Search Results
ecoRegeneration: Entwicklung einer „Merit-Order“ bei Regenerationswärme für Erdsondenfelder in urbanen Wohngebieten
In urbanen Wohngebieten gibt es zu wenig aktiv-gekühlte Nutzungen, um die Abwärme des Kühlprozesses als erforderlich Regenerationswärme für Erdsondenfelder verwenden zu können; Das Free-Cooling der Wohnungen bietet eine zu geringe Wärmemenge. Das Projekt prüft verschiedene Optionen (Abwärme von Gewerbenutzungen in Erdgeschoßzonen, gezielte Ansiedelung von Datenzentren, zusätzliche Installation von Wärmebereitstellungssystemen) innerhalb des Siedlungsgebietes, erarbeitet Geschäftsmodelle und bewertet den Wärmepreis sämtlicher Lösungen, sodass eine Art „Merit-Order“ für Regenerationswärme erstellt werden kann.
ecoRegeneration: Development of a "Merit-Order" in order to assess regeneration heat for geothermal probes within urban residential neighbourhoods
In urban residential areas there are not enough active-cooled usages, to use the waste heat of the cooling process as required regeneration heat for geothermal probes; free cooling of the apartments is not sufficient. The project is developing various options (waste heat from commercial uses in the ground floor zones of residential buildings, by using waste heat of data centres, additional installation of heat generation systems for regeneration) within the urban settlement area, business models and is calculating life-cycle-costs of all solutions. The result should be a kind of "merit order" for regeneration heat.
Photonic Cooling - Effizientere Gebäudekühlung durch Nutzung von Photonik
In diesem Sondierungsprojekt wurde der Ansatz des Photonic Cooling zur Gebäudekühlung auf seine praktische und kostengünstige Umsetzbarkeit und im Bezug zu seiner Wirkung bewertet. Konkret wurden dabei kostengünstige photonische Oberflächen und Konzepte evaluiert, die möglichst viel solare Strahlung reflektieren (>97%) und die Wärmestrahlung im Bereich zwischen 8 und 13 Mikrometer, als Abstrahlung ins kalte Weltall möglichst nicht behindern. Darauf aufbauend wurden Konzepte zur Gebäudekühlung mittels Photonic Cooling erarbeitet, sowie Modellrechnungen zur möglichen Kühlleistung durchgeführt und deren Auswirkung auf das Stadtklima abgeleitet.
Photonic Cooling – Efficient cooling of buildings through the use of photonic
Within the scope of the project a photonic cooling approach was investigated and evaluated in terms of feasibility and cost efficiency for building applications. In particular cost-efficient photonic surfaces and concepts were investigated which need to have a high reflectivity in of the incident solar radiation (>97%) and a high emission coefficient within the spectral range of 8 – 13 micrometer in order to enable the emission of heat into the sky.
LooPi BETA VERSION. LooPi - das autarke unisex Pflanzen Urinal für den öffentlichen Raum. Beta Version.
Einsatz des Prototyps in Betriebsumgebung über einen Zeitraum von 20 Monaten. Technisches Monitoring über den Jahreszeitenzyklus, sowie NutzerInnenbefragungen zur Zufriedenheit, und Erhebung des möglichen Einsatzes von LooPi-Materialströmen zur Bodenverbesserung im biologischen Landbau. Ergebnisse dienen der Entwicklung zur Marktreife.
LooPi - the autonomous unisex plant-based urinal for public spaces
Application of the prototype in the operational environment for a period of 20 months. Technical monitoring thoughout the cycle of seasons, user interviews concerning satisfaction, evaluation of the potential use of LooPi material streams as soil conditioner for organic farming. Results serve the development towards market maturity.
RCC2 – Reduced Carbon Concrete 2: Ökobilanz heizbarer Schalung für CO2-reduzierten und klimaneutralen Beton
Experimentelle Entwicklung innovativer Rezepturen CO2-reduzierten Betons sowie beheizter Schalung zur Unterstützung der Frühfestigkeitsentwicklung bei winterlichen Temperaturen.
Series
26/2024
T. M. Romm, J. Flaszynska, M. Härtel, M. Kopp, D. Ehrenreich, T. Meinschad, P. Kasal, T. Belazzi, J. Horvath, M. Schwarzbauer, L. Kujawa, R. Pamminger, M. Löffler, F. Denk, H.-J. Zeiler, J. Hörler, J. Roth, A. Preuß, T. Groeneveld
Publisher: BMK
German, 71 pages
Publication Downloads
Hook-and-Loop fastener application for the technical building equipment
The aim of this exploration study is to explore a possible systematic change that will allow for a more universal application of Hook-and-Loop (or similar) fasteners in the construction industry, especially in building installation phase.
"Gasthermenersatz" - Modular aufgebaute Wärmepumpe mit umweltfreundlichem Kältemittel als Gasthermenersatz im großvolumigen Wohnbau
Das Projekt "Gasthermenersatz" zielt darauf ab, ein Funktionsmuster einer dezentralen, schalloptimierten Wärmepumpenlösung mit seriell- oder parallel verschalteten Kältekreis-Modulen zu entwickeln, zu bauen und zu testen. Diese erneuerbare Technologie ist besonders geeignet, um bestehende Gasthermen im großvolumigen Wohnbau zu ersetzen, und damit den Weg zur klimaneutralen Stadt zu ebnen.
"Gasthermenersatz" - Modular heat pump with environmentally friendly refrigerant to replace natural gas-based heating systems in large-scale residential buildings
The project "Gasthermenersatz" aims at developing, manufacturing, and testing a functional prototype of a decentralized, sound-optimized heat pump solution with refrigerant circuit modules connected in series or parallel. This renewable technology is well-suited to replace existing natural gas-based heating systems in large-scale residential buildings and to pave the way to carbon-neutral cities.
The Green Parking Space – Nutzung von städtischen Verkehrsflächen für die Produktion von Biomasse
Zahlreiche Verkehrsflächen im städtischen Umfeld werden nur einen geringen Teil der Zeit tatsächlich genutzt. Inhalt dieses Projekt war, die Möglichkeit zu untersuchen, solche Flächen durch Integration von Photobioreaktoren zusätzlich zur Produktion von Biomasse zu nutzen und die Systeme möglichst vollständig in die urbanen Stoff- und Energiekreisläufe einzubinden.
The Green Parking Space – Utilization of urban parking areas for production of biomass
Many traffic areas in urban environments are actually used as such only a small fraction of the time. Subject of this project was to investigate the possibility of using those areas by additional integration of photobioreactors for the production of biomass, integrating such systems to the maximum extent into the urban substance and energy cycles.
VERTICAL FARMING - Investigation on requirements of a Vertical Farm-prototype development for crop plant production
In the center of interest stands the investigation of fundamental principles for a new building typology – the Vertical Farm. Urban vertical food production can contribute to more energy efficient cities by concurrently reducing land use. Substantial influencing factors to achieve these goals are intended to be revealed.
BIMSavesEnergy - BIM-basierte Planungsmethoden zur Sicherstellung von Energie-effizienz im Bauprozess
Das Building Information Model (BIM) bewirkt grundlegende Veränderungen in Planung und Bau von Gebäuden, da durch die gemeinsame Datenbasis erstmals eine enge, organisationsübergreifende Zusammenarbeit in Bauprojekten möglich wird. In diesem Projekt wurden BIM-basierte Planungsmethoden entwickelt, die den Einfluss von Planungsentscheidungen auf die Energieeffizienz quantitativ bewertbar und im Managementprozess steuerbar machen.
BIMSavesEnergy - BIM-based planning-methods for the assurance of energy-efficiency in the building process
The Building Information Model (BIM) brings about fundamental changes in the planning and construction of buildings, as the common base makes it possible to work closely together across disciplines in construction projects. In this project, BIM-based planning methods were developed, which make the influence of planning decisions on energy efficiency quantifiable and controllable in the management process.
Sondierung für PV-Fassadensysteme aus leichten Kunststoff-Modulen mit reversiblen Befestigungen für Neu- und Altbauten (PV-FAS_light+easy)
Sondierung für ein neues einfaches, kostengünstiges und gebäudeintegrierbares PV-Fassaden-System aus Kunststoff-PV-Modulen durch erste Untersuchungen zur Befestigungstechnik, zur Bauphysik, zum Brandschutz und zur Elektrotechnik um die Gebrauchstauglichkeit, die Anwendbarkeitsbereiche und das Ertrags- und Anwendungspotenzial für den Neubau und für Bestandsgebäude beurteilen zu können.
Probing for PV façade systems made of lightweight plastic modules with reversible fittings for new and old buildings (PV-FAS_light + easy)
Probing for a new, simple, cost-effective and building-integrated PV facade system made of plastic PV modules through initial investigations for fixing technology, for building physics, for fire protection and for electrical engineering concerning the usability, the areas of applicability and the yield and application potentialfor new buildings and for existing buildings.
MehrWertStrom 2030 - PV-Community system - Exploring a participatory pilot project with regional added value for structurally weak regions
The "MehrWertStrom 2030" project analysed the legal, technical, organizational and economic feasibility of PV community joint venture facilities on multi-party buildings including the added value for structurally weak regions and developed innovative solutions related to organization, financing and realization.
RCC – Reduced Carbon Concrete: Implementierung von CO2-reduzierten Betonen auf der Baustelle
Die Ziele des vorliegenden Projekts „RCC – Reduced Carbon Concrete“ war es, das aktuelle Wissen um die temperaturabhängigen Aushärtungsverläufe der Performancebetone durch Betonarbeiten an großen Bauteilen auf der Baustelle, unter sommerlichen und winterlichen Bedingungen, sowie in der Fertigteilproduktion zu erproben. Die Ergebnisse fließen in die Baupraxis und die Normungsarbeit ein.
RCC – Reduced Carbon Concrete: Implementation of CO2-redudes concrete in construction sites
The objectives of the present project "RCC - Reduced Carbon Concrete" were to test the current knowledge about the temperature-dependent curing processes of performance concretes by concrete work on large components on the construction site, under summer and winter conditions, and in precast production. The results will be incorporated into construction practice and standardization work.