Search results
There are 42 results.
Implementation of a cascaded use of stone-fruit residual-mass - Practice-oriented planning for installing a pilot plant for manufacturing marketable products
NAWARO-CASCADING PILOT has investigated professional biocascading strategies for fruit stone utilization (pits from apricots, peaches, cherries and plums) in order to convert them valuable products (novelties like delicacies, cosmetics and technical abrasives) as well as establishing a practice- oriented network.
Increase in Sales of Vegetable Oils from Austrian Oilseeds by Increase of the Technical Grade with Regard to the Demands of the Varnishing Industry
The cultivation of flax (linseed) in Austria should be enhanced by arrangements to increase the technical grade of linseed oil produced. Austrian agriculture should be enabled to provide raw materials sufficient in batch and technical grade for the Austrian varnishing industry.
Innovative technology for the treatment of municipal and industrial waste water and process waters (INNOWATEC)
Evaluation of a technology as a supporting module for process water and waste water treatment and testing in laboratory and pilot tests for specific fields of application in operational water management.
Investigation of the sustainable utilisation of carbon from methane pyrolysis
One of the possible alternative production routes for renewable hydrogen is methane pyrolysis. Compared to other, alternative production routes, methane pyrolysis has the lowest energy input (less than a quarter of water electrolysis) with a very high hydrogen yield.
Material utilization of end-of-term textiles
Mechanical processing of the non-reusable part of collected end-of-life apparels (e.g. cutting, sifting, etc.); development of marketable application for the obtained short fibers in the field of construction materials (e.g. bitumen modification)
Natural Dyes for the Textile Industry
New cooperations between agriculture und industry are necessary to ensure the utilization of renewable materials. The project´s focus is upon natural dyes and their application in textile industry. The goal of the project is to create a contact institution which connects various suppliers of diverse plant materials, takes on the processing, and standardising of the natural dyes, and makes a product that can be used by the industry.
Phytozid - Application of tansy extract and its ingredients as insecticides against the codling moth
Extraction of insecticidal active substances in pilot plant scale from tansy for field trials against the economically important pest codling moth (Cydia pomonella) as well as approval procedure in order to develop alternative strategies for naturally based plant protection.
Pilot machine for the production of lightweight sandwich-elements in batch mode consisting only of one polymer component.
Further development of a new technology for the production of lightweight sandwich-elements consisting only of one polymer component (for example polypropylene). This pilot machine is the basis to get all the necessary figures and experience for the development of the production machine and to produce the first parts of the car bodies for the zero series.
Processing of filter residues of the beer - brewing process for the production of an innovative pharmaceutical substance
The latest technology for the filtration of beer is the use of ion exchangers. The reclaim contains high-potent substances (vitamins and minerals from the yeast, hops and other proteins) in concentrated form which should be processed and characterised. In a further step this substance should be the main ingredient of a food supplement. After a technical adaptation this concept can be used within other ranges of the food and natural substance industry.
Production of bioethanol in addition with heat, power and valuable byproducts
The production of bioethanol in Bruck/Leitha in addition to the production of heat, power and valuable by-products from biomass will be optimized by a new process simulation tool under the target of maximum usage of waste and low temperature heat and optimal source and product usage.
RAINBOW 2
Application and expansion of knowledge gained in the project Rainbow1 for the production of new, functionalised fibres using renewable resources as well as other fibre manufacturing methods in a pilot plant scale production.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
Reprocessing of used goods - A strategy of sustainability and ist impact on the supply chain of a "factory of tomorrow"
Objective is to improve the competitiveness of reprocessing-activities as strategies towards higher resource productivity.The study will analyse the changes of the supply chain necessary to achieve this beyond the Point of Sale with regard to the re-integration of used goods in the supply chain.
SUPROMED: Reprocessing and Reuse of Single Use Medical Devices in the Light of Sustainable Development Criteria - Implementation in Austria
In contrast to other countries there is currently no reprocessing and reuse of single use medical devices in Austria. Thus the potential for major ecological and economical savings remains unused. In a stakeholder dialogue, practical implementation strategies were developed to change the trend towards a sustainable value-added chain.
Solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller
A solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller has been developed. The necessary components were built and tested and finally put together to get an operating pilot plant at the test facility.
The Paper Factory in the Year 2030
Paper factory in the year 2030 as an integrated part of a sustainable economy and a supplier of sustainable paper products fulfilling criteria for sustainability at highest possible level.
The development of fused wood-only parquet elements
The development of the wood fusing technology to an innovative, ecological process of production of wood-only parquet elements, which do not contain any wood foreign substances as glue or thermoplastics.
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.
Watersorption - Water absorption of Wood Plastic Composites
Analysis of the water absorption in Wood Plastic Composites (WPC) in order to develop solutions to decrease and stop water absorption. This enables a big variety of new applications made of WPC and brings economical and ecological advantages for the polymer processing industries.
Wood Plastic Composite - Direct extrusion
Development of a wood composite direct dosing system