform and comparable form and to make the knowledge gained accessible to implementers, InSite subjects 10 selected objects from these programmes to energy and ecological monitoring as well as sociological surveys over a period of 24 months. The interpreted results are publicly available as a published study and as an interactive online platform.
Indicators for urban areas – for construction, operation and mobility in climate-friendly areas
Development and coordination of indicators for energy and ecological evaluations of urban areas based on the Swiss 2000-Watt certification system. The results will be used for the development of a quality assurance system for urban areas similar to the klimaaktiv declaration for buildings and the e5 certification for communities.
InnoGOK – Investigation of the energetic and ecological usability of solar radiation on urban spaces and paths
Examination of the suitability of street space or other paved or not paved surfaces in urban areas for promoting renewable heat from solar radiation. Thus offers a high potential for increasing energy efficiency and conserving resources in urban contexts. Besides, the dissipation of heat from large solar-heated surfaces promises to prevent urban heat islands.
Innovation lab act4energy
The Innovation Lab act4energy is set up as an innovation laboratory project. Its focus is to solve the problems of renewable energies integration with a focus on photovoltaic power paired with local consumption, linked to the the high fluctuation of renewable energies.
IntEGrity - Integration and Diffusion of Energy Communities
Intensified Density - a small scale densification strategy for the suburbs by using modular construction
The project investigated whether a small scale densification strategy for the suburbs / intermediary cities, using modular construction, and existing infrastructure on empty plots of land, can offer a competing alternative to not only the sprawl of single family dwellings but also to large projects.
Itz Smart – Carbon neutral city district development Itzling – Implementing innovation and technology via co-operative process design
The goal of the project “Itz Smart” is to tie in with existing activities and to consistently develop Itzling as a residential location further. In the test and demonstration area, sustainable residential quarters with trendsetting solutions for mobility are developed in the zone of the transport axis (railway and Schillerstraße) and along the local supply axis (Itzlinger Hauptstraße). The consideration of housing and mobility with regard to the aspect of “city of short ways“ also entails a discussion of determined mixed utilisation and the development of such residential quarters.
IÖB-ENERGY - Public procurement for intelligent urban energy solutions
Assessment of the potential for pre-commercial procurement in the Smart City energy sector in Austria in the areas of innovative building technologies, urban energy systems and systems for urban planning. The results will serve as the basis for recommendations for future priority setting for public procurers.
Joining Cards - Investigation of de-constructable fastening and joining techniques for the development of mono-material interior systems made of cardboard
Strategic examination of cardboard products and paper-based materials for the development of de-constructible interior systems and the definition of building components and their interfaces. The result forms the basis for further research projects in the form of a comprehensive knowledge gain.
KELVIN - Reducing the urban heat island effect via improving the reflective properties of buildings and urban areas
The aim of this project was to estimate the potential to reduce urban heat islands via low-tech measures such as the variation of the surface albedo, using the City of Vienna as an example. The project has also assessed the energy savings and greenhouse gas emission reductions due to the decreased energy demand for cooling as a result of such measures.