Search results

There are 40 results.

Fabrik der Zukunft

Pilot machine for the production of lightweight sandwich-elements in batch mode consisting only of one polymer component.

Further development of a new technology for the production of lightweight sandwich-elements consisting only of one polymer component (for example polypropylene). This pilot machine is the basis to get all the necessary figures and experience for the development of the production machine and to produce the first parts of the car bodies for the zero series.

Fabrik der Zukunft

PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement

Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.

Fabrik der Zukunft

Quantitative and qualitative identification of relevant secondary raw material flows in Austria

In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.

Fabrik der Zukunft

RAILWASTE - Production of railway sleepers by mixed plastic waste (SUSPRISE Joint Call)

Production of railway crossties ("sleepers") from an alternative (renewable) raw material

Fabrik der Zukunft

Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry

This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.

Fabrik der Zukunft

Raising efficiency by an optimized filters purification system using waste heat in metal industry

Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.

Fabrik der Zukunft

Reduction of Broke in Paper Production

Development of a measurement and control system that detects paper deformation during production. Thus, broke is reduced, significant savings in energy use are achieved, and the economic efficiency is well increased.

Fabrik der Zukunft

Repa & Service Mobil

Development/preparation of a mobile repair and service-point and pilot-implementation at large company sites or centres with high customer-frequency. Supporting of sustainable product-services - especially repair-services - in connection with efficient logistical and organisational processes in relation to product-service-systems; reduction of market-barriers and sensitisation of the general public for sustainable consumption.

Fabrik der Zukunft

Resource-saving and sustainable production of high-quality steel by enhanced on-line control of stirring efficiency in vacuum degassing (SUSPRISE Joint Call)

For vacuum degassing of liquid steel, as it is used for production of high quality steel grades, an improved on-line monitoring and control system will be developed and applied. Thus the reliability of the vacuum degassing process will be improved, and simultaneously the consumption of energy and resources will be reduced.

Fabrik der Zukunft

SERECARB - SElective REcovery of Calcium CARBonate in paper sludge (SUSPRISE Joint Call)

Developing a new process based on selective recovery of calcium carbonate from paper mill effluents and sludge, purification, conversion into precipitated calcium carbonate (PCC) and reuse as filler in paper making.

Fabrik der Zukunft

Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities

Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry

Fabrik der Zukunft

THECLA

Fabrik der Zukunft

Thermal detection of cracks on glowing wire during the process of rolling with regard to reduction of rejections

Developing a non-destructive and fully automated testing to detect surface cracks and laps in rolled wires during the production at temperature values of 800-1000°C and at a material speed of 30-40 m/s, with regard to reduction of rejections.

Nachhaltig Wirtschaften

Waste heat utilisation and use of renewable energy sources in a metal-working enterprise

Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.

Nachhaltig Wirtschaften

Wood-processing employing a superimposition of ultrasonic vibrations

Development of wood-processing techniques employing high-frequency ultrasonic vibrations in terms of applications in the woodworking industry.

Fabrik der Zukunft

ZERIA 3 (Zero Emissions Research in Application)

Elaboration of the principles for zero emission enterprises. The results show that this approach can be realistic and economically advantageous in many cases.

Fabrik der Zukunft

ZERMEG - Zero Emission Retrofitting Of Existing Galvanizing Plants

Method to optimize existing galvanizing plants consequently with the goal of zero emission and zero waste enterprises, to minimize operating cost including benchmarks and three case studies

Nachhaltig Wirtschaften

ZERMEG II - Zero emission retrofitting method for existing galvanising plants

ZERMEG II is the follow up project of ZERMEG, which was commissioned after the first call of the Austrian Factory of the Future program in 2001. The project developed a method to revamp existing galvanising plants in order to operate them with a maximum reduction of the use of chemicals and maximum recycling.

Fabrik der Zukunft

ZERMEG III - Decision guidance for the visualisation of the achievements of sustainable corporate strategies

ZERMEG III creates a virtual factory of the future from the combination of the research results of different projects. This model will be used to generate real experience for managers in experimenting taking organisational and technical decisions with regard to a sustainable development.

Fabrik der Zukunft

ZERMET - Zero Emission Retrofitting For Existing Textile Plants

Minimisation of the consumption of water, chemicals and energy in the textile industry. Further development of the ZERMEG approach in the form of a questionnaire and application in the textile industry.