Search results
There are 17 results.
De-lacquering as a service
Development of the service of de-lacquering in industrial plants on the basis of pulsed high pressure water with a new, energy efficient high pressure pump. Further possible applications will be searched for and evaluated.
Development of a continuous hydrogen-carbon nanofibers production line
With the development of a hydrogen-carbon nanofiber production in a continuous process carbon nanofibers can be produced in an economic way and at the same time access to environmentally friendly hydrogen is enabled.
Development of criteria for the communication of energy efficiency for classifying plastics processing machines
The aim of this project is the development of a measuring standard for the energy demand and efficiency criteria for classifying plastics processing machines. Based on this a communication instrument for the energy efficiency shall be developed.
Development of miniaturized, ceramic high-temperature fuel-cell-components using resources-perserving mass-production processes
The application of nano scaled powder and powder injection moulding (PIM) for energy efficient co-sintering of miniaturized solid oxid fuel cells which can produce current and heat by using renewable raw materials.
Ecologically friendly resin impregnation of rotating machines with the use of the joule effect
Windings of rotating machines or electrical generators (e. g. wind and water power generators) are impregnated with resin. A new technology using the heating effect of current is investigated. The high efficiency of heating with the joule effect results in quick heating of stator leading to fast gelling of the resin, which implies low emission.
Green Biorefinery - Phase 3: Development of technologies for intensification of process concerning extraction and utilisation of lactic acid, amino acids and gras fibres
Optimisation of downstream processing of a Green Biorefinery for separating lactic acid and amino acids out of silage juice applying chromatography; fundamental test for utilising the fibre fraction for hydro-greening and for horticulture substrate.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Information systems for ecological industry clusters - Case study industrial region Mödling (Lower Austria)
Development of a comprehensive, transparent and user-friendly concept of enhanced interlinkage of material and energy flows through increased information exchange and shows the resulting pollution reducing in conjunction with economic benefits for the companies.
New solvents and processes for post-combustion CO2 capture
New and better solvents for CO2 absorption can reduce the costs of Carbon Capture and Storage significantly. Therefore, the ability to absorb CO2 and the vapour - liquid equilibrium curve of different new solvents will be determined in the laboratory and under real operating conditions at a power plant. Furthermore, the achievable CO2 removal efficiency of spray towers will also be investigated for different solvents.
Pilot-Biogas plant consisting of prefabricated units
Construction of a biogas tank built of prefabricated reinforced concrete elements, erected and operated at an existing biogas plant in Bruck an der Leitha. The precast concrete technology promised a lot of advantages but also posed a lot of questions that had to be solved. These problems considered especially the sealing method and the general construction with precast concrete elements.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Raising efficiency by an optimized filters purification system using waste heat in metal industry
Purification and disposal of production effluents in waste water from metal manu¬fakturing processes is of economical and ecological importance for the Joh. Pengg AG. Econamical solutions for optimised purification of the filter textiles and the drying of the filter cake with waste heat have been found.
Shutdown factory - Central control and communication system and overall concept for a reduction of energy cost and optimization of resources during the stand-by-mode of industry facilities
Development of solutions to reduce the energy cost during the stand-by-mode of industry facilities. Focus areas: innovative control and communication system for the problem of the shut down and start up, entire concept on energy savings cost during the stand-by-mode, creating awareness concerning the problem in the industry
Solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller
A solar thermal cooling system consisting of a parabolic trough collector field and a steam jet ejector chiller has been developed. The necessary components were built and tested and finally put together to get an operating pilot plant at the test facility.
Sustainable energy supply: Production and import of biomass and bio fuels
The project gives an overview of the supply and demand for biofuels specifically dealing with the situation in Europe and that in threshold and developing countries using case studies as examples. Cases: Sweden and France as importing countries in the EU, and Senegal as a (potential) exporting nation.
THECLA
Waste heat utilisation and use of renewable energy sources in a metal-working enterprise
Use of waste heat and covering of the remaining energy demand by the renewable energy sources hydropower and biomass in a metal-processing company.