Search Results
Quantitative and qualitative identification of relevant secondary raw material flows in Austria
In the course of the raw material initiative, the European Commission classified a number of elements and basic materials (including rare earth elements, gallium, germanium, platinum group metals and tantalum) as critical raw materials because of their doubtful future access. In order to operate appropriate recycling of these particular critical raw materials, the primary aim of the present project is to identify the waste streams and to investigate their quality and the quantity of critical raw materials. As a basis for presented aim a "Secondary Raw Material Map Austria 2030", which represents the theoretical, the real and in the future reachable potential of this critical secondary raw materials, is developed.
Development of high quality ecological solutions for thermal insulation systems on the basis of reed
Exterior and interior insulation systems containing reed as insulation material were developed. The solutions integrate insulation material, fastening and plaster (as well as optional heating for the interior insulation). A concept for the renovation of an old building using a reed insulation system was developed.
Sustainability Research: Internationalisation of an existing Research Model for Sustainable Investment
The project's purpose was to adapt the existing rfu sustainability model for an improved international utilization. The developed elements (rating scale, sector structure, weighting model, etc.) have become content of several documents (description of the model, etc.) and instruments (Rating-Tool, Data Pool).
Sustainability Management System - Improvement and completion of the SMS by involvement of stakeholders
Comprehensive implementation of the SMS in four Austrian companies with a specific focus on the conceptual development of a companywide stakeholder management. Distribution of the project results through the publication of the praxis hand book "Systemic Sustainable Management"
EasyCell - Design optimization of PEM fuel cells for reducing auxilliaries and simplificating the material-management to facilitate the mass production
EasyCell - A common use of PEM fuel cells is not yet established. It is the aim of this project to optimize the design of PEM fuel cells (minimization of peripheral units, simplified handling of gases and the right design for mass production) to ease a widespread use of PEM fuel cells.
PROMISE - Production with solar energy. Study on the potential of thermal solar energy systems in trade and industry depending on the production processes
Documentation of realized plants for the use of thermal solar energy in trade and industry companies. Identification of production processes and branches, which have a demand for low-temperature heat. Determine the potential of solarthermal systems to provide low-temperature heat. Case studies for branches and processes with the highest mid-term potential for realization of a solar plant.
Implementation of a cascaded use of stone-fruit residual-mass - Practice-oriented planning for installing a pilot plant for manufacturing marketable products
NAWARO-CASCADING PILOT has investigated professional biocascading strategies for fruit stone utilization (pits from apricots, peaches, cherries and plums) in order to convert them valuable products (novelties like delicacies, cosmetics and technical abrasives) as well as establishing a practice- oriented network.
GREEN BIOREFINERY - Technical, economic and ecological optimisation of value chains by the introduction and efficient use of sustainable raw materials (SUSPRISE Joint Call)
Green Biorefinery stands for the sustainable and highly integrated processing of green biomass into multiple products. The project deals with the assessment and development of required technology for selected feedstock and evaluates market potential for out-products as well as the implementation potential for introduced processes.
Increasing of the resources-efficiency by experimental optimisation of steam production and by reduction of production residues in a metal-processing factory
The project is based on the results of the currently running project "Use of waste heat and renewable energy sources in a metal-processing factory". In this project it was found, that nearly the half of the consumption of natural gas is needed for steam production. Based on calculations already carried out, it is planned to investigate experimentally the possibilities of increasing the resource-efficiency by lowering the steam temperature and by replacing steam by hot water. Further increasing of resource-efficiency shall be achieved by use of internal residues as an additional fuel in a solid fuel furnace.
Sustainable outdoor use of larch wood through classification of durability by means of innovative measurement methods
In this project the utilisation of untreated larch wood is promoted by means of innovative measuring-technologies. optic-spectroscopic measurements are linked to extractive contents and mass-decay, in order to predict the "natural durability". The innovative measurement process allows a quick and accurate estimate of natural durability during the manufacturing process.
Reprocessing of used goods - A strategy of sustainability and ist impact on the supply chain of a "factory of tomorrow"
Objective is to improve the competitiveness of reprocessing-activities as strategies towards higher resource productivity.The study will analyse the changes of the supply chain necessary to achieve this beyond the Point of Sale with regard to the re-integration of used goods in the supply chain.
Environmental Label PLUS / Umweltzeichen PLUS (UZ+): Extension of the Austrian Environmental Label towards Sustainability
Aspects of sustainable beyond pure ecological goals become increasingly important for consumers, corporations and the general public. The well-known Austrian Environmental Label should be extended to meet these comprehensive requirements.
Adjustment of the value chain in the mass-shoe-production to customized production by unitized products and processes
Main topic of the project is the incremental change of business logics in mass shoe production by changing product-push to customer-pull concepts. Results need to integrate the entire supply chain, add value to the brand and its products and contribute to the company's sustainability.
Raise in efficiency due to optimized waste heat management in heat intensive processes of the metal-working industry
This project drives at optimizing the energy input at the manufacturing process of oil tempered spring steel. This aim is met by investigating different options of waste heat recovery from industrial furnaces and heat insulation of heat treatment bathes. Besides, options of lead removal from anthracite will be listed.
Integration of aspects of sustainable investment into the training programme of selected financial service providers
Awareness raising and knowledge transfer by means of information processing and training of financial service providers concerning sustainable investment
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes
Development and optimization of a parabolic trough solar collector for generation of process heat for industrial processes. The operating performance and optimization possibilities of a prototype were evaluated and an improved prototype was tested with respect to its efficiency characteristics as well as in a small-scale application with a realistic load profile.
INTOKI- Methods and tools for consumers' and stakeholder involvement in the development of sustainable products and services
Supporting SME bakeries in the involvement process of their stakeholders in sustainability oriented product service innovation processes. Development and pilot testing of a dialogue oriented toolkit ("The INNOVATIVE Bakery Dialogue" Handbook).
PSS-ÖB - Strategies to deal with barriers to the implementation of ecoefficient Product-Service-Systems in Public Procurement
Analysis of factors that support or hinder the implementation of Product-Service-Systems in public procurement, development of strategies to overcome those obstacles and investiga-tion and documentation of available Good-Practice-Examples.
Assessment of user requirements and technical feasibility of lightweight applications based on renewables
Assessment of user requirements was studied. Furthermore, the technical feasibility of se-lected lightweight applications based on renewables in the furniture and interior design sector is investigated through involvement of all relevant stakeholders (panel manufacturers - further processing enterprises - distributors - consumers) in the value chain.
Environmental, Material Flow and Sustainability Management Accounting - Offensive diffusion in adult education
Diffusion of the "Factory of Tomorrow" project line on environmental and material flow cost accounting (EMA and MFCA) for corporate and national system boundaries, as well as related tools for sustainability accounting in existing post graduate studies.