Suchergebnisse für "Factsheet: Energietechnologien gestalten, die für alle sinnvoll und nutzbar sind"
DiCYCLE - Reconsidering digital deconstruction, reuse and recycle processes using BIM and Blockchain
Analyse und Abbildung von End-of-Life-Prozessen im Bauwesen und deren Optimierung durch Kopplung digitaler Technologien - BIM, Blockchain und Smart Contracts, für eine transparente Erfassung und Nachverfolgung der Wiederverwendung und Wiederverwertung von Baumaterialen und Bauelementen entlang des Lebenszyklus.
Einsatz von Augmented Reality zur Abnahme und Qualitätssicherung auf Baustellen (AR-AQ-Bau)
Ziel dieses Forschungsprojektes ist die Entwicklung eines baustellentauglichen Augmented-Reality-(AR)-Systems inklusive eines Remote-Expert-System und eines BIM-Closed-Loop Datenübertragungssystem zur Verbesserung der Bauqualität, Gebäudesicherheit und Energieeffizienz sowie zur Effizienzsteigerung im Baucontrolling.
Schriftenreihe
5/2022
Ch. Schranz, H. Urban, H. Kaufmann, Ch. Schönauer, J. Rattenberger, P. O’Brien, L. Ozeraitis, P. Jaritz
Deutsch, 62 Seiten
Downloads zur Publikation
Digitalisierung in der Stadtplanung: Von der Raumplanung bis zur Digitalisierung im Bauwesen (PBM_integrativ)
Das Projekt schafft einen Überblick zu den behördlichen, wirtschaftlichen und planerischen Grundlagen und Verflechtungen sowie zum Informationsfluss bzw. zu -defiziten für die Planungs-, Bau- und Betriebsphasen im Lebenszyklus von Gebäuden.
Schriftenreihe
11/2021
R. Giffinger, A. Redlein, R. Kalasek, F. Pühringer, A. Brugger, A. Kammerhofer, P. Kerschbaum
Herausgeber: BMK
Deutsch, 88 Seiten
Downloads zur Publikation
BIM2BEM Flow - Kontinuierliche, BIM-basierte Energieeffizienzplanung
Durch eine automatisierte Integrierung und Zuweisung der Austauschanforderungen zwischen Entwurfs- und Simulationsprogramm anhand der ausgearbeiteten Austauschinformationsanforderungen soll eine kontinuierliche Energieeffizienzplanung entlang der Entwurfsphase ermöglicht werden.
Reconsidering digital deconstruction, reuse and recycle processes using BIM and Blockchain (DiCYCLE)
Analyse und Abbildung von End-of-Life-Prozessen im Bauwesen und deren Optimierung durch Kopplung digitaler Technologien - BIM, Blockchain und Smart Contracts, für eine transparente Erfassung und Nachverfolgung der Wiederverwendung und Wiederverwertung von Baumaterialen und Bauelementen entlang des Lebenszyklus.
Schriftenreihe
27/2026
M. Srećković, I. Kovacic, D. Hartmann, P. Krauser, M. Kjäer, T. Preindl, W. Kastner, T. Romm, A. Crudici, J. Flaszynska, P. Bauer, A. Kessler, P. Kneidinger, F. Kessler, P. Heinrich
Herausgeber: BMIMI
Deutsch, 105 Seiten
Downloads zur Publikation
Digitaler Zwilling / Building Tracker - Kopplung der Gebäudesimulation mit physischen Gebäuden in Echtzeit
Ziel des Projektes ist die Kopplung eines Bürogebäudes in der Betriebsphase mit seinem virtuellen Zwilling, dem "Building-Tracker", der im Projekt entwickelt und erstmalig eingesetzt wird. Mit Hilfe der Kopplung von Monitoring und Simulation ist ein innovatives Gebäudeenergiemanagement zur Erreichung von nahe Nullenergiegebäuden möglich.
ReSpace – Reclaiming Spaces
ReSpace entwickelt ein KI-gestütztes Modell zur Identifikation, Kategorisierung und Aktivierung versiegelter Flächen. Dabei werden bestehende Datenquellen (Luft- und Satellitenbilder, Mobilfunkdaten, Grundbucheinträge) integriert und mit einer dynamischen Analyse angereichert, um evidenzbasierte Handlungsempfehlungen abzuleiten.
Build4Climate - Demonstrationsgebäude mit Klimaraum-Konzept am Campus der Lakeside Science & Technology Park GmbH in Kärnten
Nahe des Wörthersees in Kärnten entsteht ein modernes OpenSpace Forschungs- und Büroeinheitengebäude mit flexibler Nutzung innerhalb des Campus des Lakeside Science & Technology Park GmbH. Dieses innovative Gebäude wird als ‚Leuchtturm‘ mit einem „Klimaraum“-Konzept, das auf Bauteilaktivierung und umfassender Nutzung von erneuerbaren Energieträgern basiert, umgesetzt.
Kontinuierliche BIM-basierte Energieeffizienzplanung (BIM2BEM-Flow)
Durch eine automatisierte Integrierung und Zuweisung der Austauschanforderungen zwischen Entwurfs- und Simulationsprogramm anhand der ausgearbeiteten Austauschinformationsanforderungen, soll eine kontinuierliche Energieeffizienzplanung entlang der Entwurfsphase ermöglicht werden.
Schriftenreihe
1/2026
J. Miller, R. Pfluger, A. Jäger, R. Breu, M. Hauer, G. Fröch
Herausgeber: BMIMI
Deutsch, 24 Seiten
Downloads zur Publikation
sustAIn4Build - AI competence for sustainable building management in climate neutral cities
The objective of the project sustAIn4Build is to increase energy efficiency and sustainability in the building sector by using artificial intelligence (AI). Industry-specific training programs support Austrian companies to develop a workflow for integrating AI technologies into their processes, enabling them to develop resource-saving, cost-effective and sustainable solutions. This strengthens their competitiveness and contributes to the achievement of European decarbonisation goals.
ReSpace – Reclaiming Spaces
ReSpace is developing an AI-based model for identifying, categorizing, and activating sealed areas. Existing data sources (aerial and satellite images, mobile network data, land registry entries) are integrated and enhanced with dynamic analysis to derive evidence-based recommendations for action.
GeoDatKlim - Geo Data and Satellite Data for Carbon Neutral Cities
The Vienna Geospace Hub innovation lab will help optimize the application of geospatial and satellite data to solve complex urban challenges. The innovation lab serves as a networking platform for administration, science, economy, as well as a development and test environment for innovative use cases.
Urban Sky - Satellite-based planning and analysis applications for climate-neutral and resilient cities
The project investigates how satellite data can support cities and municipalities (e.g. urban development, spatial energy planning, mobility transition). Based on demand and potential analyses, service concepts will be derived that integrate existing data and tools with satellite applications. The results will be presented in a study and a Space4Cities implementation roadmap.
3D*3B - 3D-Concret Printing, Reinforcement for low carbon and bending stressed structures.
The project is about 3D printed structural elements and their integration in building structures. The focus is predominantly set on bending stresses structural elements like panels and slabs. Results will point out technical, logistic and climate relevant aspects.
BIMpeco - Environmentally relevant product data in collaborative BIM environments
Construction products can pose a risk to the environment and health due to their pollutant content or releases. In the BIMpeco project, workflows and data structures for digital information management of this environmentally relevant product data are developed. For this purpose, the new ISO standards ISO 23387 and ISO 19650-1 are tested and synchronized with established process flows. The project results will be made available on an open-source basis and can be integrated into any Common Data Environment (CDE) that complies with the standards mentioned. The BIMpeco project is the first to lay the foundations for product information management of environmentally relevant properties in the CDE, covering the entire lifecycle and supply chain.
AIA4ALL - development of open, modular and automatable employer’s information requirements (EIR) and BIM execution plan (BEP)
The Employer's Information Requirements - EIR (German: AIA) - serves the client to define goals and use cases for a BIM-based construction project. The aim of this project was to create a modular, machine-readable AIA that can be seamlessly integrated into the tool landscape of openBIM projects. An open platform for creating use cases for the AIA was developed.
BIM2BEM Flow - Continuous BIM-based energy efficient planning
Automated integration and assignment of exchange requirements between the design and simulation programs, based on the elaborated exchange information requirements, should enable continuous energy efficiency planning along the design phase.
Digital Submission - Preparation of planning and decision-making processes, digitisation of building permit procedures (D-SUB)
The aim of this project was to develop and evaluate the foundation for the implementation of digital processes for building permit procedures in Styria. The project started with the recording, processing, and validation of the actual processes of building permit procedures of the city of Graz and the municipality of Stainach-Pürgg.
Digitalization in Urban Planning: From Spatial Energy Planning to Digitalization in Construction Engineering (PBM_integrativ)
The project provides a comprehensive overview of conditions and interrelations between administration, economy and planning and to elaborate the most important features and deficits in the flow of relevant information between the different phases of a building’s life cycle - planning, construction and management/administration.
Green SandboxBuilder - Regulatory sandboxes in the field of sustainable construction and renovation
In the "Green SandboxBuilder" project, for the first time in Austria, the need for regulatory sandboxes for ecologically sustainable and climate-effective projects in the building sector had been systematically explored. The implementation of regulatory sandboxes in the Austrian construction sector can contribute to decisively accelerating the introduction of technological, procedural and social innovations and thus to achieving the sustainability goals.